| #
0ad9617c |
| 22-Jan-2025 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
show more ...
|
| #
bc6a5efe |
| 16-Dec-2024 |
David S. Miller <davem@davemloft.net> |
Merge branch 'net-timestamp-selectable'
Kory Maincent says:
====================
net: Make timestamping selectable
Up until now, there was no way to let the user select the hardware
PTP provider a
Merge branch 'net-timestamp-selectable'
Kory Maincent says:
====================
net: Make timestamping selectable
Up until now, there was no way to let the user select the hardware
PTP provider at which time stamping occurs. The stack assumed that PHY time
stamping is always preferred, but some MAC/PHY combinations were buggy.
This series updates the default MAC/PHY default timestamping and aims to
allow the user to select the desired hwtstamp provider administratively.
Here is few netlink spec usage examples:
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema
--dump tsinfo-get
--json '{"header":{"dev-name":"eth0"}}'
[{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 0, 'qualifier': 0},
'phc-index': 0,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 2, 'name': 'some'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 6,
'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}},
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 2, 'qualifier': 0},
'phc-index': 2,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 1, 'name': 'all'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 1, 'name': 'software-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 3, 'name': 'software-receive'},
{'index': 4,
'name': 'software-system-clock'},
{'index': 6,
'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'},
{'index': 2, 'name': 'onestep-sync'}]},
'nomask': True,
'size': 4}}]
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-get
--json '{"header":{"dev-name":"eth0"},
"hwtst-provider":{"index":0, "qualifier":0 }
}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 0, 'qualifier': 0},
'phc-index': 0,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 2, 'name': 'some'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 6, 'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-set
--json '{"header":{"dev-name":"eth0"},
"hwtst-provider":{"index":2, "qualifier":0}}'
None
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsconfig-get
--json '{"header":{"dev-name":"eth0"}}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtstamp-flags': 1,
'hwtstamp-provider': {'index': 1, 'qualifier': 0},
'rx-filters': {'bits': {'bit': [{'index': 12, 'name': 'ptpv2-event'}]},
'nomask': True,
'size': 16},
'tx-types': {'bits': {'bit': [{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsconfig-set
--json '{"header":{"dev-name":"eth0"},
"hwtstamp-provider":{"index":1, "qualifier":0 },
"rx-filters":{"bits": {"bit": {"name":"ptpv2-l4-event"}},
"nomask": 1},
"tx-types":{"bits": {"bit": {"name":"on"}},
"nomask": 1}}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtstamp-flags': 1,
'hwtstamp-provider': {'index': 1, 'qualifier': 0},
'rx-filters': {'bits': {'bit': [{'index': 12, 'name': 'ptpv2-event'}]},
'nomask': True,
'size': 16},
'tx-types': {'bits': {'bit': [{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
Changes in v21:
- NIT fixes.
- Link to v20: https://lore.kernel.org/r/20241204-feature_ptp_netnext-v20-0-9bd99dc8a867@bootlin.com
Changes in v20:
- Change hwtstamp provider design to avoid saving "user" (phy or net) in
the ptp clock structure.
- Link to v19: https://lore.kernel.org/r/20241030-feature_ptp_netnext-v19-0-94f8aadc9d5c@bootlin.com
Changes in v19:
- Rebase on net-next
- Link to v18: https://lore.kernel.org/r/20241023-feature_ptp_netnext-v18-0-ed948f3b6887@bootlin.com
Changes in v18:
- Few changes in the tsconfig-set ethtool command.
- Add tsconfig-set-reply ethtool netlink socket.
- Add missing netlink tsconfig documentation
- Link to v17: https://lore.kernel.org/r/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com
Changes in v17:
- Fix a documentation nit.
- Add a missing kernel_ethtool_tsinfo update from a new MAC driver.
- Link to v16: https://lore.kernel.org/r/20240705-feature_ptp_netnext-v16-0-5d7153914052@bootlin.com
Changes in v16:
- Add a new patch to separate tsinfo into a new tsconfig command to get
and set the hwtstamp config.
- Used call_rcu() instead of synchronize_rcu() to free the hwtstamp_provider
- Moved net core changes of patch 12 directly to patch 8.
