arm64: dts: add support for A9 based Amlogic BY401

Add basic support for the A9 based Amlogic BY401 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable

arm64: dts: add support for A9 based Amlogic BY401

Add basic support for the A9 based Amlogic BY401 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260423-a9-baisc-dts-v4-2-c26b480a068c@amlogic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

arm64: dts: meson-s4-s905y4-khadas-vim1s: add initial device tree

The Khadas VIM1S uses the Amlogic S905Y4 SoC, based on the
Amlogic S4 SoC family, on a board with the same form factor as the
VIM/VI

arm64: dts: meson-s4-s905y4-khadas-vim1s: add initial device tree

The Khadas VIM1S uses the Amlogic S905Y4 SoC, based on the
Amlogic S4 SoC family, on a board with the same form factor as the
VIM/VIM2/VIM3/VIM4 models. Serial debug console, ethernet, SD card
work with this initial device tree.

It features:
- 2GB LPDDR4 RAM
- 16GB eMMC 5.1 storage
- 32MB SPI flash
- 100M Ethernet
- AP6256 Wireless (802.11 a/b/g/n/ac, BT5.0)
- HDMI 2.1 video
- 2x USB 2.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 2x LED's (1x red, 1x white)
- 3x buttons (power, function, reset)
- IR receiver
- 40pin GPIO Header
- 1x micro SD card slot

Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260115030015.1334517-4-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: meson: add initial device-tree for Tanix TX9 Pro

Oranth Tanix TX9 Pro is based on the Amlogic Q200 reference design with
an S912 chip and the following specs:

- 3GB DDR3 RAM
- 32GB eMMC

arm64: dts: meson: add initial device-tree for Tanix TX9 Pro

Oranth Tanix TX9 Pro is based on the Amlogic Q200 reference design with
an S912 chip and the following specs:

- 3GB DDR3 RAM
- 32GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.0a video
- VFD for clock/status
- 2x USB 2.0 ports
- IR receiver
- 1x Power LED (white)
- 1x Update/Reset button (underside)
- 1x micro SD card slot

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250927125006.824293-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: Add Ugoos AM3

The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC,
with a board design that is very close to the Q20x development boards.
The MMC max-frequency pr

arm64: dts: amlogic: Add Ugoos AM3

The Ugoos AM3 is a small set-top box based on the Amlogic S912 SoC,
with a board design that is very close to the Q20x development boards.
The MMC max-frequency properties are copied from the downstream device
tree.

https://ugoos.com/ugoos-am3-16g

The following functionality has been tested and is known to work:
- debug serial port
- "update" button inside the case
- USB host mode, on all three ports
- HDMI video/audio output
- eMMC, MicroSD, and SDIO WLAN
- S/PDIF audio output
- Ethernet
- Infrared remote control input

The following functionality doesn't seem to work:
- USB role switching and device mode on the "OTG" port
- case LED

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://lore.kernel.org/r/20250613-ugoos-am3-v3-2-f8a43e6bbfdb@posteo.net
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: add support for xiaomi-aquaman/Mi TV Stick

Xiaomi Mi TV Stick is a small Amlogic-based Android TV stick released in
2020. It is known as `xiaomi-aquaman` internally. Specifica

arm64: dts: amlogic: add support for xiaomi-aquaman/Mi TV Stick

Xiaomi Mi TV Stick is a small Amlogic-based Android TV stick released in
2020. It is known as `xiaomi-aquaman` internally. Specifications:
* Amlogic S805Y SoC
* Android TV 9, upgradable to Android TV 10
* 8 GB eMMC
* 1 GB of RAM
* Wi-Fi + Bluetooth

The devicetree is based on p241's DT, with some changes to better match
the Mi TV Stick:
* there is no Ethernet port, no IR, no CVBS connector on the stick
* a white LED is present
* adjust memory to have 1 GB of RAM available

Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Link: https://lore.kernel.org/r/20250502-aquaman-v6-2-f1af347d9709@postmarketos.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add support for S7D based Amlogic BM202

Amlogic S7D is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support fo

arm64: dts: add support for S7D based Amlogic BM202

Amlogic S7D is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support for the S7D based Amlogic BM202 board, Reusing
S7 basic components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250317-s6-s7-basic-v1-7-d653384e41f3@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add support for S7 based Amlogic BP201

Amlogic S7 is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support for

arm64: dts: add support for S7 based Amlogic BP201

Amlogic S7 is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support for the S7 based Amlogic BP201 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250317-s6-s7-basic-v1-6-d653384e41f3@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add support for S6 based Amlogic BL209

Amlogic S6 is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support for

arm64: dts: add support for S6 based Amlogic BL209

Amlogic S6 is an advanced application processor designed for
hybrid OTT/IP Set Top Box and high-end media box applications.

