Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support HW queue leasing, allowing co

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP

- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible

- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints

- Remove the rtnl_lock use from IP Multicast Routing

- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two

- Report TCP delayed ack timer information via socket diag

- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space

- Add support for per-route tunsrc in IPv6 segment routing

- Start work of switching sockopt handling to iov_iter

- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up

- Support MSG_EOR in MPTCP

- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage

- Remove UDP-Lite support (as announced in 2023)

- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection

Cross-tree stuff:

- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it

Netfilter:

- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.

Florian W reports this gets us ~13% higher packet rate

- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex

- Add more opinionated input validation to lower security exposure

- Make IPVS hash tables to be per-netns and resizable

Wireless:

- Finished assoc frame encryption/EPPKE/802.1X-over-auth

- Radar detection improvements

- Add 6 GHz incumbent signal detection APIs

- Multi-link support for FILS, probe response templates and client
probing

- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware

Driver API:

- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs

- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)

- Add configuration API for completion writeback buffering (implement
in mana)

- Support driver-initiated change of RSS context sizes

- Support DPLL monitoring input frequency (implement in zl3073x)

- Support per-port resources in devlink (implement in mlx5)

Misc:

- Expand the YAML spec for Netfilter

Drivers

- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management

- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support

- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling

- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration

- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool

- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics

- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO

- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs

- Cellular:
- IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...

show more ...

Merge branch 'tools-ynl-convert-samples-into-selftests'

Jakub Kicinski says:

====================
tools: ynl: convert samples into selftests

The "samples" were always poor man's tests, used to man

Merge branch 'tools-ynl-convert-samples-into-selftests'

Jakub Kicinski says:

====================
tools: ynl: convert samples into selftests

The "samples" were always poor man's tests, used to manually
confirm that C YNL works as expected. Since a proper tests/
directory now exists move the samples and use the kselftest
harness to turn them into selftests outputting KTAP.
====================

Link: https://patch.msgid.link/20260307033630.1396085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert rt-route sample to selftest

Convert rt-route.c to use kselftest_harness.h with FIXTURE/TEST_F.
This is the last test to convert so clean up the Makefile.

Validate that the conne

tools: ynl: convert rt-route sample to selftest

Convert rt-route.c to use kselftest_harness.h with FIXTURE/TEST_F.
This is the last test to convert so clean up the Makefile.

Validate that the connected routes for 192.168.1.0/24 and
2001:db8::/64 appear in the dump.

Output:

TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_route.dump ...
# oif: nsim0 dst: 192.168.1.0/24
# oif: lo dst: ::1/128
# oif: nsim0 dst: 2001:db8::1/128
# oif: nsim0 dst: 2001:db8::/64
# oif: nsim0 dst: fe80::/64
# oif: nsim0 dst: ff00::/8
# OK rt_route.dump
ok 1 rt_route.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: move samples to tests

The "samples" were always poor man's tests (used to manually
confirm that C YNL works).

Move all C sample programs from tools/net/ynl/samples/ to
tools/net/ynl/tes

tools: ynl: move samples to tests

The "samples" were always poor man's tests (used to manually
confirm that C YNL works).

Move all C sample programs from tools/net/ynl/samples/ to
tools/net/ynl/tests/, "merge" the Makefiles. The subsequent
changes will convert each sample into a proper KTAP selftests.

Since these are now tests rather than samples - default to
enabling asan. After all we're testing user space code here.

Sort the gitignore while at it, the page-pool entry was a leftover
so delete it.

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...