Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or

Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:

- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.

- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.

- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6

- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores

- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.

As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.

Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.

A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:

- Three server boards use 32-bit ASpeed BMCs

- One more reference board for 32-bit Microchip LAN9668

- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s

- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588

- Two mobile phones using Snapdragon 845

- A gaming device and a NAS box, both based on Rockchips rk356x

On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"

* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree for v6.20

Introduce the Kaanapali SoC, with the MTP and QRD devic

Merge tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree for v6.20

Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.

Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.

On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.

On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).

On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.

On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.

On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.

On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.

On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.

On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.

On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.

On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.

On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.

On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.

Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).

* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

arm64: dts: qcom: lemans; Add EL2 overlay

All the Lemans IOT variants boards are using Gunyah hypervisor which
means that, so far, Linux-based OS could only boot in EL1 on those
devices. However, i

arm64: dts: qcom: lemans; Add EL2 overlay

All the Lemans IOT variants boards are using Gunyah hypervisor which
means that, so far, Linux-based OS could only boot in EL1 on those
devices. However, it is possible for us to boot Linux at EL2 on these
devices [1].

When running under Gunyah, the remote processor firmware IOMMU streams
are controlled by Gunyah. However, without Gunyah, the IOMMU is managed
by the consumer of this DeviceTree. Therefore, describe the firmware
streams for each remote processor.

Add a EL2-specific DT overlay and apply it to Lemans IOT variant
devices to create -el2.dtb for each of them alongside "normal" dtb.

[1]
https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefi

Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-14-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: qrb2210-rb1: Add overlay for vision mezzanine

This initial version includes support for OV9282 camera sensor.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-

arm64: dts: qcom: qrb2210-rb1: Add overlay for vision mezzanine

This initial version includes support for OV9282 camera sensor.

Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20260108170550.359968-4-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: Add The Fairphone (Gen. 6)

Add a devicetree for The Fairphone (Gen. 6) smartphone, which is based
on the Milos/SM7635 SoC.

Supported functionality as of this initial submission:
*

arm64: dts: qcom: Add The Fairphone (Gen. 6)

Add a devicetree for The Fairphone (Gen. 6) smartphone, which is based
on the Milos/SM7635 SoC.

Supported functionality as of this initial submission:
* Debug UART
* Regulators (PM7550, PM8550VS, PMR735B, PM8008)
* Remoteprocs (ADSP, CDSP, MPSS, WPSS)
* Power Button, Volume Keys, Switch
* PMIC-GLINK (Charger, Fuel gauge, USB-C mode switching)
* Camera flash/torch LED
* SD card
* USB

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-9-b05fddd8b45c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: qrb2210: add dts for Arduino unoq

Arduino UnoQ is a single-board computer combining Qualcomm
Dragonwing™ QRB2210 microprocessor with STMicroelectronics STM32U585
microcontroller.
S

arm64: dts: qcom: qrb2210: add dts for Arduino unoq

Arduino UnoQ is a single-board computer combining Qualcomm
Dragonwing™ QRB2210 microprocessor with STMicroelectronics STM32U585
microcontroller.
Support to a simply boot to shell environment includes:
- UART, I2C, SPI
- onboard LEDS
- eMMC
- WLAN and BT

Signed-off-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251120155825.121483-7-r.mereu.kernel@arduino.cc
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: Add qcs6490-rubikpi3 board dts

Add DTS for Thundercomm qcs6490-rubikpi3 board which uses
QCS6490 SoC.

Works:
- Bluetooth (AP6256)
- Wi-Fi (AP6256)
- Ethernet (AX88179B connected t

arm64: dts: qcom: Add qcs6490-rubikpi3 board dts

Add DTS for Thundercomm qcs6490-rubikpi3 board which uses
QCS6490 SoC.

Works:
- Bluetooth (AP6256)
- Wi-Fi (AP6256)
- Ethernet (AX88179B connected to UPD720201)
- Two USB Type-A 3.0 ports (UPD720201 connected to PCIe0)
- USB Type-A 2.0 port
- USB Type-C
- M.2 M-Key 2280 PCIe 3.0
- FAN
- RTC
- 40PIN: I2C x1, UART x1

Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
Reviewed-by: Roger Shimizu <rosh@debian.org>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126-rubikpi-next-20251125-v7-2-e46095b80529@thundersoft.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: Add support for Pixel 3 and Pixel 3 XL

This adds initial device tree support for the following phones:

- Google Pixel 3 (blueline)
- Google Pixel 3 XL (crosshatch)

Both phone b

arm64: dts: qcom: Add support for Pixel 3 and Pixel 3 XL

This adds initial device tree support for the following phones:

- Google Pixel 3 (blueline)
- Google Pixel 3 XL (crosshatch)

Both phone boards use the same identifiers and differ only slightly
in their connected peripherals.

Supported functionality includes:
- Debug UART
- UFS
- USB-C (peripheral mode)
- Framebuffer (both u-boot and Linux)
- Display (Pixel 3 only, and the driver needs work)
- GPU
- Bluetooth
- Wi-Fi

The rmtfs region is allocated using UIO, making it technically "dynamic."

Its address and size can be read from sysfs:

$ cat /sys/class/uio/uio0/name
/sys/class/uio/uio0/maps/map0/addr
0x00000000f2701000

$ cat /sys/class/uio/uio0/maps/map0/size
0x0000000000200000

Like the OnePlus 6, the Pixel 3 requires 1 kB of reserved memory on either
side of the rmtfs region to work around an XPU bug that would otherwise
cause erroneous violations when accessing the rmtfs_mem region.

