Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.

Current release

Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.

Current release - regressions:

- nvme-tcp: fix comma-related oops after sendpage changes

Current release - new code bugs:

- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported

Previous releases - regressions:

- sctp: fix potential deadlock on &net->sctp.addr_wq_lock

- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()

Previous releases - always broken:

- net: fix net_dev_start_xmit trace event vs skb_transport_offset()

- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable

- wireguard: queuing: use saner cpu selection wrapping

- sched: act_ipt: various bug fixes for iptables <> TC interactions

- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX

- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging

- eth: sfc: fix null-deref in devlink port without MAE access

- eth: ibmvnic: do not reset dql stats on NON_FATAL err

Misc:

- xsk: honor SO_BINDTODEVICE on bind"

* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...

show more ...

samples: pktgen: fix append mode failed issue

Each sample script sources functions.sh before parameters.sh
which makes $APPEND undefined when trapping EXIT no matter in
append mode or not. Due to th

samples: pktgen: fix append mode failed issue

Each sample script sources functions.sh before parameters.sh
which makes $APPEND undefined when trapping EXIT no matter in
append mode or not. Due to this when sample scripts finished
they always do "pgctrl reset" which resets pktgen config.

So move trap to each script after sourcing parameters.sh
and trap EXIT explicitly.

Signed-off-by: J.J. Martzki <mars14850@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be rem

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Enable memcg accounting for various networking o

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Enable memcg accounting for various networking objects.

BPF:

- Introduce bpf timers.

- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.

- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.

- Add support for UNIX sockets for BPF sockmap.

- Extend BPF iterator support for UNIX domain sockets.

- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.

Protocols:

- Support IOAM Pre-allocated Trace with IPv6.

- Support Management Component Transport Protocol.

- bridge: multicast: add vlan support.

- netfilter: add hooks for the SRv6 lightweight tunnel driver.

- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP

- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing

- af_unix: add OOB notification support.

- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.

- mac80211: Target Wake Time support in AP mode.

- can: j1939: extend UAPI to notify about RX status.

Driver APIs:

- Add page frag support in page pool API.

- Many improvements to the DSA (distributed switch) APIs.

- ethtool: extend IRQ coalesce uAPI with timer reset modes.

- devlink: control which auxiliary devices are created.

- Support CAN PHYs via the generic PHY subsystem.

- Proper cross-chip support for tag_8021q.

- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.

Drivers:

- veth: more flexible channels number configuration.

- openvswitch: introduce per-cpu upcall dispatch.

- Add internet mix (IMIX) mode to pktgen.

- Transparently handle XDP operations in the bonding driver.

- Add LiteETH network driver.

- Renesas (ravb):
- support Gigabit Ethernet IP

- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge

- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation

- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings

- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels

- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state

- Netronome Ethernet (nfp):
- add conntrack offload support

- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device

- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)

- Xen pv driver:
- harden netfront against malicious backends

- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces

Refactor:

- Ambient BPF run context and cgroup storage cleanup.

- Compat rework for ndo_ioctl.

Old code removal:

- prism54 remove the obsoleted driver, deprecated by the p54 driver.

- wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...

show more ...

Merge branch 'for-5.15-printk-index' into for-linus

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'pktgen-samples-next'

Juhee Kang says:

====================
samples: pktgen: enhance the ability to print the execution results of samples

This patch series improves the ability to pr

Merge branch 'pktgen-samples-next'

Juhee Kang says:

====================
samples: pktgen: enhance the ability to print the execution results of samples

This patch series improves the ability to print the execution result of pktgen
samples by adding a line which calls the function before termination and adding
trap SIGINT. Also, this series documents the latest pktgen usage options.

Currently, pktgen samples print the execution result when terminated usually.
However, sample03 is not working properly.

This is results of sample04 and sample03:

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
Running... ctrl^C to stop
Device: eth0@0
Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
51762pps 24Mb/sec (24845760bps) errors: 0

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
Running... ctrl^C to stop

Because sample03 doesn't call the function which prints the execution result
when terminated normally, unlike other samples. So the first commit solves
this issue by adding a line which calls the function before termination.

Also, all pktgen samples are able to send infinite messages per thread by
setting the count option to 0, and pktgen is stopped by Ctrl-C. However,
the sample besides sample{3...5} don't work appropriately because Ctrl-C stops
the script, not just pktgen.

This is results of samples:

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 0
Running... ctrl^C to stop
^CDevice: eth0@0
Result: OK: 569657(c569538+d118) usec, 84650 (60byte,0frags)
148597pps 71Mb/sec (71326560bps) errors: 0

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample01_simple.sh -n 0
Running... ctrl^C to stop
^C

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample02_multiqueue.sh -n 0
Running... ctrl^C to stop
^C

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -n 0
Running... ctrl^C to stop
^C

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_bench_xmit_mode_netif_receive.sh -n 0
Running... ctrl^C to stop
^C

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_bench_xmit_mode_queue_xmit.sh -n 0
Running... ctrl^C to stop
^C

So the second commit solves this issue by adding trap SIGINT. Also, changes
control_c function to print_results to maintain consistency with other samples
on the first commit and second commit.

And current pktgen.rst documentation doesn't add the latest pktgen sample
usage options such as count and IPv6, and so on. Also, the old pktgen
sample scripts are still included in the document. The old scripts were removed
by the commit a4b6ade8359f ("samples/pktgen: remove remaining old pktgen
sample scripts").

Thus, the last commit documents the latest pktgen sample usage and removes
old sample scripts. And fixes a minor typo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

samples: pktgen: fix to print when terminated normally

Currently, most pktgen samples print the execution result when the
program is terminated normally. However, sample03 doesn't work
appropriately

samples: pktgen: fix to print when terminated normally

Currently, most pktgen samples print the execution result when the
program is terminated normally. However, sample03 doesn't work
appropriately.

This is results of samples:

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1
Running... ctrl^C to stop
Device: eth0@0
Result: OK: 19(c5+d13) usec, 1 (60byte,0frags)
51762pps 24Mb/sec (24845760bps) errors: 0

# DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1
Running... ctrl^C to stop

The reason why it doesn't print the execution result when the program is
terminated usually is that sample03 doesn't call the function which
prints the result, unlike other samples.

So, this commit solves this issue by calling the function before
termination. Also, this commit changes control_c function to
print_result to maintain consistency with other samples.

Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>