wifi: mac80211: move frame RX handling to type files

The interface frame queue processing code currently
differentiates many frame types and below those the
interface types, but then falls through t

wifi: mac80211: move frame RX handling to type files

The interface frame queue processing code currently
differentiates many frame types and below those the
interface types, but then falls through to per-type
processing. Move this code to the per-type functions,
creating a new ap.c file that gets relevant code, and
this way reduce the number of non-static symbols.

This also helps with adding more cases for UHR later.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103649.c00059e68a07.I2269130278390f534d6051fac424402a854a54aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211

Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that

wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211

Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that the ipw2x00
drivers, which depend on cfg80211 but not mac80211, can also call it.

Currently these drivers have their own local implementations of
michael_mic() based on crypto_shash, which is redundant and inefficient.
By consolidating all the Michael MIC code into cfg80211, we'll be able
to remove the duplicate Michael MIC code in the crypto/ directory.

Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-3-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: add NAN local schedule support

A NAN local schedule consist of a list of NAN channels, and an array
that maps time slots to the channel it is scheduled to (or NULL to indicate
unsche

wifi: mac80211: add NAN local schedule support

A NAN local schedule consist of a list of NAN channels, and an array
that maps time slots to the channel it is scheduled to (or NULL to indicate
unscheduled).

A NAN channel is the configuration of a channel which is used for NAN
operations. It is a new type of chanctx user (before, the only user is a
link). A NAN channel may not have a chanctx assigned if it is ULWed out.

A NAN channel may or may not be scheduled (for example, user space
may want to prepare the resources before the actual schedule is
configured).

Add management of the NAN local schedule.

Since we introduce a new chanctx user, also adjust the different
for_each_chanctx_user_* macros to visit also the NAN channels and take
those into account.

Co-developed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.03350fd40630.Id158f815cfc9b5ab1ebdb8ee608bda426e4d7474@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: add initial UHR support

Add support for making UHR connections and accepting AP
stations with UHR support.

Link: https://patch.msgid.link/20260130164259.7185980484eb.Ieec940b58dbf81

wifi: mac80211: add initial UHR support

Add support for making UHR connections and accepting AP
stations with UHR support.

Link: https://patch.msgid.link/20260130164259.7185980484eb.Ieec940b58dbf8115dab7e1e24cb5513f52c8cb2f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: move element parsing to a new file

This code got really big, move it to a new file.
Pure code move.

Link: https://msgid.link/20240129202041.7f27f7c895e4.I0adfc28bd656a4d44c2bf479662

wifi: mac80211: move element parsing to a new file

This code got really big, move it to a new file.
Pure code move.

Link: https://msgid.link/20240129202041.7f27f7c895e4.I0adfc28bd656a4d44c2bf47966277eecf56cbaa0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: Add support for WBRF features

To support the WBRF mechanism, Wifi adapters utilized in the system must
register the frequencies in use (or unregister those frequencies no longer
used

wifi: mac80211: Add support for WBRF features

To support the WBRF mechanism, Wifi adapters utilized in the system must
register the frequencies in use (or unregister those frequencies no longer
used) via the dedicated calls. So that, other drivers responding to the
frequencies can take proper actions to mitigate possible interference.

Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Link: https://msgid.link/20231211100630.2170152-5-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: add an element parsing unit test

Add a unit test for the parsing of a fragmented sta profile
sub-element inside a fragmented multi-link element.

Signed-off-by: Johannes Berg <johann

wifi: mac80211: add an element parsing unit test

Add a unit test for the parsing of a fragmented sta profile
sub-element inside a fragmented multi-link element.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.333bc75df13f.I0ddfeb6a88a4d89e7c7850e8ef45a4b19b5a061a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: mac80211: move link code to a new file

We probably should've done that originally, we already have
about 300 lines of code there, and will add more. Move all
the link code we wrote to a new fi

wifi: mac80211: move link code to a new file

We probably should've done that originally, we already have
about 300 lines of code there, and will add more. Move all
the link code we wrote to a new file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: Handle station association response with EHT

When the association is an EHT association, parse the EHT
element from the association response and update the
station's EHT capabilities accor

mac80211: Handle station association response with EHT

When the association is an EHT association, parse the EHT
element from the association response and update the
station's EHT capabilities accordingly.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20220214173004.f33574718755.I21182234c5303d9423eabd5eb997e7cf75f8e0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: remove legacy minstrel rate control

Now that minstrel_ht supports legacy rates, it is no longer needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115

mac80211: remove legacy minstrel rate control

Now that minstrel_ht supports legacy rates, it is no longer needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210115120242.89616-4-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: initialize last_rate for S1G STAs

last_rate is initialized to zero by sta_info_alloc(), but
this indicates legacy bitrate for the last TX rate (and
invalid for the last RX rate). To avoid

mac80211: initialize last_rate for S1G STAs

last_rate is initialized to zero by sta_info_alloc(), but
this indicates legacy bitrate for the last TX rate (and
invalid for the last RX rate). To avoid a warning when
decoding the last rate as legacy (before a data frame
has been sent), initialize them as S1G MCS.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20201005164522.18069-2-thomas@adapt-ip.com
[rename to ieee80211_s1g_sta_rate_init(), seems more appropriate]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: Import airtime calculation code from mt76

Felix recently added code to calculate airtime of packets to the mt76
driver. Import this into mac80211 so we can use it for airtime queue limit
c

mac80211: Import airtime calculation code from mt76

Felix recently added code to calculate airtime of packets to the mt76
driver. Import this into mac80211 so we can use it for airtime queue limit
calculations.