Co-developed-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Casey Connolly <casey@connolly.tech>
Signed-off-by: Casey Connolly <casey@connolly.tech>
Co-developed-by: Joel Selvaraj <foss@joelselvaraj.com>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Co-developed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251214-pixel-3-v7-8-b1c0cf6f224d@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: Add support for X1-based Surface Pro 11

Add device trees for the Qualcomm X1E and X1P-based Microsoft Surface
Pro 11 machines (codenamed 'Denali').

This device is very similar to

arm64: dts: qcom: Add support for X1-based Surface Pro 11

Add device trees for the Qualcomm X1E and X1P-based Microsoft Surface
Pro 11 machines (codenamed 'Denali').

This device is very similar to the Surface Laptop 7 ('Romulus').

Use a similar strategy to x1-asus-zenbook-a14.dtsi so that we can create
x1e and x1p-specific flavors of the device tree without too much code
duplication.

Hardware support is similar to other X1 machines. The most notable
missing features are:

- Touchscreen and pen
- Cameras (and status LEDs)

Signed-off-by: Dale Whinham <daleyo@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251220-surface-sp11-for-next-v6-4-81f7451edb77@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: sm8650-hdk: Add support for the Rear Camera Card overlay

To provide access to camera sensors a Rear Camera Card can be connected
to SM8650-HDK board, the camera sensors are:
* Sams

arm64: dts: qcom: sm8650-hdk: Add support for the Rear Camera Card overlay

To provide access to camera sensors a Rear Camera Card can be connected
to SM8650-HDK board, the camera sensors are:
* Samsung S5K33D ToF camera sensor, connected to CSI0 over MIPI D-PHY,
* Sony IMX766 Wide camera sensor, connected to CSI1 over MIPI C-PHY,
* Omnivision OV64B Ultrawide camera sensor, connected to CSI2 over MIPI C-PHY,
* Samsung S5KJN1 Tele camera sensor, connected to CSI3 over MIPI D-PHY).

Get the initial support of Samsung S5KJN1 camera sensor and two flash leds
on the Rear Camera Card board by adding a board overlay.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251204041505.131891-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

arm64: dts: qcom: kaanapali: Add base QRD board

Add initial support for Qualcomm Kaanapali QRD board which enables
SD Card, UFS and booting to shell with UART console.

Written with help from Jishnu

arm64: dts: qcom: kaanapali: Add base QRD board

Add initial support for Qualcomm Kaanapali QRD board which enables
SD Card, UFS and booting to shell with UART console.

Written with help from Jishnu Prakash (added RPMhPD nodes), Nitin Rawat
(added ufs) and Manish Pandey (added SD Card).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-5-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

arm64: dts: qcom: kaanapali: Add base MTP board

Add initial support for Qualcomm Kaanapali MTP board which enables PCIe,
SD Card, UFS and booting to shell with UART console.

Written with help from

arm64: dts: qcom: kaanapali: Add base MTP board

Add initial support for Qualcomm Kaanapali MTP board which enables PCIe,
SD Card, UFS and booting to shell with UART console.

Written with help from Jishnu Prakash (added RPMhPD nodes), Nitin Rawat
(added UFS), Manish Pandey (added SD Card) and Qiang Yu (added PCIe).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-knp-dts-v4-4-1541bebeb89f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

arm64: dts: qcom: Add dts for Medion SPRCHRGD 14 S1

Initial support for the Medion SPRCHRGD 14 S1, which is based on the
Qualcomm Snapdragon X Elite SoC (X1E78100).

Working:
* Touchpad
* Keyboard
*

arm64: dts: qcom: Add dts for Medion SPRCHRGD 14 S1

Initial support for the Medion SPRCHRGD 14 S1, which is based on the
Qualcomm Snapdragon X Elite SoC (X1E78100).

Working:
* Touchpad
* Keyboard
* eDP
* NVMe
* USB Type-C port
* USB-C DP altmode
* HDMI-A port
* WiFi
* Bluetooth
* GPU
* Video decoding
* USB Type-A
* Audio, speakers, microphones
- 4x speakers.
- 2x dmic
- headset
* Camera
* Fingerprint reader

Co-developed-by: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Co-developed-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251204155212.230058-6-ggo@tuxedocomputers.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:

- Ren

Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:

- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.

- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.

- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.

In addition, there are a good number of newly supported machines
across SoC families:

- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers

- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,

- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.

- One Router based on Rockchips RK3568

- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..

- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.

In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"

* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...

show more ...

Merge tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.19

Introduce support for the Redxa Dragon Q6A deve

Merge tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm Arm64 DeviceTree updates for v6.19

Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.

SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.

Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.

On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.

Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.

On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.

On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.

Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.

On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.

The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.

SDX75 DWC3 node is flattened and marked for USB role switching.

On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.

USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.

On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.

The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.

* tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (138 commits)
arm64: dts: qcom: sdx75: Add missing usb-role-switch property
arm64: dts: qcom: sdx75: Flatten usb controller node
arm64: dts: qcom: HAMOA-IOT-SOM: Unreserve GPIOs blocking SPI11 access
arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm
Revert "arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature"
arm64: dts: qcom: kodiak: add coresight nodes
arm64: dts: qcom: sdm845-oneplus: Describe TE gpio
arm64: dts: qcom: sdm845-oneplus: Implement panel sleep pinctrl
arm64: dts: qcom: sdm845-oneplus: Group panel pinctrl
arm64: dts: qcom: sdm845-oneplus: Update compatbible and add DDIC supplies
arm64: dts: qcom: qcs6490-rb3gen2: Rename vph-pwr regulator node
arm64: dts: qcom: qcm6490-fairphone-fp5: Add UW cam actuator
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI pull-up
arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
arm64: dts: qcom: rename x1p42100 to purwa
arm64: dts: qcom: rename sc7280 to kodiak
arm64: dts: qcom: rename qcm2290 to agatti
arm64: dts: qcom: add gpu_zap_shader label
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...