Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- A significant effort all around the stac

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.

This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.

- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.

- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.

- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.

- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.

- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.

- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.

- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.

- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.

- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

- Reduce tcp socket size by one cache line.

- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.

- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.

- Improve xsk generic performances with cache-alignment-oriented
optimizations.

- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.

Driver API:

- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.

- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.

- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.

- Add helper to create, prepare and enable managed clocks.

Device drivers:

- Add Huawei hinic3 PF etherner driver.

- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.

- Add ethernet driver for MaxLinear MxL862xx switches

- Remove parallel-port Ethernet driver.

- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().

- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.

- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors

- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation

- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC

- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework

- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema

- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust

- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling

- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211

- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support

- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections

- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...

show more ...

net: remove HIPPI support and RoadRunner HIPPI driver

HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very hi

net: remove HIPPI support and RoadRunner HIPPI driver

HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very high-end hardware. The HIPPI code has only
received tree-wide changes and fixes by inspection in the entire
Git history. Remove HIPPI support and the rrunner HIPPI driver,
and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.h header because it is used by the TUN
code, and to avoid breaking userspace, however unlikely that may be.

Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Implement the Device Memory TCP transmit path, allo

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.

- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.

- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.

- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.

- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.

- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.

- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.

Netfilter:

- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.

- Implement support for wildcard netdevice in netdev basechain and
flowtables.

- Integrate conntrack information into nft trace infrastructure.

- Export set count and backend name to userspace, for better
introspection.

BPF:

- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.

- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.

Protocols:

- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.

- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.

- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.

- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.

- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.

- Extend TCP drop-reason support to cover PAWS checks.

Driver API:

- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.

- Converted several device drivers to timestamping APIs.

- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.

Tests and tooling:

- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.

- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.

- Extend MPTCP selftests to improve the code-coverage.

- Add tests for XDP tail adjustment in AF_XDP.

New hardware / drivers:

- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.

- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.

- Broadcom asp-v3.0 ethernet driver.

- AMD Renoir ethernet device.

- ReakTek MT9888 2.5G ethernet PHY driver.

- Aeonsemi 10G C45 PHYs driver.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices

- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops

- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support

- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs

- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.

- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna

- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"

* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...

show more ...

net: 802: Remove unused p8022 code

p8022.c defines two external functions, register_8022_client()
and unregister_8022_client(), the last use of which was removed in
2018 by
commit 7a2e838d28cf ("sta

net: 802: Remove unused p8022 code

p8022.c defines two external functions, register_8022_client()
and unregister_8022_client(), the last use of which was removed in
2018 by
commit 7a2e838d28cf ("staging: ipx: delete it from the tree")

Remove the p8022.c file, it's corresponding header, and glue
surrounding it. There was one place the header was included in vlan.c
but it didn't use the functions it declared.

There was a comment in net/802/Makefile about checking
against net/core/Makefile, but that's at least 20 years old and
there's no sign of net/core/Makefile mentioning it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250418011519.145320-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.17 merge window.

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge tag 'v5.15' into next

Sync up with the mainline to get the latest APIs and DT bindings.

Merge branch 'pruss-fix' into fixes

Merge in a fix for pruss reset issue caused by enabling pruss for am335x.

Merge tag 'v5.15-rc2' into spi-5.15

Linux 5.15-rc2

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...