Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.q

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager Page Splitting for KVM RISC-V
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest

show more ...

Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

Merge tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are two new mystery SoCs with very little public information

Merge tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are two new mystery SoCs with very little public information
about them so far, Qualcomm's Cortex-A78C based "Shikra" and Altera's
Cortex-A720 based Agilex72 SOCFPGA.

We have also gained support for a couple of SoCs from the 2023/2024
timeframe that have been in the making for a while:

- The Apple platform gains support for M3 Pro, Max and Ultra SoC,
following the basic M3 support from 7.2.

- Samsung Exynos 1580 is a high-end mobile phone SoC from 2024

- Canaan K230 is a RISC-V based 64-bit AI SoC, based on the earlier
K210 chip

- Sophgo SG2000 is a mixed Arm/RISC-V chip that was already supported
using the Arm core but is now also added for RISC-V along with
several other variants of the cv18xx series

In terms of newly added machines we have reference platforms for all
the chips above, plus

- Only four 32-bit Arm boards: two older phones and two older
industrial/embedded boards; using Allwinner, Qualcomm and Rockchip
SoCs

- Three laptops und three phones using Qualcomm SoCs

- Ten 64-bit Rockchips based single-board computers, along with one
NAS box and a game console.

- Seven industrial/embedded boards and modules using NXP i.MX8/9
SoCs.

- A Lenovo desktop box based on NVIDIA Jetson Xavier NX

- A few more single-board computers based on Allwinnner A133,
Spacemit K1 and TI AM62.

As usual, there is a constant stream of minor cleanups and fixes
towards addressing the 'dt-check-style --mode strict' warnings, and
everyone is expected to address those warnings for new submissions
now"

* tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (864 commits)
Revert "riscv: dts: spacemit: k3: add i2s0-i2s5 nodes"
Documentation/process: maintainer-soc: Mention expectation about dt-check-style
ARM: dts: helios4: add SATA regulator supplies
ARM: dts: helios4: add vcc-supply to GPIO expander
ARM: dts: helios4: add vcc-supply to EEPROM
arm64: dts: turris-mox: fix usb3 phys
arm64: dts: ti: Correct white-space style
arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node
arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
...

show more ...

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

Merge tag 'ti-k3-dts-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v7.3

SoC Specific Changes:

AM64:
- Non critical clock ID update

Merge tag 'ti-k3-dts-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt

TI K3 device tree updates for v7.3

SoC Specific Changes:

AM64:
- Non critical clock ID update for ICSSG MDIO

Board Specific Changes:

AM62L BeagleBadge:
- New AM62L based BeagleBadge board

Variscite VAR-SOM-AM62(P):
- Add support for Variscite VAR-SOM-AM62 and Symphony carrier board
- var-som-am62p: Fix Ethernet PHY configuration and update audio codec
configuration
- am62p5-var-som-symphony: Add touchscreen and TPM support

AM69 Aquila (Toradex):
- DSI adapters and Display addon board overlays
- OV5640 CSI camera overlays

AM62x (Toradex Verdin):
- DSI adapters and Display addon board overlays

AM62P-Verdin:
- Add Toradex OV5640 CSI camera overlay
- Add NAU8822 Bridge Tied Load audio support

AM642 TQMa64xxl:
- Misc non-urgent fixes

AM67A BeagleY-AI:
- Setup I2C for CSI/DSI connectors and add DSI0/CSI1 mux
- Add IMX219 CSI0/CSI1 camera overlays
- Add gpio line names

AM68 phyBOARD-Izar:
- Add pwm fan support

AM625-BeaglePlay:
- Add LincolnTech OLDI LCD-185 overlay

AM625-SK:
- Add Microtips OLDI SK-LCD1 overlay

AM62L:
- Add bootph-all property to usb0

AM62A7-SK:
- Add bootph-all property in cpsw_mac_syscon node

* tag 'ti-k3-dts-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (37 commits)
arm64: dts: ti: Correct white-space style
arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node
arm64: dts: ti: k3-am67a-beagley-ai: Add gpio line names
arm64: dts: ti: k3-am62a7-sk: Add bootph-all property in cpsw_mac_syscon node
arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI1
arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI0
arm64: dts: ti: k3-am67a-beagley-ai: Add DSI0/CSI1 mux
arm64: dts: ti: k3-am67a-beagley-ai: Setup I2C for CSI/DSI connectors
arm64: dts: ti: Add LincolnTech OLDI LCD-185 Overlay for AM625-BeaglePlay
arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan
arm64: dts: ti: Add Microtips OLDI SK-LCD1 Overlay for AM625-SK
arm64: dts: ti: k3-am62l: Add bootph to usb0
arm64: dts: ti: k3-am62x-verdin: Share UART_4 MCU reservation overlay
arm64: dts: ti: k3-am62p-verdin: Add Toradex OV5640 CSI Cameras
arm64: dts: ti: k3-am62p-verdin: Add NAU8822 Bridge Tied Load
arm64: dts: ti: k3-am62-verdin: Add RPi Touch Display 2 7-inch
arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS
arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display
arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2
arm64: dts: am62p5-var-som-symphony: add TPM support
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI1

RPi v2 Camera (IMX219) is an 8MP camera that can be used with BeagleY AI
through the 22-pin CSI-RX connectors. Add a DT overlay to

arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI1

RPi v2 Camera (IMX219) is an 8MP camera that can be used with BeagleY AI
through the 22-pin CSI-RX connectors. Add a DT overlay to enable use of
this camera sensor through the CSI1 connector.

