Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull lsm updates from Paul Moore:

- Move the LSM framework to static calls

This transitions the vast ma

Merge tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull lsm updates from Paul Moore:

- Move the LSM framework to static calls

This transitions the vast majority of the LSM callbacks into static
calls. Those callbacks which haven't been converted were left as-is
due to the general ugliness of the changes required to support the
static call conversion; we can revisit those callbacks at a future
date.

- Add the Integrity Policy Enforcement (IPE) LSM

This adds a new LSM, Integrity Policy Enforcement (IPE). There is
plenty of documentation about IPE in this patches, so I'll refrain
from going into too much detail here, but the basic motivation behind
IPE is to provide a mechanism such that administrators can restrict
execution to only those binaries which come from integrity protected
storage, e.g. a dm-verity protected filesystem. You will notice that
IPE requires additional LSM hooks in the initramfs, dm-verity, and
fs-verity code, with the associated patches carrying ACK/review tags
from the associated maintainers. We couldn't find an obvious
maintainer for the initramfs code, but the IPE patchset has been
widely posted over several years.

Both Deven Bowers and Fan Wu have contributed to IPE's development
over the past several years, with Fan Wu agreeing to serve as the IPE
maintainer moving forward. Once IPE is accepted into your tree, I'll
start working with Fan to ensure he has the necessary accounts, keys,
etc. so that he can start submitting IPE pull requests to you
directly during the next merge window.

- Move the lifecycle management of the LSM blobs to the LSM framework

Management of the LSM blobs (the LSM state buffers attached to
various kernel structs, typically via a void pointer named "security"
or similar) has been mixed, some blobs were allocated/managed by
individual LSMs, others were managed by the LSM framework itself.

Starting with this pull we move management of all the LSM blobs,
minus the XFRM blob, into the framework itself, improving consistency
across LSMs, and reducing the amount of duplicated code across LSMs.
Due to some additional work required to migrate the XFRM blob, it has
been left as a todo item for a later date; from a practical
standpoint this omission should have little impact as only SELinux
provides a XFRM LSM implementation.

- Fix problems with the LSM's handling of F_SETOWN

The LSM hook for the fcntl(F_SETOWN) operation had a couple of
problems: it was racy with itself, and it was disconnected from the
associated DAC related logic in such a way that the LSM state could
be updated in cases where the DAC state would not. We fix both of
these problems by moving the security_file_set_fowner() hook into the
same section of code where the DAC attributes are updated. Not only
does this resolve the DAC/LSM synchronization issue, but as that code
block is protected by a lock, it also resolve the race condition.

- Fix potential problems with the security_inode_free() LSM hook

Due to use of RCU to protect inodes and the placement of the LSM hook
associated with freeing the inode, there is a bit of a challenge when
it comes to managing any LSM state associated with an inode. The VFS
folks are not open to relocating the LSM hook so we have to get
creative when it comes to releasing an inode's LSM state.
Traditionally we have used a single LSM callback within the hook that
is triggered when the inode is "marked for death", but not actually
released due to RCU.

Unfortunately, this causes problems for LSMs which want to take an
action when the inode's associated LSM state is actually released; so
we add an additional LSM callback, inode_free_security_rcu(), that is
called when the inode's LSM state is released in the RCU free
callback.

- Refactor two LSM hooks to better fit the LSM return value patterns

The vast majority of the LSM hooks follow the "return 0 on success,
negative values on failure" pattern, however, there are a small
handful that have unique return value behaviors which has caused
confusion in the past and makes it difficult for the BPF verifier to
properly vet BPF LSM programs. This includes patches to
convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.

- Various cleanups and improvements

A handful of patches to remove redundant code, better leverage the
IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
minor style fixups.

* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
security: Update file_set_fowner documentation
fs: Fix file_set_fowner LSM hook inconsistencies
lsm: Use IS_ERR_OR_NULL() helper function
lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
ipe: Remove duplicated include in ipe.c
lsm: replace indirect LSM hook calls with static calls
lsm: count the LSMs enabled at compile time
kernel: Add helper macros for loop unrolling
init/main.c: Initialize early LSMs after arch code, static keys and calls.
MAINTAINERS: add IPE entry with Fan Wu as maintainer
documentation: add IPE documentation
ipe: kunit test for parser
scripts: add boot policy generation program
ipe: enable support for fs-verity as a trust provider
fsverity: expose verified fsverity built-in signatures to LSMs
lsm: add security_inode_setintegrity() hook
ipe: add support for dm-verity as a trust provider
dm-verity: expose root hash digest and signature data to LSMs
block,lsm: add LSM blob and new LSM hooks for block devices
ipe: add permissive toggle
...

show more ...

ipe: enable support for fs-verity as a trust provider

Enable IPE policy authors to indicate trust for a singular fsverity
file, identified by the digest information, through "fsverity_digest"
and al

ipe: enable support for fs-verity as a trust provider

Enable IPE policy authors to indicate trust for a singular fsverity
file, identified by the digest information, through "fsverity_digest"
and all files using valid fsverity builtin signatures via
"fsverity_signature".

This enables file-level integrity claims to be expressed in IPE,
allowing individual files to be authorized, giving some flexibility
for policy authors. Such file-level claims are important to be expressed
for enforcing the integrity of packages, as well as address some of the
scalability issues in a sole dm-verity based solution (# of loop back
devices, etc).

This solution cannot be done in userspace as the minimum threat that
IPE should mitigate is an attacker downloads malicious payload with
all required dependencies. These dependencies can lack the userspace
check, bypassing the protection entirely. A similar attack succeeds if
the userspace component is replaced with a version that does not
perform the check. As a result, this can only be done in the common
entry point - the kernel.

Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...

ipe: add support for dm-verity as a trust provider

Allows author of IPE policy to indicate trust for a singular dm-verity
volume, identified by roothash, through "dmverity_roothash" and all
signed a

ipe: add support for dm-verity as a trust provider

Allows author of IPE policy to indicate trust for a singular dm-verity
volume, identified by roothash, through "dmverity_roothash" and all
signed and validated dm-verity volumes, through "dmverity_signature".

Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: fixed some line length issues in the comments]
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...

audit,ipe: add IPE auditing support

Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malic

audit,ipe: add IPE auditing support

Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE
itself.

This patch introduces 3 new audit events.

AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation
of a resource.
AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy
has been changed to another loaded policy.
AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded
into the kernel.

This patch also adds support for success auditing, allowing users to
identify why an allow decision was made for a resource. However, it is
recommended to use this option with caution, as it is quite noisy.

Here are some examples of the new audit record types:

AUDIT_IPE_ACCESS(1420):

audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=297 comm="sh" path="/root/vol/bin/hello" dev="tmpfs"
ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW"

audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=299 comm="sh" path="/mnt/ipe/bin/hello" dev="dm-0"
ino=2 rule="DEFAULT action=DENY"

audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=300 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs"
ino=131 rule="DEFAULT action=DENY"

The above three records were generated when the active IPE policy only
allows binaries from the initramfs to run. The three identical `hello`
binary were placed at different locations, only the first hello from
the rootfs(initramfs) was allowed.

Field ipe_op followed by the IPE operation name associated with the log.

Field ipe_hook followed by the name of the LSM hook that triggered the IPE
event.

Field enforcing followed by the enforcement state of IPE. (it will be
introduced in the next commit)

Field pid followed by the pid of the process that triggered the IPE
event.

Field comm followed by the command line program name of the process that
triggered the IPE event.

Field path followed by the file's path name.

Field dev followed by the device name as found in /dev where the file is
from.
Note that for device mappers it will use the name `dm-X` instead of
the name in /dev/mapper.
For a file in a temp file system, which is not from a device, it will use
`tmpfs` for the field.
The implementation of this part is following another existing use case
LSM_AUDIT_DATA_INODE in security/lsm_audit.c

Field ino followed by the file's inode number.

Field rule followed by the IPE rule made the access decision. The whole
rule must be audited because the decision is based on the combination of
all property conditions in the rule.

Along with the syscall audit event, user can know why a blocked
happened. For example:

audit: AUDIT1420 ipe_op=EXECUTE ipe_hook=BPRM_CHECK enforcing=1
pid=2138 comm="bash" path="/mnt/ipe/bin/hello" dev="dm-0"
ino=2 rule="DEFAULT action=DENY"
audit[1956]: SYSCALL arch=c000003e syscall=59
success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0
a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0
gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0
ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null)

The above two records showed bash used execve to run "hello" and got
blocked by IPE. Note that the IPE records are always prior to a SYSCALL
record.

AUDIT_IPE_CONFIG_CHANGE(1421):

audit: AUDIT1421
old_active_pol_name="Allow_All" old_active_pol_version=0.0.0
old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649
new_active_pol_name="boot_verified" new_active_pol_version=0.0.0
new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F
auid=4294967295 ses=4294967295 lsm=ipe res=1

The above record showed the current IPE active policy switch from
`Allow_All` to `boot_verified` along with the version and the hash
digest of the two policies. Note IPE can only have one policy active
at a time, all access decision evaluation is based on the current active
policy.
The normal procedure to deploy a policy is loading the policy to deploy
into the kernel first, then switch the active policy to it.

AUDIT_IPE_POLICY_LOAD(1422):

audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0
policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F2676
auid=4294967295 ses=4294967295 lsm=ipe res=1

The above record showed a new policy has been loaded into the kernel
with the policy name, policy version and policy hash.

Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...

ipe: introduce 'boot_verified' as a trust provider

IPE is designed to provide system level trust guarantees, this usually
implies that trust starts from bootup with a hardware root of trust,
which v

ipe: introduce 'boot_verified' as a trust provider

IPE is designed to provide system level trust guarantees, this usually
implies that trust starts from bootup with a hardware root of trust,
which validates the bootloader. After this, the bootloader verifies
the kernel and the initramfs.

As there's no currently supported integrity method for initramfs, and
it's typically already verified by the bootloader. This patch introduces
a new IPE property `boot_verified` which allows author of IPE policy to
indicate trust for files from initramfs.

The implementation of this feature utilizes the newly added
`initramfs_populated` hook. This hook marks the superblock of the rootfs
after the initramfs has been unpacked into it.

Before mounting the real rootfs on top of the initramfs, initramfs
script will recursively remove all files and directories on the
initramfs. This is typically implemented by using switch_root(8)
(https://man7.org/linux/man-pages/man8/switch_root.8.html).
Therefore the initramfs will be empty and not accessible after the real
rootfs takes over. It is advised to switch to a different policy
that doesn't rely on the `boot_verified` property after this point.
This ensures that the trust policies remain relevant and effective
throughout the system's operation.

Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...

ipe: add LSM hooks on execution and kernel read

IPE's initial goal is to control both execution and the loading of
kernel modules based on the system's definition of trust. It
accomplishes this by p

ipe: add LSM hooks on execution and kernel read

IPE's initial goal is to control both execution and the loading of
kernel modules based on the system's definition of trust. It
accomplishes this by plugging into the security hooks for
bprm_check_security, file_mprotect, mmap_file, kernel_load_data,
and kernel_read_data.

Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

show more ...