- Link to v15: https://lore.kernel.org/r/20240612-feature_ptp_netnext-v15-0-b2a086257b63@bootlin.com
Changes in v15:
- Fix uninitialized ethtool_ts_info structure.
- Link to v14: https://lore.kernel.org/r/20240604-feature_ptp_netnext-v14-0-77b6f6efea40@bootlin.com
Changes in v14:
- Add back an EXPORT_SYMBOL() missing.
- Link to v13: https://lore.kernel.org/r/20240529-feature_ptp_netnext-v13-0-6eda4d40fa4f@bootlin.com
Changes in v13:
- Add PTP builtin code to fix build errors when building PTP as a module.
- Fix error spotted by smatch and sparse.
- Link to v12: https://lore.kernel.org/r/20240430-feature_ptp_netnext-v12-0-2c5f24b6a914@bootlin.com
Changes in v12:
- Add missing return description in the kdoc.
- Fix few nit.
- Link to v11: https://lore.kernel.org/r/20240422-feature_ptp_netnext-v11-0-f14441f2a1d8@bootlin.com
Changes in v11:
- Add netlink examples.
- Remove a change of my out of tree marvell_ptp patch in the patch series.
- Remove useless extern.
- Link to v10: https://lore.kernel.org/r/20240409-feature_ptp_netnext-v10-0-0fa2ea5c89a9@bootlin.com
Changes in v10:
- Move declarations to net/core/dev.h instead of netdevice.h
- Add netlink documentation.
- Add ETHTOOL_A_TSINFO_GHWTSTAMP netlink attributes instead of a bit in
ETHTOOL_A_TSINFO_TIMESTAMPING bitset.
- Send "Move from simple ida to xarray" patch standalone.
- Add tsinfo ntf command.
- Add rcu_lock protection mechanism to avoid memory leak.
- Fixed doc and kdoc issue.
- Link to v9: https://lore.kernel.org/r/20240226-feature_ptp_netnext-v9-0-455611549f21@bootlin.com
Changes in v9:
- Remove the RFC prefix.
- Correct few NIT fixes.
- Link to v8: https://lore.kernel.org/r/20240216-feature_ptp_netnext-v8-0-510f42f444fb@bootlin.com
Changes in v8:
- Drop the 6 first patch as they are now merged.
- Change the full implementation to not be based on the hwtstamp layer
(MAC/PHY) but on the hwtstamp provider which mean a ptp clock and a
phc qualifier.
- Made some patch to prepare the new implementation.
- Expand netlink tsinfo instead of a new ts command for new hwtstamp
configuration uAPI and for dumping tsinfo of specific hwtstamp provider.
- Link to v7: https://lore.kernel.org/r/20231114-feature_ptp_netnext-v7-0-472e77951e40@bootlin.com
Changes in v7:
- Fix a temporary build error.
- Link to v6: https://lore.kernel.org/r/20231019-feature_ptp_netnext-v6-0-71affc27b0e5@bootlin.com
Changes in v6:
- Few fixes from the reviews.
- Replace the allowlist to default_timestamp flag to know which phy is
using old API behavior.
- Rename the timestamping layer enum values.
- Move to a simple enum instead of the mix between enum and bitfield.
- Update ts_info and ts-set in software timestamping case.
Changes in v5:
- Update to ndo_hwstamp_get/set. This bring several new patches.
- Add few patches to make the glue.
- Convert macb to ndo_hwstamp_get/set.
- Add netlink specs description of new ethtool commands.
- Removed netdev notifier.
- Split the patches that expose the timestamping to userspace to separate
the core and ethtool development.
- Add description of software timestamping.
- Convert PHYs hwtstamp callback to use kernel_hwtstamp_config.
Changes in v4:
- Move on to ethtool netlink instead of ioctl.
- Add a netdev notifier to allow packet trapping by the MAC in case of PHY
time stamping.
- Add a PHY whitelist to not break the old PHY default time-stamping
preference API.
Changes in v3:
- Expose the PTP choice to ethtool instead of sysfs.
You can test it with the ethtool source on branch feature_ptp of:
https://github.com/kmaincent/ethtool
- Added a devicetree binding to select the preferred timestamp.
Changes in v2:
- Move selected_timestamping_layer variable of the concerned patch.
- Use sysfs_streq instead of strmcmp.
- Use the PHY timestamp only if available.
====================
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|