The CSI1 connector is muxed with DSI0, so ensure that we route it to
CSI1 (DSI_CSI_OE=0 and DSI_CSI_SEL=1).

Link: https://pip.raspberrypi.com/categories/1205-drawings-and-schematics
Link: https://docs.beagle.cc/boards/beagley/ai/03-design.html#id60
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Link: https://patch.msgid.link/20260602-beagley-cameras-v3-4-fe6ae35b7eda@ideasonboard.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI0

RPi v2 Camera (IMX219) is an 8MP camera that can be used with BeagleY AI
through the 22-pin CSI-RX connectors. Add a DT overlay to

arm64: dts: ti: k3-am67a-beagley-ai: Add overlay for IMX219 on CSI0

RPi v2 Camera (IMX219) is an 8MP camera that can be used with BeagleY AI
through the 22-pin CSI-RX connectors. Add a DT overlay to enable use of
this camera sensor through the CSI0 connector.

Link: https://pip.raspberrypi.com/categories/1205-drawings-and-schematics
Link: https://docs.beagle.cc/boards/beagley/ai/03-design.html#csi
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Rishikesh Donadkar <r-donadkar@ti.com>
Link: https://patch.msgid.link/20260602-beagley-cameras-v3-3-fe6ae35b7eda@ideasonboard.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: Add LincolnTech OLDI LCD-185 Overlay for AM625-BeaglePlay

The panel is Lincoln Technology Solutions LCD185-101CT[0]. It is a
Dual-Link LVDS panel and supports WUXGA resolution (1920x

arm64: dts: ti: Add LincolnTech OLDI LCD-185 Overlay for AM625-BeaglePlay

The panel is Lincoln Technology Solutions LCD185-101CT[0]. It is a
Dual-Link LVDS panel and supports WUXGA resolution (1920x1200).
Furthermore, it has an i2c based touch controller: Goodix-GT928.

Add DT overlay for the OLDI panel to connect with BeaglePlay platform.

[0]: https://lincolntechsolutions.com/wp-content/uploads/2024/09/LCD185-101CTL1ARNTT_DS_R1.3.pdf

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20260715073531.2346803-1-s-jain1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan

Add an overlay to control the pwm fan[0] that comes with the kit.

[0] https://www.sepa-europe.com/en/2023/06/16/axial-fan-lf40p/

Signed-off-by: D

arm64: dts: ti: k3-am68-phyboard-izar: Add pwm fan

Add an overlay to control the pwm fan[0] that comes with the kit.

[0] https://www.sepa-europe.com/en/2023/06/16/axial-fan-lf40p/

Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260716000827.84982-1-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: Add Microtips OLDI SK-LCD1 Overlay for AM625-SK

The panel is Microtips Technology USA MF-101HIEBCAF0[1]. It is a
Dual-Link LVDS panel and supports WUXGA resolution (1920x1200).
Furth

arm64: dts: ti: Add Microtips OLDI SK-LCD1 Overlay for AM625-SK

The panel is Microtips Technology USA MF-101HIEBCAF0[1]. It is a
Dual-Link LVDS panel and supports WUXGA resolution (1920x1200).
Furthermore, it has an i2c based touch controller: Ilitek-ILI2511.

Add DT overlay for the OLDI Panel.

[1]: https://www.ti.com/tool/SK-LCD1

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20260723073341.3229436-1-s-jain1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62x-verdin: Share UART_4 MCU reservation overlay

Verdin AM62 and AM62P both expose mcu_uart0 as Verdin UART_4, and the
reservation needed when this UART is used by the MCU firmw

arm64: dts: ti: k3-am62x-verdin: Share UART_4 MCU reservation overlay

Verdin AM62 and AM62P both expose mcu_uart0 as Verdin UART_4, and the
reservation needed when this UART is used by the MCU firmware is
identical on both SoMs.

Rename the AM625-specific overlay added in commit ca61bcec3e8a ("arm64:
dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F") to a common
k3-am62x-verdin overlay and use it for both AM625 and AM62P5 Verdin
combined DTBs. This avoids carrying identical SoC-specific overlays for
each remoteproc firmware/peripheral combination.

Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://patch.msgid.link/20260716184300.85413-8-ivitro@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62p-verdin: Add Toradex OV5640 CSI Cameras

Add device tree overlays for the Toradex OV5640 CSI Cameras on Verdin
AM62P CSI_1. Two variants are supported: the current CSI Camera

arm64: dts: ti: k3-am62p-verdin: Add Toradex OV5640 CSI Cameras

Add device tree overlays for the Toradex OV5640 CSI Cameras on Verdin
AM62P CSI_1. Two variants are supported: the current CSI Camera Set 5MP
OV5640 with a 27 MHz oscillator and the legacy CSI Camera Module 5MP
OV5640 with a 24 MHz oscillator.

