Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support HW queue leasing, allowing co

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP

- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible

- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints

- Remove the rtnl_lock use from IP Multicast Routing

- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two

- Report TCP delayed ack timer information via socket diag

- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space

- Add support for per-route tunsrc in IPv6 segment routing

- Start work of switching sockopt handling to iov_iter

- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up

- Support MSG_EOR in MPTCP

- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage

- Remove UDP-Lite support (as announced in 2023)

- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection

Cross-tree stuff:

- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it

Netfilter:

- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.

Florian W reports this gets us ~13% higher packet rate

- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex

- Add more opinionated input validation to lower security exposure

- Make IPVS hash tables to be per-netns and resizable

Wireless:

- Finished assoc frame encryption/EPPKE/802.1X-over-auth

- Radar detection improvements

- Add 6 GHz incumbent signal detection APIs

- Multi-link support for FILS, probe response templates and client
probing

- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware

Driver API:

- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs

- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)

- Add configuration API for completion writeback buffering (implement
in mana)

- Support driver-initiated change of RSS context sizes

- Support DPLL monitoring input frequency (implement in zl3073x)

- Support per-port resources in devlink (implement in mlx5)

Misc:

- Expand the YAML spec for Netfilter

Drivers

- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management

- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support

- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling

- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration

- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool

- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics

- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO

- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs

- Cellular:
- IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...

show more ...

Merge branch 'ynl-ethtool-netlink-fix-nla_len-overflow-for-large-string-sets'

Hangbin Liu says:

====================
ynl/ethtool/netlink: fix nla_len overflow for large string sets

This series add

Merge branch 'ynl-ethtool-netlink-fix-nla_len-overflow-for-large-string-sets'

Hangbin Liu says:

====================
ynl/ethtool/netlink: fix nla_len overflow for large string sets

This series addresses a silent data corruption issue triggered when ynl
retrieves string sets from NICs with a large number of statistics entries
(e.g. mlx5_core with thousands of ETH_SS_STATS strings).

The root cause is that struct nlattr.nla_len is a __u16 (max 65535
bytes). When a NIC exports enough statistics strings, the
ETHTOOL_A_STRINGSET_STRINGS nest built by strset_fill_set() exceeds
this limit. nla_nest_end() silently truncates the length on assignment,
producing a corrupted netlink message.

Patch 1 moves ethtool.py to selftest.

Patch 2 improves the ethtool tool: rename the doit/dumpit helpers
to do_set/do_get and convert do_get to use ynl.do() with an
explicit device header instead of a full dump with client-side filtering.

Patch 3 adds a --dbg-small-recv option to the YNL ethtool tool,
matching the same option already present in cli.py, to help debug netlink
message size issues

Patch 4 adds a new helper nla_nest_end_safe() to check whether the nla_len
is overflow and return -EMSGSIZE early if so.

Patch 5 uses the new helper in ethtool to make sure the ethtool doesn't
reply a corrupted netlink message.
====================

Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-0-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: move ethtool.py to selftest

We have converted all the samples to selftests. This script is
the last piece of random "PoC" code we still have lying around.
Let's move it to tests.

Signed

tools: ynl: move ethtool.py to selftest

We have converted all the samples to selftests. This script is
the last piece of random "PoC" code we still have lying around.
Let's move it to tests.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-1-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: tests: fix leading space on Makefile target

The ../generated/protos.a rule had a spurious leading space before the
target name. In make, target rules must start at column 0; only recipe

tools: ynl: tests: fix leading space on Makefile target

The ../generated/protos.a rule had a spurious leading space before the
target name. In make, target rules must start at column 0; only recipe
lines are indented with a tab. The extra space caused make to misparse
the rule.

Remove the leading space to match the style of the adjacent
../lib/ynl.a rule.

Fixes: e0aa0c61758f ("tools: ynl: move samples to tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-ynl_makefile-v1-1-f9624acc2ad9@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'tools-ynl-convert-samples-into-selftests'

Jakub Kicinski says:

====================
tools: ynl: convert samples into selftests

The "samples" were always poor man's tests, used to man

Merge branch 'tools-ynl-convert-samples-into-selftests'

Jakub Kicinski says:

====================
tools: ynl: convert samples into selftests

The "samples" were always poor man's tests, used to manually
confirm that C YNL works as expected. Since a proper tests/
directory now exists move the samples and use the kselftest
harness to turn them into selftests outputting KTAP.
====================

Link: https://patch.msgid.link/20260307033630.1396085-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert rt-route sample to selftest

Convert rt-route.c to use kselftest_harness.h with FIXTURE/TEST_F.
This is the last test to convert so clean up the Makefile.

Validate that the conne

tools: ynl: convert rt-route sample to selftest

Convert rt-route.c to use kselftest_harness.h with FIXTURE/TEST_F.
This is the last test to convert so clean up the Makefile.

Validate that the connected routes for 192.168.1.0/24 and
2001:db8::/64 appear in the dump.

