Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detecte

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.

Example use cases are "wake from suspend on approach" or to "lock
when leaving".

This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.

Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.

show more ...

Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx

Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.

The new SoCs in this branch are:

- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.

- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9

- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC

- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores

- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.

- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.

- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.

- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016

- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip

All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.

There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.

The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.

A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"

* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...

show more ...

Merge tag 'imx-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree change for 6.14:

- Clean up TQMa7x device trees (Alexander Stein)
- Correc

Merge tag 'imx-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX ARM device tree change for 6.14:

- Clean up TQMa7x device trees (Alexander Stein)
- Correct node name pattern for mdio-gpio devices (Fabio Estevam)
- Update deprecated GPIO properties for Generic ASoC Sound Card device
(Geert Uytterhoeven)
- Set USB dr_mode property to OTG explicitly for imx6qdl-sabresd based
boards (Hui Wang)
- Update MAINTAINERS entry for DH electronics DHSOM boards (Marek Vasut)
- A series from Stefan Kerkmann to add phy-3p0-supply for usb phys

* tag 'imx-dt-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Use the correct mdio pattern
ARM: dts: imx6qdl-sabresd: add dr_mode to usbotg
ARM: dts: imx6qdl-apalis: Change to "adi,force-bt656-4"
ARM: dts: imx6sx: add phy-3p0-supply to usb phys
ARM: dts: imx6sl: add phy-3p0-supply to usb phys
ARM: dts: imx6qdl: add phy-3p0-supply to usb phys
MAINTAINERS: Update entry for DH electronics DHSOM SoMs and boards
ARM: dts: imx7[d]-mba7: add Ethernet PHY IRQ support
ARM: dts: imx7-mba7: Remove duplicated power supply
ARM: dts: imx7-mba7: Fix SD card vmmc-supply
ARM: dts: imx7-mba7: Add 3.3V and 5.0V regulators
ARM: dts: imx7-tqma7: add missing vs-supply for LM75A (rev. 01xxx)
ARM: dts: imx7-tqma7: Remove superfluous status="okay" property
ARM: dts: imx7-mba7: remove LVDS transmitter regulator
ARM: dts: imx: Switch to {hp,mic}-det-gpios

Link: https://lore.kernel.org/r/20250105095139.714590-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: imx6qdl: add phy-3p0-supply to usb phys

The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected an

ARM: dts: imx6qdl: add phy-3p0-supply to usb phys

The integrated usb phys are supplied by the 3p0 regulator, which has a
voltage range of 2.625V to 3.4V. Thus the min and max values are
corrected and the regulator added as a proper supply for the usb phys.

This fixes the following warnings during the probe of the mxs_phy
driver:

mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator
mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator

The 3p0 regulator handling was introduced by commit 966d73152078 ("usb:
phy: mxs: enable regulator phy-3p0 to improve signal qualilty")`.

Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>