Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:

- mt6572 is an

Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:

- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now

- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22

- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications

- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it

There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.

New board support is not that exciting, with a total of 33 newly added
machines here:

- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042

- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95

- Two newly added ASPEED BMC based motherboards, and one that got
removed

- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs

- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1

- A set-top box based on Amlogic meson-gxm

Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"

* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...

show more ...

Merge tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner device tree changes for 6.17

This branch includes a change shared with the clk tre

Merge tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner device tree changes for 6.17

This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.

The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.

Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards

New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.

* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...

Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: allwinner: t527: Add OrangePi 4A board

The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.

The board has the fo

arm64: dts: allwinner: t527: Add OrangePi 4A board

The OrangePi 4A is a typical Raspberry Pi model B sized development
board from Xunlong designed around an Allwinner T527 SoC.

The board has the following features:
- Allwinner T527 SoC
- AXP717B + AXP323 PMICs
- Up to 4GB LPDDR4 DRAM
- micro SD slot
- optional eMMC module
- M.2 slot for PCIe 2.0 x1
- 16 MB SPI-NOR flash
- 4x USB 2.0 type-A ports (one can be used in gadget mode)
- 1x Gigabit ethernet w/ Motorcomm PHY (through yet to be supported GMAC200)
- 3.5mm audio jack via internal audio codec
- HDMI 2.0 output
- eDP, MIPI CSI (2-lane and 4-lane) and MIPI DSI (4-lane) connectors
- USB type-C port purely for power
- AP6256 (Broadcom BCM4345) WiFi 5.0 + BT 5.0
- unsoldered headers for ADC and an additional USB 2.0 host port
- 40-pin GPIO header

Add a device tree for it, enabling all peripherals currently supported.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250628161608.3072968-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
v

Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:

- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.

- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.

- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family

- Amlogic S6/S7/S7D

- Samsung Exynos7870 is an older chip similar to Exynos7885

- WonderMedia wm8950 is a minor variation on the wm8850 chip

- Amlogic s805y is almost idential to s805x

- Allwinner A523 is similar to A527 and T527

- Qualcomm MSM8926 is a variant of MSM8226

- Qualcomm Snapdragon X1P42100 is related to R1E80100

There are also 65 boards, including reference designs for the chips
above, this includes

- 12 new boards based on TI K3 series chips, most of them from
Toradex

- 10 devices using Rockchips RK35xx and PX30 chips

- 2 phones and 2 laptops based on Qualcomm Snapdragon designs

- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses

- 3 Samsung Galaxy phones based on Exynos7870

- 5 Allwinner based boards using a variety of ARMv8 chips

- 9 32-bit machines, each based on a different SoC family

Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"

* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...

show more ...

Merge tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner device tree changes for 6.16

Introduce Allwinner A523 / A527 / T527 SoC family w/

Merge tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

Allwinner device tree changes for 6.16

Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices:
- Radxa Cubie A5E
- X96Q-Pro+
- Avaota-A1

Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1.
Note: the SoC has two different ethernet controllers.

Changes to existing SoCs:
- Enable GPU on H616 with all boards enabled
- Set maximum MMC frequency for the A100

Changes to existing boards:
- Add WiFi/BT header on PINE64 A64 boards
- Add hp-det-gpios for Anbernic RG35XX
- Add support for PHY LEDs on Bananapi (the original one)

Add new devices for existing SoCs:
- YuzukiHD Chameleon based on H6
- Liontron H-A133L based on A133 (compatible with A100)

Tree wide cleanups:
- Use preferred node names for cooling maps
- Align wifi node name with bindings
- Drop spurious 'clock-latency-ns' properties for H5 & H6

* tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a100: add Liontron H-A133L board support
dt-bindings: arm: sunxi: Add Liontron H-A133L board name
dt-bindings: vendor-prefixes: Add Liontron name
ARM: dts: bananapi: add support for PHY LEDs
arm64: dts: allwinner: a100: set maximum MMC frequency
arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board
arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board
arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC
dt-bindings: sram: sunxi-sram: Add A523 compatible
arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard
arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64
arm64: dts: allwinner: correct the model name for Radxa Cubie A5E
ARM: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: h616: enable Mali GPU for all boards
arm64: dts: allwinner: h616: Add Mali GPU node
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
arm/arm64: dts: allwinner: Use preferred node names for cooling maps
arm64: dts: allwinner: h616: add YuzukiHD Chameleon support
...

Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

arm64: dts: allwinner: a100: add Liontron H-A133L board support

The H-A133L board is an industrial development board made by Liontron.
It contains a number of dedicated JST connectors, to connect ex

arm64: dts: allwinner: a100: add Liontron H-A133L board support

The H-A133L board is an industrial development board made by Liontron.
It contains a number of dedicated JST connectors, to connect external
peripherals. It features:

- Allwinner A133 SoC (4 * Arm Cortex-A53 cores at up to 1.6 GHz)
- 1 GiB, 2 GiB or 4 GiB of LPDDR4 DRAM
- between 16 and 128 GiB eMMC flash
- AXP707 PMIC (compatible to AXP803)
- 100 Mbit/s RJ45 Ethernet socket, using an JLSemi JL1101 PHY
- XR829 WIFI+Bluetooth chip
- 2 * USB 2.0 USB-A ports, plus three sets of USB pins on connectors
(connected via a USB hub connected to USB1 on the SoC)
- microSD card slot
- 3.5mm A/V port
- 12V power supply
- connectors for an LVDS or MIPI-DSI panel

Add the devicetree describing the board's peripherals and their
connections.

Despite being a devboard, the manufacturer does not publish a schematic
(I asked), so the PMIC rail assignments were bases on BSP dumps,
educated guesses and some experimentation. Dropping the always-on
property from any of the rails carrying it will make the board hang as
soon as the kernel turns off unused regulators.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505164729.18175-4-andre.przywara@arm.com
[wens@csie.org: fix property in &usbphy; fix comment typo in &usb_otg]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: h616: add YuzukiHD Chameleon support

The Chameleon board is an OpenHardware devboard made by YuzukiTsuru.
The form factor resembles the Raspberry Pi Model A boards, though it

arm64: dts: allwinner: h616: add YuzukiHD Chameleon support

The Chameleon board is an OpenHardware devboard made by YuzukiTsuru.
The form factor resembles the Raspberry Pi Model A boards, though it
differs significantly in its features:

- Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache, 1.4 GHz)
- between 512MiB and 2GiB DDR3 DRAM
- up to 128 GiB eMMC flash
- AXP313a PMIC
- 100 Mbit/s Ethernet pins on a header
- XR829 WIFI+Bluetooth chip
- 4 * USB 2.0 USB-C ports
- microSD card slot
- 3.5mm A/V port

Add the devicetree describing the board's peripherals and their
connections.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-16-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a523: add Radxa A5E support

The Radxa A5E is a development board using the Allwinner A527 SoC, which
is using the same die as the A523 SoC, just exposing the pins of more
peri

arm64: dts: allwinner: a523: add Radxa A5E support

The Radxa A5E is a development board using the Allwinner A527 SoC, which
is using the same die as the A523 SoC, just exposing the pins of more
peripherals (like HDMI or the 2nd MAC). The board features:

- Allwinner A527/T527 SoC: 8 ARM Cortex-A55 cores, Mali-G57 MC1 GPU
- 1GiB/2GiB/4GiB LPDDR4 DRAM
- AXP717 + AXP323 PMICs
- Raspberry-Pi-2 compatible 40pin GPIO header
- 1 USB 2.0 type C port (OTG), also power supply
- 1 USB 3.0 type A host port (multiplexed with M.2 slot)
- 1 M.2 M-key 2230 slot, with 1 PCIe2.1 lane connected (multiplexed
with USB 3.0 port)
- MicroSD slot
- optional eMMC, 8, 16 or 32GB available
- optional on-board 16MiB bootable SPI NOR flash
- two 1Gbps Ethernet ports (via MAXIO MAE0621A PHYs)
- PoE header for optional supply circuit on one Ethernet port
- WiFi 802.11 a/b/g/n/ac/ax (LB-Link BL-M8800DS2 module using AIC8800)
- HDMI port
- camera and LCD connectors
- power supply via USB-C connector (but no PD) or GPIO header pins