Add basic support for the S6 based Amlogic BL209 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250317-s6-s7-basic-v1-5-d653384e41f3@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: add C3 AW419 board

Add Amlogic C3 C308L AW419 board. The corresponding binding
has been applied, therefore, this series does not need to
add a binding corresponding to the AW419

arm64: dts: amlogic: add C3 AW419 board

Add Amlogic C3 C308L AW419 board. The corresponding binding
has been applied, therefore, this series does not need to
add a binding corresponding to the AW419 board.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-3-b56c0511e9dc@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: meson: add initial support for Dreambox One/Two

Dreambox One and Dreambox Two are based on the Amlogic W400 reference
board with an S922X chip and the following specs:

- 2GB DDR3 RAM
-

arm64: dts: meson: add initial support for Dreambox One/Two

Dreambox One and Dreambox Two are based on the Amlogic W400 reference
board with an S922X chip and the following specs:

- 2GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.1 video
- S/PDIF optical output
- 2x DVB-S2/T2
- Smartcard Reader Slot
- 2x USB 2.0 port (1x micro-USB for service)
- 1x USB 3.0 port
- IR receiver
- 1x Power LED (blue)
- 1x Power button (top)
- 1x Update/Reset button (underside)
- 1x micro SD card slot

Dreambox Two differences:

- 3" Colour LCD display (MIPI-DSI)
- Common Interface Slot

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240622140112.2609534-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: meson: add support for OSMC Vero 4K

The OSMC Vero 4K device is based on the Amlogic S905X (P212)
reference design with the following specifications:

- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.

arm64: dts: meson: add support for OSMC Vero 4K

The OSMC Vero 4K device is based on the Amlogic S905X (P212)
reference design with the following specifications:

- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100 Ethernet
- AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2)
- 2x USB 2.0 ports (1x OTG)
- IR receiver (internal)
- IR extender port (external)
- 1x micro SD card slot
- 1x Power LED (red)
- 1x Reset button (in AV jack)

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240622135117.2608890-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: meson: add GXLX/S905L/p271 support

Add a device-tree for the GXLX Amlogic P271 (S905L) reference design
board. This is a low-cost design similar to P281 (S905W) but with
silicon differen

arm64: dts: meson: add GXLX/S905L/p271 support

Add a device-tree for the GXLX Amlogic P271 (S905L) reference design
board. This is a low-cost design similar to P281 (S905W) but with
silicon differences to omit VP9 and use Mali 450-MP2 (not MP3). The
SoC is marked with S905L and "2" (believed to denote MP2) resulting
in chip distributor stock lists and Android STB marketing sometimes
describing it as an S905L2 chip.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604084134.3315841-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add support for A5 based Amlogic AV400

Amlogic A5 is an application processor designed for smart audio
and IoT applications.

Add basic support for the A5 based Amlogic AV400 board, whic

arm64: dts: add support for A5 based Amlogic AV400

Amlogic A5 is an application processor designed for smart audio
and IoT applications.

Add basic support for the A5 based Amlogic AV400 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240401-basic_dt-v3-5-cb29ae1c16da@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add support for A4 based Amlogic BA400

Amlogic A4 is an application processor designed for smart audio
and IoT applications.

Add basic support for the A4 based Amlogic BA400 board, whic

arm64: dts: add support for A4 based Amlogic BA400

Amlogic A4 is an application processor designed for smart audio
and IoT applications.

Add basic support for the A4 based Amlogic BA400 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240401-basic_dt-v3-4-cb29ae1c16da@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper

This adds a basic devicetree for the MNT Reform2 DIY laptop when using a
CM4 adapter and a BPI-CM4 module.

arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper

This adds a basic devicetree for the MNT Reform2 DIY laptop when using a
CM4 adapter and a BPI-CM4 module.

Co-developed-by: Lukas F. Hartmann <lukas@mntre.com>
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-7-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: meson: khadas-vim3l: add TS050 DSI panel overlay

This add dtbo overlay to support the Khadas TS050 panel on the
Khadas VIM3 & VIM3L boards.

Link: https://lore.kernel.org/r/20240403-amlogic-v

arm64: meson: khadas-vim3l: add TS050 DSI panel overlay

This add dtbo overlay to support the Khadas TS050 panel on the
Khadas VIM3 & VIM3L boards.

Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-6-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: add fbx8am DT overlays

Add support for two variants of the fbx8am board.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freeb

arm64: dts: amlogic: add fbx8am DT overlays

Add support for two variants of the fbx8am board.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Link: https://lore.kernel.org/r/79ba726d-d02c-44b9-b6f6-59b17ba9755c@freebox.fr
[narmstrong: squashed https://lore.kernel.org/all/814c9035-1fda-4cd3-ab3c-95b58e2ecb22@freebox.fr/]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: add libretech cottonwood support

Add support for the Libretech cottonwood board family.
These 2 boards are based on the same PCB, with an RPi B form factor.

