Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.

Current release - regression

Merge tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and CAN.

Current release - regressions:

- netfilter: nf_conncount: fix leaked ct in error paths

- sched: act_mirred: fix loop detection

- sctp: fix potential deadlock in sctp_clone_sock()

- can: fix build dependency

- eth: mlx5e: do not update BQL of old txqs during channel
reconfiguration

Previous releases - regressions:

- sched: ets: always remove class from active list before deleting it

- inet: frags: flush pending skbs in fqdir_pre_exit()

- netfilter: nf_nat: remove bogus direction check

- mptcp:
- schedule rtx timer only after pushing data
- avoid deadlock on fallback while reinjecting

- can: gs_usb: fix error handling

- eth:
- mlx5e:
- avoid unregistering PSP twice
- fix double unregister of HCA_PORTS component
- bnxt_en: fix XDP_TX path
- mlxsw: fix use-after-free when updating multicast route stats

Previous releases - always broken:

- ethtool: avoid overflowing userspace buffer on stats query

- openvswitch: fix middle attribute validation in push_nsh() action

- eth:
- mlx5: fw_tracer, validate format string parameters
- mlxsw: spectrum_router: fix neighbour use-after-free
- ipvlan: ignore PACKET_LOOPBACK in handle_mode_l2()

Misc:

- Jozsef Kadlecsik retires from maintaining netfilter

- tools: ynl: fix build on systems with old kernel headers"

* tag 'net-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: hns3: add VLAN id validation before using
net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx
net: hns3: using the num_tqps in the vf driver to apply for resources
net: enetc: do not transmit redirected XDP frames when the link is down
selftests/tc-testing: Test case exercising potential mirred redirect deadlock
net/sched: act_mirred: fix loop detection
sctp: Clear inet_opt in sctp_v6_copy_ip_options().
sctp: Fetch inet6_sk() after setting ->pinet6 in sctp_clone_sock().
net/handshake: duplicate handshake cancellations leak socket
net/mlx5e: Don't include PSP in the hard MTU calculations
net/mlx5e: Do not update BQL of old txqs during channel reconfiguration
net/mlx5e: Trigger neighbor resolution for unresolved destinations
net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init
net/mlx5: Serialize firmware reset with devlink
net/mlx5: fw_tracer, Handle escaped percent properly
net/mlx5: fw_tracer, Validate format string parameters
net/mlx5: Drain firmware reset in shutdown callback
net/mlx5: fw reset, clear reset requested on drain_fw_reset
net: dsa: mxl-gsw1xx: manually clear RANEG bit
net: dsa: mxl-gsw1xx: fix .shutdown driver operation
...

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'linux-can-fixes-for-6.19-20251210' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2025-12-10

Arnd Bergmann

Merge tag 'linux-can-fixes-for-6.19-20251210' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2025-12-10

Arnd Bergmann's patch fixes a build dependency with the CAN protocols
and drivers introduced in the current development cycle.

The last patch is by me and fixes the error handling cleanup in the
gs_usb driver.

* tag 'linux-can-fixes-for-6.19-20251210' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_can_open(): fix error handling
can: fix build dependency
====================

Link: https://patch.msgid.link/20251210083448.2116869-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

can: fix build dependency

A recent bugfix introduced a new problem with Kconfig dependencies:

WARNING: unmet direct dependencies detected for CAN_DEV
Depends on [n]: NETDEVICES [=n] && CAN [=m]

can: fix build dependency

A recent bugfix introduced a new problem with Kconfig dependencies:

WARNING: unmet direct dependencies detected for CAN_DEV
Depends on [n]: NETDEVICES [=n] && CAN [=m]
Selected by [m]:
- CAN [=m] && NET [=y]

Since the CAN core code now links into the CAN device code, that
particular function needs to be available, though the rest of it
does not.

Revert the incomplete fix and instead use Makefile logic to avoid
the link failure.

Fixes: cb2dc6d2869a ("can: Kconfig: select CAN driver infrastructure by default")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512091523.zty3CLmc-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251204100015.1033688-1-arnd@kernel.org
[mkl: removed module option from CAN_DEV help text (thanks Vincent)]
[mkl: removed '&& CAN' from Kconfig dependency (thanks Vincent)]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing l

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing layer with a lockless list.

Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.

- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.

Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.

Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.

- Optimize the NAPI skb cache, make it larger, use it in more paths.

- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).

- Various data structure layout and prefetch optimizations from Eric.

- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.

- Extend threaded NAPI polling to allow the kthread busy poll for
packets.

- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.

- Support memcg accounting of MPTCP socket memory.

- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.

- Improve heuristics for when to kick off AF_UNIX garbage collection.

- Allow users to control TCP SACK compression, and default to 33% of
RTT.

- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.

- Preserve skb metadata space across skb_push / skb_pull operations.

- Support for IPIP encapsulation in the nftables flowtable offload.

- Support appending IP interface information to ICMP messages (RFC
5837).

- Support setting max record size in TLS (RFC 8449).

- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

- Let users configure the number of write buffers in SMC.

- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.

- Some conversions away from the crypto_ahash API, from Eric Biggers.

- Some preparations for slimming down struct page.

- YAML Netlink protocol spec for WireGuard.

- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.

Driver API:

- Add CAN XL support to the CAN Netlink interface.

- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.

- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).

- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.

- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.

- Add standard device stats for PSP crypto offload.

- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.

- Add uAPI defines for 1.6Tbps link modes.

Device drivers:

- Add Motorcomm YT921x gigabit Ethernet switch support.

- Add MUCSE driver for N500/N210 1GbE NIC series.

- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.

- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.

- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules

- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device

- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices

- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control

- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality

- Bluetooth:
- add initial support for PASTa

- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements

- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...

show more ...

