Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'tracepoints-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull unused tracepoints update from Steven Rostedt:
"Detect unused tracepoints.

If a tracepoint i

Merge tag 'tracepoints-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull unused tracepoints update from Steven Rostedt:
"Detect unused tracepoints.

If a tracepoint is defined but never used (TRACE_EVENT() created but
no trace_<tracepoint>() called), it can take up to or more than 5K of
memory each. This can add up as there are around a hundred unused
tracepoints with various configs. That is 500K of wasted memory.

Add a make build parameter of "UT=1" to have the build warn if an
unused tracepoint is detected in the build. This allows detection of
unused tracepoints to be upstream so that outreachy and the mentoring
project can have new developers look for fixing them, without having
these warnings suddenly show up when someone upgrades their kernel.

When all known unused tracepoints are removed, then the "UT=1" build
parameter can be removed and unused tracepoints will always warn. This
will catch new unused tracepoints after the current ones have been
removed.

Summary:

- Separate out elf functions from sorttable.c

Move out the ELF parsing functions from sorttable.c so that the
tracing tooling can use it.

- Add a tracepoint verifier tool to the build process

If "UT=1" is added to the kernel command line, any unused
tracepoints will trigger a warning at build time.

- Do not warn about unused tracepoints for tracepoints that are
exported

There are sever cases where a tracepoint is created by the kernel
and used by modules. Since there's no easy way to detect if these
are truly unused since the users are in modules, if a tracepoint is
exported, assume it will eventually be used by a module. Note,
there's not many exported tracepoints so this should not be a
problem to ignore them.

- Have building of modules also detect unused tracepoints

Do not only check the main vmlinux for unused tracepoints, also
check modules. If a module is defining a tracepoint it should be
using it.

- Add the tracepoint-update program to the ignore file

The new tracepoint-update program needs to be ignored by git"

* tag 'tracepoints-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts: add tracepoint-update to the list of ignores files
tracing: Add warnings for unused tracepoints for modules
tracing: Allow tracepoint-update.c to work with modules
tracepoint: Do not warn for unused event that is exported
tracing: Add a tracepoint verification check at build time
sorttable: Move ELF parsing into scripts/elf-parse.[ch]

show more ...

scripts: add tracepoint-update to the list of ignores files

The new program for removing unused tracepoints is not ignored as it
should. Add it to the local .gitignore.

Cc: Vladimir Oltean <vladimi

scripts: add tracepoint-update to the list of ignores files

The new program for removing unused tracepoints is not ignored as it
should. Add it to the local .gitignore.

Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/20251029120709.24669-1-brgl@bgdev.pl
Fixes: e30f8e61e251 ("tracing: Add a tracepoint verification check at build time")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.

Core:

- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.

- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.

- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.

- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.

Netfilter:

- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.

- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.

- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.

Protocols:

- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core

- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.

- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.

- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.

- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.

- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).

- Support ipv4-mapped ipv6 address clients in smc-r v2.

- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.

- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.

Driver API:

- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.

- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.

- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.

- Consolidate DSA drivers Energy Efficiency Ethernet support.

- Add EEE management to phylink, making use of the phylib
implementation.

- Add phylib support for in-band capabilities negotiation.

- Simplify how phylib-enabled mac drivers expose the supported
interfaces.

Tests and tooling:

- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.

- Increase TCP selftest coverage importing several packetdrill
test-cases.

- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.

- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering

- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit

- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support

- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation

- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration

- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274

- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"

* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...

show more ...

Merge branch 'lib-packing-introduce-and-use-un-pack_fields'

Jacob Keller says:

====================
lib: packing: introduce and use (un)pack_fields

This series improves the packing library with a

Merge branch 'lib-packing-introduce-and-use-un-pack_fields'

Jacob Keller says:

====================
lib: packing: introduce and use (un)pack_fields

This series improves the packing library with a new API for packing or
unpacking a large number of fields at once with minimal code footprint. The
API is then used to replace bespoke packing logic in the ice driver,
preparing it to handle unpacking in the future. Finally, the ice driver has
a few other cleanups related to the packing logic.

The pack_fields and unpack_fields functions have the following improvements
over the existing pack() and unpack() API:

1. Packing or unpacking a large number of fields takes significantly less
code. This significantly reduces the .text size for an increase in the
.data size which is much smaller.

2. The unpacked data can be stored in sizes smaller than u64 variables.
This reduces the storage requirement both for runtime data structures,
and for the rodata defining the fields. This scales with the number of
fields used.

3. Most of the error checking is done at compile time, rather than
runtime, via CHECK_PACKED_FIELD macros.

The actual packing and unpacking code still uses the u64 size
variables. However, these are converted to the appropriate field sizes when
storing or reading the data from the buffer.

This version now uses significantly improved macro checks, thanks to the
work of Vladimir. We now only need 300 lines of macro for the generated
checks. In addition, each new check only requires 4 lines of code for its
macro implementation and 1 extra line in the CHECK_PACKED_FIELDS macro.
This is significantly better than previous versions which required ~2700
lines.

The CHECK_PACKED_FIELDS macro uses __builtin_choose_expr to select the
appropriately sized CHECK_PACKED_FIELDS_N macro. This enables directly
adding CHECK_PACKED_FIELDS calls into the pack_fields and unpack_fields
macros. Drivers no longer need to call the CHECK_PACKED_FIELDS_N macros
directly, and we do not need to modify Kbuild or introduce multiple CONFIG
options.

