arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit

The Agilex7-M devkit contains an Agilex7M SoC, which is a newly branded
version of the original Agilex SoC. The Agilex7M core peripherals

arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit

The Agilex7-M devkit contains an Agilex7M SoC, which is a newly branded
version of the original Agilex SoC. The Agilex7M core peripherals are
identical to the Agilex SoC.

We can re-use the socfpga_agilex.dtsi for this devkit. The Agilex7-M
devkit supports PCIE 5.0(x16), DDR4, DDR5, LPDDR5 and does not have QSPI.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: socfpga: agilex: add emmc support

The Agilex devkit supports a separate eMMC daughter card. The
eMMC daughter card replaces the SDMMC slot that is on the default
daughter card and thus r

arm64: dts: socfpga: agilex: add emmc support

The Agilex devkit supports a separate eMMC daughter card. The
eMMC daughter card replaces the SDMMC slot that is on the default
daughter card and thus requires a separate board dts file.

Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: socfpga: agilex5: add support for modular board

The Agilex5 Modular board consists of a compute module (Agilex5 SoCFPGA)
attached to a carrier board that provides PCIe and additional sys

arm64: dts: socfpga: agilex5: add support for modular board

The Agilex5 Modular board consists of a compute module (Agilex5 SoCFPGA)
attached to a carrier board that provides PCIe and additional system
interfaces.

Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: socfpga: add Agilex3 board

Agilex3 SoCFPGA development kit is a small form factor board similar to
Agilex5 013b board. Agilex3 is derived from Agilex5 SoCFPGA, with the main
difference o

arm64: dts: socfpga: add Agilex3 board

Agilex3 SoCFPGA development kit is a small form factor board similar to
Agilex5 013b board. Agilex3 is derived from Agilex5 SoCFPGA, with the main
difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.

Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: socfpga: agilex5: add support for 013b board

Agilex5 SoCFPGA 013b is a small form factor development kit.
Supports both tabletop and PCIe add-in card operation. It features
expansion hea

arm64: dts: socfpga: agilex5: add support for 013b board

Agilex5 SoCFPGA 013b is a small form factor development kit.
Supports both tabletop and PCIe add-in card operation. It features
expansion headers for Raspberry Pi 4/5 HATs and Digilent Pmod modules,
enabling integration with popular ecosystems.

Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: socfpga: agilex5: add NAND daughter board

The Agilex5 devkit supports a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the default
daughter card t

arm64: dts: socfpga: agilex5: add NAND daughter board

The Agilex5 devkit supports a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the default
daughter card thus requires a separate board dts file.

Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: agilex5: add initial support for Intel Agilex5 SoCFPGA

Add the initial device tree files for Intel Agilex5 SoCFPGA platform.

Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by

arm64: dts: agilex5: add initial support for Intel Agilex5 SoCFPGA

Add the initial device tree files for Intel Agilex5 SoCFPGA platform.

Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: intel: add device tree for n6000

Add a device tree for the n6000 instantiation of Agilex
Hard Processor System (HPS).

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Si

arm64: dts: intel: add device tree for n6000

Add a device tree for the n6000 instantiation of Agilex
Hard Processor System (HPS).

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA

Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex.

arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA

Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.

The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: n5x: Add support for Intel's eASIC N5X platform

The Intel eASIC N5X platform shares the same register map as the Agilex
platform, thus, we can re-use the socfpga_agilex.dtsi as the base

arm64: dts: n5x: Add support for Intel's eASIC N5X platform

The Intel eASIC N5X platform shares the same register map as the Agilex
platform, thus, we can re-use the socfpga_agilex.dtsi as the base
DTSI.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

arm64: dts: keembay: Add device tree for Keem Bay EVM board

Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.

Link: https:

arm64: dts: keembay: Add device tree for Keem Bay EVM board

Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.

Link: https://lore.kernel.org/r/20200717090414.313530-6-daniele.alessandrelli@linux.intel.com
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: add NAND board files for Stratix10 and Agilex

The Stratix10 and Agilex devkits support a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the defaul

arm64: dts: add NAND board files for Stratix10 and Agilex

The Stratix10 and Agilex devkits support a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the default
daughter card thus requires a separate board dts file.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

show more ...

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project

treewide: Add SPDX license identifier - Makefile/Kconfig

Add SPDX license identifiers to all Make/Kconfig files which:

- Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA

Add the initial device tree files for Intel's Agilex SoCFPGA platform.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>