This .dts describes the devices as far as we support them at the moment.
The PMIC rails have been assigned as per the schematics.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-14-andre.przywara@arm.com
[wens@csie.org: Squash in SD card detect pull resistor fix]
Link: https://patch.msgid.link/20250425003422.3465-1-andre.przywara@arm.com
[wens@csie.org: Rename dts file to sun55i-a527-cubie-a5e.dts]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a523: add X96Q-Pro+ support

The X96QPro+ is a TV box using the Allwinner H728 SoC. That SoC seems to
be a package variant of the A523 family, at least it uses the same SoC
ID

arm64: dts: allwinner: a523: add X96Q-Pro+ support

The X96QPro+ is a TV box using the Allwinner H728 SoC. That SoC seems to
be a package variant of the A523 family, at least it uses the same SoC
ID and is compatible as far as we can assess.

It comes with the following specs:
- Allwinner H728 SoC: 8 Arm Cortex-A55 cores, Mali-G57 MC1 GPU
- 2 or 4GiB DDR3L DRAM
- 32, 64, or 128 GiB eMMC flash
- AXP717 + AXP323 PMICs
- Gigabit Ethernet (using MAXIO PHY)
- HDMI port
- 2 * USB 2.0 ports
- 1 * USB 3.0 port
- microSD card slot
- TOSLINK digital audio output
- 3.5mm A/V port
- infrared sensor
- 7-segment display
- 5V barrel plug power supply
- power button

The PCB provides holes for soldering a UART header or cable, this is
connected to the debug UART0. There is another set of UART pins
available. The board also features a FEL button (accessible through the
3.5mm socket) and a reset button (only accessible when case is open).

This .dts just describes the basic peripherals as far as we support them
at the moment. The PMIC rail assignments are reverse engineered as far
as possible, by dumping them from a running Android system, and correlating
them to other boards using the same SoC.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-13-andre.przywara@arm.com
[wens@csie.org: Squash in SD card detect pull resistor fix]
Link: https://patch.msgid.link/20250425003422.3465-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

arm64: dts: allwinner: a523: add Avaota-A1 router support

The Avaota A1 router board is an Open Source hardware board, designed
by YuzukiHD. Pine64 produces some boards and sells them. It uses the
A

arm64: dts: allwinner: a523: add Avaota-A1 router support

The Avaota A1 router board is an Open Source hardware board, designed
by YuzukiHD. Pine64 produces some boards and sells them. It uses the
Allwinner A527 or T527 SoC, and comes with the following features:
- Eight ARM Cortex-A55 cores, Mali-G57 MC1 GPU
- 1GiB/2GiB/4GiB LPDDR4 DRAM
- AXP717 + AXP323 PMIC
- Raspberry-Pi-2 compatible GPIO header
- 1 USB 2.0 type A host port, 1 USB 3.0 type A host post
- 1 USB 2.0 type C port (OTG + serial debug)
- MicroSD slot
- eMMC between 16 and 128 GiB
- on-board 16MiB bootable SPI NOR flash
- two 1Gbps Ethernet ports (via RTL8211F PHYs)
- HDMI port
- DP port
- camera and LCD connectors
- 3.5mm headphone jack
- (yet) unsupported WiFi/BT chip
- 1.3" LC display, connected via SPI
- 12 V barrel plug for power supply

Add the devicetree file describing the currently supported features.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-12-andre.przywara@arm.com
[wens@csie.org: Squash in SD card detect pull resistor fix]
Link: https://patch.msgid.link/20250425003422.3465-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>