The code for the CHECK_PACKED_FIELDS_(0..50) and CHECK_PACKED_FIELDS itself
can be generated from the C program in scripts/gen_packed_field_checks.c.
This little C program may be used in the future to update the checks to
more sizes if a driver with more than 50 fields appears in the future.
The total amount of required code is now much smaller, and we don't
anticipate needing to increase the size very often. Thus, it makes sense to
simply commit the result directly instead of attempting to modify Kbuild to
automatically generate it.

This version uses the 5-argument format of pack_fields and unpack_fields,
with the size of the packed buffer passed as one of the arguments. We do
enforce that the compiler can tell its a constant using
__builtin_constant_p(), ensuring that the size checks are handled at
compile time. We could reduce these to 4 arguments and require that the
passed in pbuf be of a type which has the appropriate size. I opted against
that because it makes the API less flexible and a bit less natural to use
in existing code.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

v9: https://lore.kernel.org/20241204-packing-pack-fields-and-ice-implementation-v9-0-81c8f2bd7323@intel.com
v8: https://lore.kernel.org/20241203-packing-pack-fields-and-ice-implementation-v8-0-2ed68edfe583@intel.com
v7: https://lore.kernel.org/20241202-packing-pack-fields-and-ice-implementation-v7-0-ed22e38e6c65@intel.com
v6: https://lore.kernel.org/20241118-packing-pack-fields-and-ice-implementation-v6-0-6af8b658a6c3@intel.com
v5: https://lore.kernel.org/20241111-packing-pack-fields-and-ice-implementation-v5-0-80c07349e6b7@intel.com
v4: https://lore.kernel.org/20241108-packing-pack-fields-and-ice-implementation-v4-0-81a9f42c30e5@intel.com
v3: https://lore.kernel.org/20241107-packing-pack-fields-and-ice-implementation-v3-0-27c566ac2436@intel.com
v2: https://lore.kernel.org/20241025-packing-pack-fields-and-ice-implementation-v2-0-734776c88e40@intel.com
v1: https://lore.kernel.org/20241011-packing-pack-fields-and-ice-implementation-v1-0-d9b1f7500740@intel.com
====================

Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-0-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

lib: packing: add pack_fields() and unpack_fields()

This is new API which caters to the following requirements:

- Pack or unpack a large number of fields to/from a buffer with a small
code footpr

lib: packing: add pack_fields() and unpack_fields()

This is new API which caters to the following requirements:

- Pack or unpack a large number of fields to/from a buffer with a small
code footprint. The current alternative is to open-code a large number
of calls to pack() and unpack(), or to use packing() to reduce that
number to half. But packing() is not const-correct.

- Use unpacked numbers stored in variables smaller than u64. This
reduces the rodata footprint of the stored field arrays.

- Perform error checking at compile time, rather than runtime, and return
void from the API functions. Because the C preprocessor can't generate
variable length code (loops), this is a bit tricky to do with macros.

To handle this, implement macros which sanity check the packed field
definitions based on their size. Finally, a single macro with a chain of
__builtin_choose_expr() is used to select the appropriate macros. We
enforce the use of ascending or descending order to avoid O(N^2) scaling
when checking for overlap. Note that the macros are written with care to
ensure that the compilers can correctly evaluate the resulting code at
compile time. In particular, care was taken with avoiding too many nested
statement expressions. Nested statement expressions trip up some
compilers, especially when passing down variables created in previous
statement expressions.

There are two key design choices intended to keep the overall macro code
size small. First, the definition of each CHECK_PACKED_FIELDS_N macro is
implemented recursively, by calling the N-1 macro. This avoids needing
the code to repeat multiple times.

Second, the CHECK_PACKED_FIELD macro enforces that the fields in the
array are sorted in order. This allows checking for overlap only with
neighboring fields, rather than the general overlap case where each field
would need to be checked against other fields.

The overlap checks use the first two fields to determine the order of the
remaining fields, thus allowing either ascending or descending order.
This enables drivers the flexibility to keep the fields ordered in which
ever order most naturally fits their hardware design and its associated
documentation.

The CHECK_PACKED_FIELDS macro is directly called from within pack_fields
and unpack_fields, ensuring that all drivers using the API receive the
benefits of the compile-time checks. Users do not need to directly call
any of the macros directly.

The CHECK_PACKED_FIELDS and its helper macros CHECK_PACKED_FIELDS_(0..50)
are generated using a simple C program in scripts/gen_packed_field_checks.c
This program can be compiled on demand and executed to generate the
macro code in include/linux/packing.h. This will aid in the event that a
driver needs more than 50 fields. The generator can be updated with a new
size, and used to update the packing.h header file. In practice, the ice
driver will need to support 27 fields, and the sja1105 driver will need
to support 0 fields. This on-demand generation avoids the need to modify
Kbuild. We do not anticipate the maximum number of fields to grow very
often.

- Reduced rodata footprint for the storage of the packed field arrays.
To that end, we have struct packed_field_u8 and packed_field_u16, which
define the fields with the associated type. More can be added as
needed (unlikely for now). On these types, the same generic pack_fields()
and unpack_fields() API can be used, thanks to the new C11 _Generic()
selection feature, which can call pack_fields_u8() or pack_fields_16(),
depending on the type of the "fields" array - a simplistic form of
polymorphism. It is evaluated at compile time which function will actually
be called.

Over time, packing() is expected to be completely replaced either with
pack() or with pack_fields().

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241210-packing-pack-fields-and-ice-implementation-v10-3-ee56a47479ac@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge wireless into wireless-next

Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless t

Merge wireless into wireless-next

Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>

show more ...

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>