Link: https://developer.toradex.com/hardware/accessories/cameras/csi-camera-module-5mp-ov5640-arducam
Link: https://developer.toradex.com/hardware/legacy-products/other/csi-camera-module-5mp-ov5640/
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://patch.msgid.link/20260716184300.85413-7-ivitro@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62p-verdin: Add NAU8822 Bridge Tied Load

Add a device tree overlay enabling Bridge Tied Load (BTL) mode on the
Nuvoton NAU8822 audio codec present on the Verdin Development Boar

arm64: dts: ti: k3-am62p-verdin: Add NAU8822 Bridge Tied Load

Add a device tree overlay enabling Bridge Tied Load (BTL) mode on the
Nuvoton NAU8822 audio codec present on the Verdin Development Board.
In BTL mode, the two loudspeaker outputs are bridged to deliver higher
output power on the X28 speaker connector.

Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://patch.msgid.link/20260716184300.85413-6-ivitro@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62-verdin: Add RPi Touch Display 2 7-inch

Add a device tree overlay for the Raspberry Pi Touch Display 2 7" on
the Verdin DSI_1 interface.

Link: https://www.raspberrypi.com/pro

arm64: dts: ti: k3-am62-verdin: Add RPi Touch Display 2 7-inch

Add a device tree overlay for the Raspberry Pi Touch Display 2 7" on
the Verdin DSI_1 interface.

Link: https://www.raspberrypi.com/products/touch-display-2/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260715055446.31139-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS

Add a device tree overlay enabling the Toradex Capacitive Touch Display
10.1" LVDS V2 on the Verdin Development Board wi

arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS

Add a device tree overlay enabling the Toradex Capacitive Touch Display
10.1" LVDS V2 on the Verdin Development Board with Verdin AM62 Mezzanine
expansion board. The panel connects via the AM62 OLDI0 on the Mezzanine
LVDS interface (J10). The panel is an Opto Logic SCX1001511GGC49 10.1" WXGA
TFT LCD LVDS and the touch input is provided by an ILITEK ILI251x
capacitive touch controller.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260623195741.495734-6-leoreis.costa@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display

Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
Toradex Capacitive Touch Display 10.1

arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display

Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
Toradex Capacitive Touch Display 10.1" LVDS V2. The adapter connects to the
Verdin DSI_1 interface. It is based on the Texas Instruments SN65DSI84
DSI-to-LVDS bridge and drives an Opto Logic SCX1001511GGC49 10.1" WXGA TFT
LCD LVDS panel. Touch input is provided by an ILITEK ILI251x capacitive
touch controller.

Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260623195741.495734-5-leoreis.costa@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2

Add a device tree overlay for the Toradex Capacitive Touch Display 10.1"
LVDS V2 connected via Verdin AM62 OLDI on

arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2

Add a device tree overlay for the Toradex Capacitive Touch Display 10.1"
LVDS V2 connected via Verdin AM62 OLDI on carrier boards exposing LVDS
interface (e.g., Mallow). The panel is an Opto Logic SCX1001511GGC49 10.1"
WXGA TFT LCD and the touch input is provided by an ILITEK ILI251x
capacitive touch controller.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260623195741.495734-4-leoreis.costa@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: var-som-am62: Add support for Variscite Symphony Board

Add device tree support for the Variscite Symphony carrier board with
the VAR-SOM-AM62 system on module.

The Symphony board in

arm64: dts: ti: var-som-am62: Add support for Variscite Symphony Board

Add device tree support for the Variscite Symphony carrier board with
the VAR-SOM-AM62 system on module.

The Symphony board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart interfaces
- OV5640 Camera support
- GPIO Expander and TPM
- CAN, I2C and general purpose interfaces
- Capacitive touch controller

Link: https://www.variscite.it/product/single-board-computers/symphony-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Link: https://patch.msgid.link/42decef4f84db8fc0474675a23e157b68b3b1a1b.1783864932.git.stefano.r@variscite.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...

arm64: dts: ti: k3-am69-aquila: Add Toradex OV5640 CSI cameras

Add device tree overlays for the Toradex OV5640 CSI cameras on Aquila
CSI_1 and CSI_2. Two variants are supported for each interface: t

arm64: dts: ti: k3-am69-aquila: Add Toradex OV5640 CSI cameras

Add device tree overlays for the Toradex OV5640 CSI cameras on Aquila
CSI_1 and CSI_2. Two variants are supported for each interface: the
current CSI Camera Set 5MP OV5640 with a 27 MHz oscillator and the legacy
CSI Module 5MP OV5640 with a 24 MHz oscillator.

On the Aquila AM69 Development Board, CSI_1 is exposed on connector J70
and CSI_2 is exposed on connector J71.

Link: https://developer.toradex.com/hardware/accessories/cameras/csi-camera-module-5mp-ov5640-arducam
Link: https://developer.toradex.com/hardware/legacy-products/other/csi-camera-module-5mp-ov5640/
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260602115123.1324474-16-ivitro@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

show more ...