Merge tag 'linux-can-next-for-6.19-20251129' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2025-11-29

The

Merge tag 'linux-can-next-for-6.19-20251129' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2025-11-29

The patch is by Oliver Hartkopp and fixes the compilation of the
CAN_RAW protocol if the CAN driver infrastructure is not enabled.

This problem was introduced in the current development cycle of
net-next.

* tag 'linux-can-next-for-6.19-20251129' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: Kconfig: select CAN driver infrastructure by default
====================

Link: https://patch.msgid.link/20251129125036.467177-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

can: Kconfig: select CAN driver infrastructure by default

The CAN bus support enabled with CONFIG_CAN provides a socket-based
access to CAN interfaces. With the introduction of the latest CAN protoc

can: Kconfig: select CAN driver infrastructure by default

The CAN bus support enabled with CONFIG_CAN provides a socket-based
access to CAN interfaces. With the introduction of the latest CAN protocol
CAN XL additional configuration status information needs to be exposed to
the network layer than formerly provided by standard Linux network drivers.

This requires the CAN driver infrastructure to be selected by default.
As the CAN network layer can only operate on CAN interfaces anyway all
distributions and common default configs enable at least one CAN driver.

So selecting CONFIG_CAN_DEV when CONFIG_CAN is selected by the user has
no effect on established configurations but solves potential build issues
when CONFIG_CAN[_XXX]=y is set together with CANFIG_CAN_DEV=m

Fixes: 1a620a723853 ("can: raw: instantly reject unsupported CAN frames")
Reported-by: Vincent Mailhol <mailhol@kernel.org>
Closes: https://lore.kernel.org/all/CAMZ6RqL_nGszwoLPXn1Li8op-ox4k3Hs6p=Hw6+w0W=DTtobPw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511280531.YnWW2Rxc-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511280842.djCQ0N0O-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511282325.uVQFRTkA-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511291520.guIE1QHj-lkp@intel.com/
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20251129090500.17484-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem a

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.

Core & protocols:

- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT

- Use flex array for netdevice priv area, ensure its cache alignment

- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful

- Support scheduling transmission of packets based on CLOCK_TAI

- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets

- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync

- Improve TCP compliance with RFC 9293 for simultaneous connect()

- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it

- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

- Introduce IPPROTO_SMC for selecting SMC when socket is created

- Allow UDP GSO transmit from devices with no checksum offload

- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding

- nf_tables: shrink memory consumption for transaction objects

Things we sprinkled into general kernel code:

- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]

- Add IRQ information in sysfs for auxiliary bus

- Introduce guard definition for local_lock

- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures

BPF:

- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered

- Add new kfuncs for a generic, open-coded bits iterator

- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head

- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules

- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs

- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter

- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs

Driver API:

- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose

- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits

- Track additional RSS contexts in the core, make sure configuration
changes don't break them

- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths

- Support updating firmware on SFP modules

Tests and tooling:

- mptcp: use net/lib.sh to manage netns

- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints

- openvswitch: make test self-contained (don't depend on OvS CLI
tools)

Drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters

- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration

- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations

- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver

- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status

- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)

- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...

show more ...

Merge tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-06-21

The

Merge tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-06-21

The first 2 patches are by Andy Shevchenko, one cleans up the includes
in the mcp251x driver, the other one updates the sja100 plx_pci driver
to make use of predefines PCI subvendor ID.

Mans Rullgard's patch cleans up the Kconfig help text of for the slcan
driver.

Oliver Hartkopp provides a patch to update the documentation, which
removes the ISO 15675-2 specification version where possible.

The next 2 patches are by Harini T and update the documentation of the
xilinx_can driver.

Francesco Valla provides documentation for the ISO 15765-2 protocol.

A patch by Dr. David Alan Gilbert removes an unused struct from the
mscan driver.

12 patches are by Martin Jocic. The first three add support for 3 new
devices to the kvaser_usb driver. The remaining 9 first clean up the
kvaser_pciefd driver, and then add support for MSI.

Krzysztof Kozlowski contributes 3 patches simplifies the CAN SPI
drivers by making use of spi_get_device_match_data().

The last patch is by Martin Hundebøll, which reworks the m_can driver
to not enable the CAN transceiver during probe.

* tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (24 commits)
can: m_can: don't enable transceiver when probing
can: mcp251xfd: simplify with spi_get_device_match_data()
can: mcp251x: simplify with spi_get_device_match_data()
can: hi311x: simplify with spi_get_device_match_data()
can: kvaser_pciefd: Add MSI interrupts
can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
can: kvaser_pciefd: Change name of return code variable
can: kvaser_pciefd: Rename board_irq to pci_irq
can: kvaser_pciefd: Add unlikely
can: kvaser_pciefd: Add inline
can: kvaser_pciefd: Remove unnecessary comment
can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
can: kvaser_pciefd: Group #defines together
can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
can: kvaser_usb: Add support for Vining 800
can: mscan: remove unused struct 'mscan_state'
Documentation: networking: document ISO 15765-2
can: xilinx_can: Document driver description to list all supported IPs
can: isotp: remove ISO 15675-2 specification version where possible
...
====================

Link: https://patch.msgid.link/20240621080201.305471-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

can: isotp: remove ISO 15675-2 specification version where possible

With the new ISO 15765-2:2024 release the former documentation and comments
have to be reworked. This patch removes the ISO specif

can: isotp: remove ISO 15675-2 specification version where possible

With the new ISO 15765-2:2024 release the former documentation and comments
have to be reworked. This patch removes the ISO specification version/date
where possible.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Francesco Valla <valla.francesco@gmail.com>
Link: https://lore.kernel.org/all/20240420194746.4885-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.