arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist

Add support for the Geist board based on the Renesas R-Car R8A779MD (M3Le)
SoC, a register-compatible variant of the R8A77965

arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist

Add support for the Geist board based on the Renesas R-Car R8A779MD (M3Le)
SoC, a register-compatible variant of the R8A77965 (M3-N) with reduced set
of peripherals.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Nguyen Tran <nguyen.tran.pz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260522172000.15096-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board

Add the initial device tree for the Renesas RZ/G3L SMARC EVK board.

Added placeholders to avoid compilation error with the co

arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board

Add the initial device tree for the Renesas RZ/G3L SMARC EVK board.

Added placeholders to avoid compilation error with the common code in
renesas-smarc2.dtsi.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260324114329.268249-12-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for Olimex MIPI-HDMI adapter

Add a DT overlay to bind the Olimex MIPI-HDMI dual-lane DSI-to-HDMI adapter
on the Retronix R-Car V4H Sparrow Hawk board.

arm64: dts: renesas: sparrow-hawk: Add overlay for Olimex MIPI-HDMI adapter

Add a DT overlay to bind the Olimex MIPI-HDMI dual-lane DSI-to-HDMI adapter
on the Retronix R-Car V4H Sparrow Hawk board.

Current device link is at https://www.olimex.com/Products/IoT/ESP32-P4/MIPI-HDMI/open-source-hardware

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260320025328.509003-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for WaveShare Display 13.3"

Add a DT overlay to bind the WaveShare 13.3inch 1920x1080 DSI Capacitive
Touch Display on the Retronix R-Car V4H Sparrow Ha

arm64: dts: renesas: sparrow-hawk: Add overlay for WaveShare Display 13.3"

Add a DT overlay to bind the WaveShare 13.3inch 1920x1080 DSI Capacitive
Touch Display on the Retronix R-Car V4H Sparrow Hawk board.

Current device link is at https://www.waveshare.com/13.3inch-dsi-lcd.htm

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260117005028.126361-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: r9a09g057h48-kakip: Add pixpaper display overlay

Add device tree overlay to support the MayQueen PixPaper e-paper display
on the Renesas RZ/V2H EVK (KAKIP board). The display is

arm64: dts: renesas: r9a09g057h48-kakip: Add pixpaper display overlay

Add device tree overlay to support the MayQueen PixPaper e-paper display
on the Renesas RZ/V2H EVK (KAKIP board). The display is connected via
SPI0 interface and uses GPIO pins for reset, busy, and DC control.

The overlay configures:
- RSPI0 pinmux for SPI communication (MOSI, MISO, CLK, CE0),
- PixPaper display device with proper GPIO assignments,
- SPI frequency set to 1MHz for stable operation.

This enables support for the Open-EP Community pixpaper-213-c module on
the RZ/V2H platform.

Signed-off-by: Wig Cheng <onlywig@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260124163611.3279104-1-onlywig@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: r8a78000: Add initial Ironhide board support

Add initial support for the Renesas Ironhide board, which is based on
the R-Car X5H (R8A78000) SoC.

Signed-off-by: Hai Pham <hai.ph

arm64: dts: renesas: r8a78000: Add initial Ironhide board support

Add initial support for the Renesas Ironhide board, which is based on
the R-Car X5H (R8A78000) SoC.

Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Vinh Nguyen <vinh.nguyen.xz@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
[Kuninori: tidyup for upstreaming]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87ecrwa3fj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for Argon40 fan HAT

Add a DT overlay to bind the Argon40 fan HAT on the Retronix R-Car V4H
Sparrow Hawk board. Fan RPM control and full RPM on reboot

arm64: dts: renesas: sparrow-hawk: Add overlay for Argon40 fan HAT

Add a DT overlay to bind the Argon40 fan HAT on the Retronix R-Car V4H
Sparrow Hawk board. Fan RPM control and full RPM on reboot has been
tested.

Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250907161130.218470-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for RPi Display 2

Add a DT overlay to bind the Raspberry Pi Display 2 (both 5" and 7"
variants), on the Retronix R-Car V4H Sparrow Hawk board. All of

arm64: dts: renesas: sparrow-hawk: Add overlay for RPi Display 2

Add a DT overlay to bind the Raspberry Pi Display 2 (both 5" and 7"
variants), on the Retronix R-Car V4H Sparrow Hawk board. All of display
output, touch controller, and backlight control have been tested.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250904202838.172579-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J2

Add an overlay to connect an IMX462 camera sensor to the J2 connector.
The IMX462 utilizes 4 CSI-2 D-PHY lanes. This enables the video

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J2

Add an overlay to connect an IMX462 camera sensor to the J2 connector.
The IMX462 utilizes 4 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI41 Rx to be enabled to process images from the
sensor.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250905084050.310651-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J1

Add an overlay to connect an IMX462 camera sensor to the J1 connector.
The IMX462 utilizes 4 CSI-2 D-PHY lanes. This enables the video

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J1

Add an overlay to connect an IMX462 camera sensor to the J1 connector.
The IMX462 utilizes 4 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI40 Rx to be enabled to process images from the
sensor.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250905084050.310651-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J2

Add an overlay to connect an IMX219 camera sensor to the J2 connector.
The IMX219 utilizes 2 CSI-2 D-PHY lanes. This enables the video

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J2

Add an overlay to connect an IMX219 camera sensor to the J2 connector.
The IMX219 utilizes 2 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI41 Rx to be enabled to process images from the
sensor.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250905084050.310651-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J1

Add an overlay to connect an IMX219 camera sensor to the J1 connector.
The IMX219 utilizes 2 CSI-2 D-PHY lanes. This enables the video

arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J1

Add an overlay to connect an IMX219 camera sensor to the J1 connector.
The IMX219 utilizes 2 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI40 Rx to be enabled to process images from the
sensor.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250905084050.310651-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial support for the RZ/N2H EVK

Add an initial device tree file for the Renesas RZ/N2H Evaluation Board
(EVK).

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

arm64: dts: renesas: Add initial support for the RZ/N2H EVK

Add an initial device tree file for the Renesas RZ/N2H Evaluation Board
(EVK).

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250617171957.162145-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial support for the Renesas RZ/T2H eval board

Add the initial device tree for the RZ/T2H evaluation board.

Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.c

arm64: dts: renesas: Add initial support for the Renesas RZ/T2H eval board

Add the initial device tree for the RZ/T2H evaluation board.

Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250617162810.154332-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: r8a779g3-sparrow-hawk-fan-pwm: Add missing install target

The target to consider the dtbo file for installation is missing, add
it.

Fixes: a719915e76f2 ("arm64: dts: renesas: r

arm64: dts: renesas: r8a779g3-sparrow-hawk-fan-pwm: Add missing install target

The target to consider the dtbo file for installation is missing, add
it.

Fixes: a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20250701112612.3957799-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add CN15 eMMC and SD overlays for RZ/V2H and RZ/V2N EVKs

Introduce device tree overlays for supporting the eMMC (RTK0EF0186B02000BJ)
and microSD (RTK0EF0186B01000BJ) sub-boards

arm64: dts: renesas: Add CN15 eMMC and SD overlays for RZ/V2H and RZ/V2N EVKs

Introduce device tree overlays for supporting the eMMC (RTK0EF0186B02000BJ)
and microSD (RTK0EF0186B01000BJ) sub-boards connected via the CN15
connector on the RZ/V2H and RZ/V2N evaluation kits.

These overlays enable SDHI0 with appropriate pin control settings, power
regulators, and GPIO handling. Both sub-boards are supported using shared
overlay files that can be applied to either EVK due to their identical
connector layout and interface support.

To support this, new DT overlay files are added:
- `rzv2-evk-cn15-emmc.dtso` for eMMC
- `rzv2-evk-cn15-sd.dtso` for microSD

Additionally, the base DTS files for both EVKs are updated to include a
fixed 1.8V regulator (`reg_1p8v`) needed by the eMMC sub-board and
potential future use cases such as HDMI output.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250627193742.110818-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: r8a779h2: Add Gray Hawk Single support

The Gray Hawk Single board with R-Car V4M-7 (R8A779H2) uses an updated
version of the R-Car V4M (R8A779H0) SoC.

For now, there are no vis

arm64: dts: renesas: r8a779h2: Add Gray Hawk Single support

The Gray Hawk Single board with R-Car V4M-7 (R8A779H2) uses an updated
version of the R-Car V4M (R8A779H0) SoC.