Output:

TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_route.dump ...
# oif: nsim0 dst: 192.168.1.0/24
# oif: lo dst: ::1/128
# oif: nsim0 dst: 2001:db8::1/128
# oif: nsim0 dst: 2001:db8::/64
# oif: nsim0 dst: fe80::/64
# oif: nsim0 dst: ff00::/8
# OK rt_route.dump
ok 1 rt_route.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert rt-addr sample to selftest

Convert rt-addr.c to use kselftest_harness.h with FIXTURE/TEST_F.

Validate that the addresses configured by the wrapper (192.168.1.1
and 2001:db8::1)

tools: ynl: convert rt-addr sample to selftest

Convert rt-addr.c to use kselftest_harness.h with FIXTURE/TEST_F.

Validate that the addresses configured by the wrapper (192.168.1.1
and 2001:db8::1) appear in the dump.

Output:

TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN rt_addr.dump ...
# lo: 127.0.0.1
# nsim0: 192.168.1.1
# lo: ::1
# nsim0: 2001:db8::1
# nsim0: fe80::7c66:c9ff:fe5f:bf01
# OK rt_addr.dump
ok 1 rt_addr.dump
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert ethtool sample to selftest

Convert ethtool.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move ethtool from BINS to TEST_GEN_FILES and add ethtool.sh wrapper
which sets up a n

tools: ynl: convert ethtool sample to selftest

Convert ethtool.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move ethtool from BINS to TEST_GEN_FILES and add ethtool.sh wrapper
which sets up a netdevsim device before running the test binary.

Output:

TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN ethtool.channels ...
# nsim0: combined 1
# OK ethtool.channels
ok 1 ethtool.channels
# RUN ethtool.rings ...
# nsim0: rx 512 tx 512
# OK ethtool.rings
ok 2 ethtool.rings
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert devlink sample to selftest

Convert devlink.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move devlink from BINS to TEST_GEN_FILES in the Makefile since
it's invoked via the d

tools: ynl: convert devlink sample to selftest

Convert devlink.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move devlink from BINS to TEST_GEN_FILES in the Makefile since
it's invoked via the devlink.sh wrapper which sets up netdevsim.

Output:

TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN devlink.dump ...
# netdevsim/netdevsim1337
# OK devlink.dump
ok 1 devlink.dump
# RUN devlink.info ...
# netdevsim/netdevsim1337:
# driver: netdevsim
# running fw:
# fw.mgmt: 10.20.30
# OK devlink.info
ok 2 devlink.info
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: add netdevsim wrapper library for YNL tests

Some tests need netdevsim setup which is painful to do from C.

Add ynl_nsim_lib.sh, a shared library providing nsim_setup and
nsim_cleanup fu

tools: ynl: add netdevsim wrapper library for YNL tests

Some tests need netdevsim setup which is painful to do from C.

Add ynl_nsim_lib.sh, a shared library providing nsim_setup and
nsim_cleanup functions for tests that need a netdevsim device.

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert tc and tc-filter-add samples to selftest

Convert tc.c and tc-filter-add.c to produce KTAP output with
kselftest_harness. Merge the two tests together. They both
test TC one is te

tools: ynl: convert tc and tc-filter-add samples to selftest

Convert tc.c and tc-filter-add.c to produce KTAP output with
kselftest_harness. Merge the two tests together. They both
test TC one is testing qdisc and the other classifiers but
they can easily live in a single selftest.

Make the test spawn a new netns, and run the operations on
lo to avoid onerous setup and cleanup.

TAP version 13
1..2
# Starting 2 tests from 1 test cases.
# RUN tc.qdisc ...
# lo: fq_codel limit: 10240p target: 5ms new_flow_cnt: 0
# OK tc.qdisc
ok 1 tc.qdisc
# RUN tc.flower ...
# flower pref 1 proto: 0x8100
# flower:
# vlan_id: 100
# vlan_prio: 5
# num_of_vlans: 3
# action order: 1 vlan push id 200 protocol 0x8100 priority 0
# action order: 2 vlan push id 300 protocol 0x8100 priority 0
# OK tc.flower
ok 2 tc.flower
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert rt-link sample to selftest

Convert rt-link.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move rt-link from BINS to TEST_GEN_PROGS.

Output:

TAP version 13
1..3
# Start

tools: ynl: convert rt-link sample to selftest

Convert rt-link.c to use kselftest_harness.h with FIXTURE/TEST_F.
Move rt-link from BINS to TEST_GEN_PROGS.

Output:

TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN rt_link.dump ...
# 1: lo: mtu 65536
# 2: sit0: mtu 1480 kind sit
# OK rt_link.dump
ok 1 rt_link.dump
# RUN rt_link.netkit ...
# 4: nk1: mtu 1500 kind netkit primary 1 policy blackhole
# OK rt_link.netkit
ok 2 rt_link.netkit
# RUN rt_link.netkit_err_msg ...
# OK rt_link.netkit_err_msg
ok 3 rt_link.netkit_err_msg
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert ovs sample to selftest

Convert ovs.c to produce KTAP output with kselftest_harness.
The single "crud" test creates a new OVS datapath, fetches it back
by name, then dumps all dat

tools: ynl: convert ovs sample to selftest

Convert ovs.c to produce KTAP output with kselftest_harness.
The single "crud" test creates a new OVS datapath, fetches it back
by name, then dumps all datapaths verifying the new one appears.

