Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for

Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.

Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding

ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B

HD- and USB-audio:
- Many quirks as usual"

* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...

show more ...

Merge tag 'asoc-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v7.0

This release is almost all abut driers, there's very little core work
h

Merge tag 'asoc-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v7.0

This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:

- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.

We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

ASoC: SOF: Intel: reserve link DMA for sdw bpt stream

Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

Currently, hda_sdw_bpt_dma_prepare() get a HDA stream and use the link
DMA but d

ASoC: SOF: Intel: reserve link DMA for sdw bpt stream

Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:

Currently, hda_sdw_bpt_dma_prepare() get a HDA stream and use the link
DMA but doesn't reserve it. It works fine because we assume the
SwoundWire BPT will not run with audio streams simultaneously. Create
and use the new helpers to reserve the link DMA and allow running BPT
and audio stream simultaneously.

Pierre adds:

For the record this solution has two issues not documented in any commit
message:

a) this will not work in 'dspless' mode, where the link DMA is not
enabled. That's probably fine given that no one used that mode in
production, but that's a software restriction that you will not be able
to undo.

b) this raise the question of how bandwidth will be managed. The premise
of BPT is that it uses all the bus bandwidth to guarantee predictable
firmware download times. If the available bandwidth is restricted by
other audio streams, then mechanically the startup latency will be
increased and vary - or you will have to run the bus at a higher
frequency to provision enough bandwidth for BPT but that means higher
power consumption. Or you will have to change the bus clock dynamically
which is possible at the hardware level for SDCA parts but not legacy
ones.

I am not going to lay on the tracks for this low-level set of changes,
but you'll have to address the b) opens for future contributions.

show more ...

ASoC: SOF: Intel: hda-sdw-bpt: support simultaneous audio and BPT streams

Currently the SoundWire BPT stream uses the paired link DMA but not
reserve it. It works without any issue because we assume

ASoC: SOF: Intel: hda-sdw-bpt: support simultaneous audio and BPT streams

Currently the SoundWire BPT stream uses the paired link DMA but not
reserve it. It works without any issue because we assume the SoundWire
BPT will not run with audio streams simultaneously.
To support simultaneous audio and BPT streams, we need to use the
hda_dma_prepare/cleanup helpers to reserve the pair link host DMA.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

ASoC: SOF: Support for on-demand DSP boot

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

On system suspend / resume we always power up the DSP and boot the
firmware, which is no

ASoC: SOF: Support for on-demand DSP boot

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.

Similarly, on jack insert/removal we needlesly boot up the firmware to check
the jack status, which needs no DSP/firmware communication.

The on-demand DSP boot will make sure that we boot the DSP firmware up only
when it is needed - for audio activity, in other cases the firmware will be
not booted up, which saves time.

Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.

With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.

In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout

Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.

The on-demand boot has been tested in our CI for more than half a year
and so far no issues have been seen on supported platforms since it's
introduction to our development tree (sof-dev).

show more ...

ASoC: SOF: Intel: hda-sdw-bpt: Add support for on-demand DSP boot

If on-demand DSP boot is used we need to make sure that the DSP is booted
up - which might not be the case - since we need ChainDMA

ASoC: SOF: Intel: hda-sdw-bpt: Add support for on-demand DSP boot

If on-demand DSP boot is used we need to make sure that the DSP is booted
up - which might not be the case - since we need ChainDMA in normal, non
DSPless mode for the BRA to work.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

Pull soundwire updates from Vinod Koul:

- Support for multiple sections in a BPT stream

-

Merge tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire

Pull soundwire updates from Vinod Koul:

- Support for multiple sections in a BPT stream

- Align DMA frame with BPT frames

- Qualcomm support for v3.1.0 controllers

* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index

show more ...

ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment

The dma buffer need to be a multiple of data block size and
the fifo size. Export a function to return the LCM of data
block size and the f

ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment

The dma buffer need to be a multiple of data block size and
the fifo size. Export a function to return the LCM of data
block size and the fifo size.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>