Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their

Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:

- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series

These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:

- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62

Other notable bits are:

- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"

* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...

show more ...

Merge tag 'stm32-dt-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v7.1, round 1

Highlights:
----------

- MPU:
- STM32MP13:
- Introduce an

Merge tag 'stm32-dt-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v7.1, round 1

Highlights:
----------

- MPU:
- STM32MP13:
- Introduce and enable debug bus on DK board.
- Enable Coresight on DK board.
- Add DT overlays for DH board.
- Add Wakeup capabilities on I2C nodes.

- STMP32MP15:
- ST:
- Enable DCMI DMA chaining to improve performances.
- Introduce and enable debug bus on EV and DK board.
- Enable Coresight on EV and DK board.

- DH:
- Add DT overlays for DH board.

- Phytec:
- Rename "Phycore" to "phyboard-sargas" DT files and introduce
SOM device tree file.
- Fix and enhance current support.

- STM32MP21:
- Add Bsec support.

- STM32MP23:
- Add LTDC and LVDS support and enable display on STM32MP235F-DK
board.

- STM32MP25:
- Enable display on STM32MP235F-DK board.

* tag 'stm32-dt-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (42 commits)
arm64: defconfig: Enable STMicroelectronics STM32 display support
arm64: dts: st: enable display support on stm32mp257f-dk board
arm64: dts: st: describe power supplies for stm32mp257f-dk board
arm64: dts: st: enable display support on stm32mp235f-dk board
arm64: dts: st: describe power supplies for stm32mp235f-dk board
arm64: dts: st: add clock-cells to syscfg node on stm32mp231
arm64: dts: st: add lvds support on stm32mp235
arm64: dts: st: add ltdc support on stm32mp235
arm64: dts: st: add ltdc support on stm32mp231
arm64: dts: st: omit unused pinctrl groups from stm32mp25 dtb files
arm64: dts: st: add bootph-all in bsec node to stm32mp215f-dk
arm64: dts: st: add bsec support to stm32mp21
ARM: dts: stm32: fix misalignments in nodes of stm32mp131
ARM: dts: stm32: fix misalignments in nodes of stm32mp151
arm64: dts: st: describe i2c2 / i2c8 on stm32mp235f-dk
arm64: dts: st: describe i2c2 / i2c8 on stm32mp257f-dk
arm64: dts: st: disable DMA usage for i2c on stm32mp257f-ev1
arm64: dts: st: add i2c2 pinmux nodes in stm32mp25-pinctrl.dtsi
arm64: dts: st: update i2c nodes interrupt/wakeup-source in stm32mp231
arm64: dts: st: update i2c nodes interrupt/wakeup-source in stm32mp251
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: stm32: fix misalignments in nodes of stm32mp151

Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.

Signed-off-by: Amel

ARM: dts: stm32: fix misalignments in nodes of stm32mp151

Since the ETZPC system bus was introduced, misalignments have appeared
in some nodes moved under the etzpc parent node.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20260304-mp1x_alignment_issues-v1-1-19a8013782a5@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: stm32: update i2c nodes interrupt/dma in stm32mp151

Update all i2c nodes with the following properties:
- replace interrupts with interrupts-extended and rely on exti
- add dma propert

ARM: dts: stm32: update i2c nodes interrupt/dma in stm32mp151

Update all i2c nodes with the following properties:
- replace interrupts with interrupts-extended and rely on exti
- add dma properties

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260224-stm32-i2c-dt-updates-v1-1-347cf6fca7d1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

arm: dts: stm32: introduce the debug bus for stm32mp1x platforms

Some peripherals cannot be probed if a debug configuration is not set
in the BSEC.
Introduce a debug bus that will check the debug su

arm: dts: stm32: introduce the debug bus for stm32mp1x platforms

Some peripherals cannot be probed if a debug configuration is not set
in the BSEC.
Introduce a debug bus that will check the debug subsystem accessibility
before probing these peripheral drivers.

Add Coresight peripheral nodes under this bus and add the appropriate
access-controllers property to the HDP node.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-7-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: stm32: add sram node within stm32mp151.dtsi

Introduce the sram node in order to be used by drivers
requiring SRAM memory space.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link

ARM: dts: stm32: add sram node within stm32mp151.dtsi

Introduce the sram node in order to be used by drivers
requiring SRAM memory space.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20260106-stm32-dcmi-dma-chaining-v2-11-70688bccd80a@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all

Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:

- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.

- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.

- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.

- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.

- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores

In total, there are 65 new machines, including:

- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.

- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC

- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.

- Several Samsung phones using Qualcomm Snapdragon chips

- Set-top boxes based on Allwinner H313

- Five BMC boards using 32-bit ASpeed SoCs

- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs

Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.

Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"

* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...

show more ...

Merge tag 'stm32-dt-for-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.18, round 1

Highlights:
----------

- MPU:
- STM32MP13:
- Add missi

Merge tag 'stm32-dt-for-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.18, round 1

Highlights:
----------

- MPU:
- STM32MP13:
- Add missing Ethernet1/2 PTP reference clocks.
- Add Hardware debug port (HDP).

- STMP32MP15:
- Add resets property to m_can nodes.
- Add Hardware debug port (HDP) and enable it on stm32mp157c-dk2
board.
- Reserve leds for CM4 on stm32mp15xx-ed1 and stm32mp15xx-dkx.
- stm32mp151c-plyaqm:
Use correct dai-format property.

- STM32MP23:
- Add Ethernet1 MAC controller on stm32mp235f-dk board:
It is connected to a RTL8211F-CG phy through RGMII.
- Fix GPIO bank definition & memory size (DDR).

- STM32MP25:
- Add Ethernet1 MAC controller on stm32mp257f-dk board.
It is connected to a RTL8211F-CG phy through RGMII.
- Add Ethernet1 MAC controller on stm32mp257f-ev1 board.
It is connected to a RTL8211F-CG phy through RGMII.
- Add display support by enabling the following IPs on
stm32mp257f-ev1:
* LTDC
* LVDS
* WSVGA LVDS panel (1024x600)
* Panel LVDS backlight as GPIO backlight
* ILI2511 i2c touchscreen
- Add PCIe Root complex and Endpoint support on stm32mp257f-ev1.
Root complex mode is used by default.

* tag 'stm32-dt-for-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (30 commits)
arm64: dts: st: fix memory region size on stm32mp235f-dk
arm64: dts: st: remove gpioj and gpiok banks from stm32mp231
arm64: dts: st: enable ethernet1 controller on stm32mp235f-dk
arm64: dts: st: enable ethernet1 controller on stm32mp257f-ev1
arm64: dts: st: enable ethernet1 controller on stm32mp257f-dk
arm64: dts: st: add eth1 pins for stm32mp2x platforms
ARM: dts: stm32: add missing PTP reference clocks on stm32mp13x SoCs
arm64: dts: st: enable display support on stm32mp257f-ev1 board
arm64: dts: st: add clock-cells to syscfg node on stm32mp251
arm64: dts: st: add lvds support on stm32mp255
arm64: dts: st: add ltdc support on stm32mp255
arm64: dts: st: add ltdc support on stm32mp251
ARM: dts: stm32: add resets property to m_can nodes in the stm32mp153
dt-binding: can: m_can: add optional resets property
arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board
arm64: dts: st: Add PCIe Endpoint mode on stm32mp251
arm64: dts: st: Add PCIe Root Complex mode on stm32mp251
arm64: dts: st: add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: defconfig: Enable STMicroelectronics STM32 DMA3 support
ARM: dts: stm32: add Hardware debug port (HDP) on stm32mp157c-dk2 board
...

Link: https://lore.kernel.org/r/13153fc2-1abe-4d53-807a-5d289981a63d@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: stm32: add Hardware debug port (HDP) on stm32mp15

Add the hdp devicetree node for stm32mp15 SoC family

Keep the node disabled as HDP needs the pinctrl SoC configuration to be
able to outp

ARM: dts: stm32: add Hardware debug port (HDP) on stm32mp15

Add the hdp devicetree node for stm32mp15 SoC family

Keep the node disabled as HDP needs the pinctrl SoC configuration to be
able to output its mux output signal outside of the SoC, on the SoC pad.
This configuration is provided in the board dtsi file through 'pinctrl-*'
properties as well as HDP mux configuration.
Thus, if needed, HDP should be enabled in board dtsi file.

Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250711-hdp-upstream-v7-5-faeecf7aaee1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...