IIRC I added this test because ovs is a genetlink family but
has a family-specific fixed header.

TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN ovs.crud ...
# get:
# ynl-test(3): pid:0 cache:256
# dump:
# ynl-test(3): pid:0 cache:256
# OK ovs.crud
ok 1 ovs.crud
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: convert netdev sample to selftest

Convert netdev.c to produce KTAP output with 3 tests:
- dev_dump: dump all netdev devices, skip if empty
- dev_get: query first device from dump by ifin

tools: ynl: convert netdev sample to selftest

Convert netdev.c to produce KTAP output with 3 tests:
- dev_dump: dump all netdev devices, skip if empty
- dev_get: query first device from dump by ifindex
- ntf_check: subscribe to "mgmt", create a veth via rt-link,
verify netdev notification is received, then delete the veth

Remove stdin/scanf-based UI. Add rt-link dependency for the veth
notification test.

TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN netdev.dump ...
# lo[1] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# sit0[2] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# OK netdev.dump
ok 1 netdev.dump
# RUN netdev.get ...
# lo[1] xdp-features (0): xdp-rx-metadata-features (0): xsk-fea...
# OK netdev.get
ok 2 netdev.get
# RUN netdev.ntf_check ...
# veth0[7] xdp-features (0): xdp-rx-metadata-features (7): timesta...
# OK netdev.ntf_check
ok 3 netdev.ntf_check
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: move samples to tests

The "samples" were always poor man's tests (used to manually
confirm that C YNL works).

Move all C sample programs from tools/net/ynl/samples/ to
tools/net/ynl/tes

tools: ynl: move samples to tests

The "samples" were always poor man's tests (used to manually
confirm that C YNL works).

Move all C sample programs from tools/net/ynl/samples/ to
tools/net/ynl/tests/, "merge" the Makefiles. The subsequent
changes will convert each sample into a proper KTAP selftests.

Since these are now tests rather than samples - default to
enabling asan. After all we're testing user space code here.

Sort the gitignore while at it, the page-pool entry was a leftover
so delete it.

Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260307033630.1396085-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'tools-ynl-tests-adjust-makefile-to-mimic-ksft'

Jakub Kicinski says:

====================
tools: ynl: tests: adjust Makefile to mimic ksft

Make a few minor adjustments to tools/net/yn

Merge branch 'tools-ynl-tests-adjust-makefile-to-mimic-ksft'

Jakub Kicinski says:

====================
tools: ynl: tests: adjust Makefile to mimic ksft

Make a few minor adjustments to tools/net/ynl/tests/Makefile
to align its behavior more with how real kselftests behave.
This series allows running the YNL tests in NIPA with little
extra integration effort.

If anyone already integrated these tests into their CI minor
adjustments to the integration may be needed (due to patch 2).
====================

Link: https://patch.msgid.link/20260303163504.2084981-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: produce kselftest-list.txt from tests

Executors will need kselftest-list.txt so create it when
tests are installed.

Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Ha

tools: ynl: produce kselftest-list.txt from tests

Executors will need kselftest-list.txt so create it when
tests are installed.

Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260303163504.2084981-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: support INSTALL_PATH in the tests Makefile

We have modelled the YNL tests after ksft to be able to reuse
the NIPA wrappers. Make sure YNL honors INSTALL_PATH not just
DESTDIR, ksft uses

tools: ynl: support INSTALL_PATH in the tests Makefile

We have modelled the YNL tests after ksft to be able to reuse
the NIPA wrappers. Make sure YNL honors INSTALL_PATH not just
DESTDIR, ksft uses INSTALL_PATH.

Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260303163504.2084981-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: don't install tests in /usr/bin/

Until commit 790792ebc960 ("tools: ynl: don't install tests")
YNL selftests were installed with all the other YNL outputs.
That's no longer the case, as

tools: ynl: don't install tests in /usr/bin/

Until commit 790792ebc960 ("tools: ynl: don't install tests")
YNL selftests were installed with all the other YNL outputs.
That's no longer the case, as tests are not really production
artifacts. Let's not install them in /usr/bin at all, and
mirror kselftest format more closely:

For: make -C tools/net/ynl/tests/ install DESTDIR=tmp

tmp/usr/share/kselftest
├── ktap_helpers.sh
└── ynl
├── test_ynl_cli.sh
└── test_ynl_ethtool.sh

Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260303163504.2084981-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

tools: ynl: rename TESTS variable to TEST_PROGS

Use the standard kselftest variable naming for tests in the Makefile.
NIPA depends on being able to selectively target tests by setting
those variable

tools: ynl: rename TESTS variable to TEST_PROGS

Use the standard kselftest variable naming for tests in the Makefile.
NIPA depends on being able to selectively target tests by setting
those variables on the CLI.

Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260303163504.2084981-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>