For now, there are no visible differences compared to the variant
equipped with an R-Car V4M (R8A779H0) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/d2e0e7b746063368b83148100aa553cff55b8b60.1750931027.git.geert+renesas@glider.be

show more ...

arm64: dts: renesas: r9a09g047e57-smarc: Enable CRU, CSI support

Enable CRU, I2C0 and CSI on RZ/G3E SMARC EVK and tie the CSI to the
OV5645 sensor using Device Tree overlay. RZ/G3E SMARK EVK is a R

arm64: dts: renesas: r9a09g047e57-smarc: Enable CRU, CSI support

Enable CRU, I2C0 and CSI on RZ/G3E SMARC EVK and tie the CSI to the
OV5645 sensor using Device Tree overlay. RZ/G3E SMARK EVK is a RZ/G2L
alike EVK hence reuse rz-smarc-cru-csi-ov5645.dtsi.

Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250514162422.910114-5-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: sparrow-hawk: Disable dtc spi_bus_bridge check

make dtbs:

arch/arm64/boot/dts/renesas/r8a779g0.dtsi:1269.24-1283.5: Warning (spi_bus_bridge): /soc/spi@e6ea0000: incorrect #

arm64: dts: renesas: sparrow-hawk: Disable dtc spi_bus_bridge check

make dtbs:

arch/arm64/boot/dts/renesas/r8a779g0.dtsi:1269.24-1283.5: Warning (spi_bus_bridge): /soc/spi@e6ea0000: incorrect #address-cells for SPI bus
also defined at arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts:471.9-486.3
arch/arm64/boot/dts/renesas/r8a779g0.dtsi:1269.24-1283.5: Warning (spi_bus_bridge): /soc/spi@e6ea0000: incorrect #size-cells for SPI bus
also defined at arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts:471.9-486.3
arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'

The Sparrow Hawk uses the MSIOF module in I2S mode instead of SPI mode,
triggering a conflict between the SPI bus bindings and dtc:
- Serial engines that can be SPI controllers must use "spi" as their
node names,
- Dtc assumes nodes named "spi" are always SPI controllers.

Fix this by disabling this specific warning for this board.

Fixes: ca764d5321a2cee7 ("arm64: dts: renesas: sparrow-hawk: Add MSIOF Sound support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/20250506192033.77338015@canb.auug.org.au
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/fbad3581f297d5b95a3b2813bbae7dba25a523fd.1747039399.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support

Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board com

arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support

Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.

Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250420173829.200553-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial device tree for RZ/V2N EVK

Add the initial device tree for the Renesas RZ/V2N EVK board, based on
the R9A09G056N48 SoC. Enable basic board functionality, including:

arm64: dts: renesas: Add initial device tree for RZ/V2N EVK

Add the initial device tree for the Renesas RZ/V2N EVK board, based on
the R9A09G056N48 SoC. Enable basic board functionality, including:
- Memory mapping (reserve the first 128MB for the secure area)
- Clock inputs (QEXTAL, RTXIN, AUDIO_EXTAL)
- PINCTRL configurations for peripherals
- Serial console (SCIF)
- SDHI1 with power control and UHS modes

Update the Makefile to include the new DTB.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-13-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial support for MYIR Remi Pi

Add basic support for the MYIR Remi Pi (based on r9a07g044l2):
- UART,
- I2C,
- eMMC,
- USB host,
- HDMI output,
- Ethernet.

Signed-o

arm64: dts: renesas: Add initial support for MYIR Remi Pi

Add basic support for the MYIR Remi Pi (based on r9a07g044l2):
- UART,
- I2C,
- eMMC,
- USB host,
- HDMI output,
- Ethernet.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250131-myir-remi-pi-v3-2-2dda53e79291@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1

Add a DT overlay for SCIF1 (of the Renesas RZ/G3S SoC) routed through
the PMOD1_3A interface available on the Renesas RZ SMARC Car

arm64: dts: renesas: r9a08g045s33-smarc-pmod: Add overlay for SCIF1

Add a DT overlay for SCIF1 (of the Renesas RZ/G3S SoC) routed through
the PMOD1_3A interface available on the Renesas RZ SMARC Carrier II
board.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250120130936.1080069-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board

Add basic support for the Yuridenki-Shokai Kakip board based on
R9A09G057H48, including:
- Memory
- OSTM0 - OSTM7

arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai Kakip board

Add basic support for the Yuridenki-Shokai Kakip board based on
R9A09G057H48, including:
- Memory
- OSTM0 - OSTM7
- Pin Control
- Input clocks
- SCIF
- SDHI0

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250116144752.1738574-5-iwamatsu@nigauri.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board

Add the initial device tree for the Renesas RZ/G3E SMARC EVK board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Revi

arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board

Add the initial device tree for the Renesas RZ/G3E SMARC EVK board.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241203105005.103927-13-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...