The airtime.c file is copied verbatim from the mt76 driver, and adjusted to
be usable in mac80211. This involves:

- Switching to mac80211 data structures.
- Adding support for 160 MHz channels and HE mode.
- Moving the symbol and duration calculations around a bit to avoid
rounding with the higher rates and longer symbol times used for HE rates.

The per-rate TX rate calculation is also split out to its own function so
it can be used directly for the AQL calculations later.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20191119060610.76681-3-kyan@google.com
[fix HE_GROUP_IDX() to use 3 * bw, since there are 3 _gi values]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: minstrel: merge with minstrel_ht, always enable VHT support

Legacy-only devices are not very common and the overhead of the extra
code for HT and VHT rates is not big enough to justify all

mac80211: minstrel: merge with minstrel_ht, always enable VHT support

Legacy-only devices are not very common and the overhead of the extra
code for HT and VHT rates is not big enough to justify all those extra
lines of code to make it optional.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: add support for HE

Add support for HE in mac80211 conforming with P802.11ax_D1.4.

Johannes: Fix another bug with the buf_size comparison in agg-rx.c.

Signed-off-by: Liad Kaufman <liad.ka

mac80211: add support for HE

Add support for HE in mac80211 conforming with P802.11ax_D1.4.

Johannes: Fix another bug with the buf_size comparison in agg-rx.c.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.

Signed-off-by: David S. Mil

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

mac80211: aead api to reduce redundancy

Currently, the aes_ccm.c and aes_gcm.c are almost line by line copy of
each other. This patch reduce code redundancy by moving the code in these
two files to

mac80211: aead api to reduce redundancy

Currently, the aes_ccm.c and aes_gcm.c are almost line by line copy of
each other. This patch reduce code redundancy by moving the code in these
two files to crypto/aead_api.c to make it a higher level aead api. The
file aes_ccm.c and aes_gcm.c are removed and all the functions there are
now implemented in their headers using the newly added aead api.

Signed-off-by: Xiang Gao <qasdfgtyuiop@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Makefile: drop -D__CHECK_ENDIAN__ from cflags

That's the default now, no need for makefiles to set it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>

Makefile: drop -D__CHECK_ENDIAN__ from cflags

That's the default now, no need for makefiles to set it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>

show more ...

mac80211: FILS AEAD protection for station mode association frames

This adds support for encrypting (Re)Association Request frame and
decryption (Re)Association Response frame when using FILS in sta

mac80211: FILS AEAD protection for station mode association frames

This adds support for encrypting (Re)Association Request frame and
decryption (Re)Association Response frame when using FILS in station
mode.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: remove event.c

That file contains just a single function, which itself is just a
single statement to call a different function. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@inte

mac80211: remove event.c

That file contains just a single function, which itself is just a
single statement to call a different function. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: deinline drv_sta_state

With this .config: http://busybox.net/~vda/kernel_config,
after deinlining the function size is 3132 bytes and there are
7 callsites.

Total size reduction: about 20

mac80211: deinline drv_sta_state

With this .config: http://busybox.net/~vda/kernel_config,
after deinlining the function size is 3132 bytes and there are
7 callsites.

Total size reduction: about 20 kbytes.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: John Linville <linville@tuxdriver.com>
CC: Michal Kazior <michal.kazior@tieto.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80111: Add BIP-GMAC-128 and BIP-GMAC-256 ciphers

This allows mac80211 to configure BIP-GMAC-128 and BIP-GMAC-256 to the
driver and also use software-implementation within mac80211 when the
driver

mac80111: Add BIP-GMAC-128 and BIP-GMAC-256 ciphers

This allows mac80211 to configure BIP-GMAC-128 and BIP-GMAC-256 to the
driver and also use software-implementation within mac80211 when the
driver does not support this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80111: Add GCMP and GCMP-256 ciphers

This allows mac80211 to configure GCMP and GCMP-256 to the driver and
also use software-implementation within mac80211 when the driver does
not support this w

mac80111: Add GCMP and GCMP-256 ciphers

This allows mac80211 to configure GCMP and GCMP-256 to the driver and
also use software-implementation within mac80211 when the driver does
not support this with hardware accelaration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
[remove a spurious newline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

mac80211: 802.11p OCB mode support

This patch adds 802.11p OCB (Outside the Context of a BSS) mode
support.

When communicating in OCB mode a mandatory wildcard BSSID
(48 '1' bits) is used.

The EDC

mac80211: 802.11p OCB mode support

This patch adds 802.11p OCB (Outside the Context of a BSS) mode
support.

When communicating in OCB mode a mandatory wildcard BSSID
(48 '1' bits) is used.

The EDCA parameters handling function was changed to support
802.11p specific values.

The insertion of a newly discovered STAs is done in the similar way
as in the IBSS mode -- through the deferred insertion.

The OCB mode uses a periodic 'housekeeping task' for expiration of
disconnected STAs (in the similar manner as in the MESH mode).

New Kconfig option for verbose OCB debugging outputs is added.

Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

cfg80211: make ethtool the driver's responsibility

Currently, cfg80211 tries to implement ethtool, but that doesn't
really scale well, with all the different operations. Make the
lower-level driver

cfg80211: make ethtool the driver's responsibility

Currently, cfg80211 tries to implement ethtool, but that doesn't
really scale well, with all the different operations. Make the
lower-level driver responsible for it, which currently only has
an effect on mac80211. It will similarly not scale well at that
level though, since mac80211 also has many drivers.

To cleanly implement this in mac80211, introduce a new file and
move some code to appropriate places.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...