The "Alta" board us

arm64: dts: amlogic: add libretech cottonwood support

Add support for the Libretech cottonwood board family.
These 2 boards are based on the same PCB, with an RPi B form factor.

The "Alta" board uses an a311d while the "Solitude" variant uses an s905d3.

Co-developed-by: Da Xue <da.xue@libretech.co>
Signed-off-by: Da Xue <da.xue@libretech.co>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231006103500.2015183-3-jbrunet@baylibre.com
[narmstrong: squashed blue/green led inversion fix]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: introduce Amlogic AD402 reference board based on A113L SoC

Supported IPs: CPU, GIC, IRQ, Timer, UART, Reserved memory for secos,
OPTEE client, fixed regulators, UART for HCI, SPI NAND, S

arm64: dts: introduce Amlogic AD402 reference board based on A113L SoC

Supported IPs: CPU, GIC, IRQ, Timer, UART, Reserved memory for secos,
OPTEE client, fixed regulators, UART for HCI, SPI NAND, SARADC, USB and
SDIO.

Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-15-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add board AN400

Add devicetrees support for Amlogic AN400 board based T7 SoC.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20230706091954.3301

arm64: dts: add board AN400

Add devicetrees support for Amlogic AN400 board based T7 SoC.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20230706091954.3301224-3-xianwei.zhao@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree

The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
family, on a board with the same form factor as the VIM3 m

arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree

The Khadas VIM4 uses the Amlogic A311D2 SoC, based on the Amlogic T7 SoC
family, on a board with the same form factor as the VIM3 models.

- 8GB LPDDR4X 2016MHz
- 32GB eMMC 5.1 storage
- 32MB SPI flash
- 10/100/1000 Base-T Ethernet
- AP6275S Wireless (802.11 a/b/g/n/ac/ax, BT5.1)
- HDMI 2.1 video
- HDMI Input
- 1x USB 2.0 + 1x USB 3.0 ports
- 1x USB-C (power) with USB 2.0 OTG
- 3x LED's (1x red, 1x blue, 1x white)
- 3x buttons (power, function, reset)
- M2 socket with PCIe, USB, ADC & I2C
- 40pin GPIO Header
- 1x micro SD card slot

Signed-off-by: Lucas Tanure <tanure@linux.com>
Link: https://lore.kernel.org/r/20230629073419.207886-5-tanure@linux.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: add support for C3 based Amlogic AW409

Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.

Add basic support for the C3 based Amlogic AW409 board, whi

arm64: dts: add support for C3 based Amlogic AW409

Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.

Add basic support for the C3 based Amlogic AW409 board, which describes
the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20230515093237.2203171-1-xianwei.zhao@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard

Add support for both the BananaPi BPI-CM4 module and the BananaPi
baseboard which is compatible with the Raspberr

arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard

Add support for both the BananaPi BPI-CM4 module and the BananaPi
baseboard which is compatible with the RaspberryPi CM4IO baseboard.

The BananaPi BPI-CM4 module follows the CM4 specifications at [1],
but with a single HDMI port and a single DSI output.

The current CM4IO baseboard DT should work fine on the Raspberry CM4
baseboard and other derivatives baseboards, but proper DT should
be written for other baseboards.

The split is done so it's easy to describe a new CM4 baseboard, enabling
only the necessary HW used on the baseboard.

[1] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf

Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230303-topic-amlogic-upstream-bpi-cm4-v2-2-2ecfde76fc4d@linaro.org
[narmstrong: fixed typos in commit message]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: meson: add support for BananaPi M2S variants

BananaPi M2S ships in Amlogic S922X and A311D variants with the
following common specifications:

- 16GB eMMC
- HDMI 2.1a video
- 2x 10/100/1

arm64: dts: meson: add support for BananaPi M2S variants

BananaPi M2S ships in Amlogic S922X and A311D variants with the
following common specifications:

- 16GB eMMC
- HDMI 2.1a video
- 2x 10/100/1000 Base-T Ethernet (1x RTL8211F, 1x RTL811H)
- 2x USB 2.0 ports
- 2x Status LED's (green/blue)
- 1x Power/Reset button
- 1x micro SD card slot
- 40-pin GPIO header
- PWM fan header
- UART header

The S992X variant has:
- 2GB LPDDR4 RAM

The A311D variant has:

- 4GB LPDDR4 RAM
- NPU (5.0 TOPS)
- MIPI DSI header
- MIPI CSI header

An optional RTL8822CS SDIO WiFi/BT mezzanine is available for
both board variants.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230305134512.1596572-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...

arm64: dts: meson: add support for Radxa Zero2

Radxa Zero2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:

- Amlogic A311D (Quad A73 + D

arm64: dts: meson: add support for Radxa Zero2

Radxa Zero2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:

- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 32/64/128GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output (micro)
- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header

Signed-off-by: Yuntian Zhang <yt@radxa.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230127150536.3719090-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

show more ...