Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux

Pull crypto library updates from Eric Biggers:

- Migrate more hash algorithms from the traditional c

Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux

Pull crypto library updates from Eric Biggers:

- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/

Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:

- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)

- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code

- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library

- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later

- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits

- Enable optimizations by default

- GHASH

- Migrate the standalone GHASH code into lib/crypto/

- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory

- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed

- Enable optimizations by default

- SM3

- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it

- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms

- Testing improvements:

- Add a KUnit test suite for each of the new library APIs

- Migrate the existing ChaCha20Poly1305 test to KUnit

- Make the KUnit all_tests.config enable all crypto library tests

- Move the test kconfig options to the Runtime Testing menu

- Other updates to arch-optimized crypto code:

- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine

- Remove some MD5 implementations that are no longer worth keeping

- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64

- Make jitterentropy and samples/tsm-mr use the crypto library APIs

* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...

show more ...

crypto: sm3 - Rename CRYPTO_SM3_GENERIC to CRYPTO_SM3

The kconfig options for generic crypto API modules have traditionally
*not* had a "_GENERIC" suffix. Also, the "_GENERIC" suffix will make
even

crypto: sm3 - Rename CRYPTO_SM3_GENERIC to CRYPTO_SM3

The kconfig options for generic crypto API modules have traditionally
*not* had a "_GENERIC" suffix. Also, the "_GENERIC" suffix will make
even less sense once the architecture-optimized SM3 code is moved into
lib/crypto/ and the "sm3" crypto_shash is reimplemented on top of that.

Thus, rename CRYPTO_SM3_GENERIC to CRYPTO_SM3.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
"Carrying the IMA measurement list across kexec is not a n

Merge tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
"Carrying the IMA measurement list across kexec is not a new feature,
but is updated to address a couple of issues:

- Carrying the IMA measurement list across kexec required knowing
apriori all the file measurements between the "kexec load" and
"kexec execute" in order to measure them before the "kexec load".
Any delay between the "kexec load" and "kexec exec" exacerbated the
problem.

- Any file measurements post "kexec load" were not carried across
kexec, resulting in the measurement list being out of sync with the
TPM PCR.

With these changes, the buffer for the IMA measurement list is still
allocated at "kexec load", but copying the IMA measurement list is
deferred to after quiescing the TPM.

Two new kexec critical data records are defined"

* tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: do not copy measurement list to kdump kernel
ima: measure kexec load and exec events as critical data
ima: make the kexec extra memory configurable
ima: verify if the segment size has changed
ima: kexec: move IMA log copy from kexec load to execute
ima: kexec: define functions to copy IMA log at soft boot
ima: kexec: skip IMA segment validation after kexec soft reboot
kexec: define functions to map and unmap segments
ima: define and call ima_alloc_kexec_file_buf()
ima: rename variable the seq_file "file" to "ima_kexec_file"

show more ...

ima: make the kexec extra memory configurable

The extra memory allocated for carrying the IMA measurement list across
kexec is hard-coded as half a PAGE. Make it configurable.

Define a Kconfig opt

ima: make the kexec extra memory configurable

The extra memory allocated for carrying the IMA measurement list across
kexec is hard-coded as half a PAGE. Make it configurable.

Define a Kconfig option, IMA_KEXEC_EXTRA_MEMORY_KB, to configure the
extra memory (in kb) to be allocated for IMA measurements added during
kexec soft reboot. Ensure the default value of the option is set such
that extra half a page of memory for additional measurements is allocated
for the additional measurements.

Update ima_add_kexec_buffer() function to allocate memory based on the
Kconfig option value, rather than the currently hard-coded one.

Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>