Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.

Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:

- new IIO drivers and updates

- Interconnect driver updates

- fpga driver updates and additions

- fsi driver updates

- mei driver updates

- coresight driver updates

- nvmem driver updates

- counter driver updates

- lots of smaller misc and char driver updates and additions

All of these have been in linux-next for a long time with no reported
problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...

show more ...

Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New devic

Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.

Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.

Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.

* tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
Documentation: ABI: testing: admv8818: add bypass
drivers: iio: filter: admv8818: add bypass mode
iio: light: bd27008: Support BD27010 RGB
iio: light: bu27008: add chip info
dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
iio: add MCP4728 I2C DAC driver
dt-bindings: iio: dac: add mcp4728.yaml
drivers: iio: admv1013: add vcc regulators
dt-bindings: iio: admv1013: add vcc regulators
iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata()
iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver
dt-bindings: iio: admv1014: make all regs required
iio: cdc: ad7150: relax return value check for IRQ get
iio: mb1232: relax return value check for IRQ get
iio: adc: fix the return value handle for platform_get_irq()
tools: iio: iio_generic_buffer: Fix some integer type and calculation
iio: potentiometer: mcp4531: Use i2c_get_match_data()
iio: potentiometer: mcp4018: Use i2c_get_match_data()
iio: core: Fix issues and style of the comments
iio: core: Switch to krealloc_array()
...

show more ...

dt-bindings: iio: adc: qcom,spmi-adc7: use predefined channel ids

Each of qcom,spmi-adc7-pm*.h headers define a set of ADC channels that
can be used for monitoring on thie particular chip. Switch th

dt-bindings: iio: adc: qcom,spmi-adc7: use predefined channel ids

Each of qcom,spmi-adc7-pm*.h headers define a set of ADC channels that
can be used for monitoring on thie particular chip. Switch them to use
channel IDs defined in the dt-bindings/iio/qcom,spmi-vadc.h header
instead of specifying the numeric IDs.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-2-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.11 merge window.

Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

Merge drm/drm-next into drm-intel-next-queued

Sync drm-intel-gt-next here so we can have an unified fixes flow.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'for-linus' into for-next

Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.

Signed-off-by: Takashi Iwai <tiwai@su

Merge branch 'for-linus' into for-next

Back-merge to apply the tasklet conversion patches that are based
on the already applied tasklet API changes on 5.9-rc4.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge branch 'topic/tasklet-convert' into for-linus

Pull tasklet API conversions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge tag 'v5.9-rc2' into regulator-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into asoc-5.9

Linux 5.9-rc2

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst

Merge tag 'v5.9-rc2' into drm-misc-fixes

Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge v5.9-rc1 into drm-misc-next

Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
"Here is the large set of Staging and IIO driver patches fo

Merge tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
"Here is the large set of Staging and IIO driver patches for 5.9-rc1.

Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.

Major things in here:

- lots and lots of IIO new drivers and frameworks added

- IIO driver fixes and updates

- lots of tiny coding style cleanups for staging drivers

- vc04_services major reworks and cleanups

We had 3 set of drivers move out of staging in this round as well:

- wilc1000 wireless driver moved out of staging

- speakup moved out of staging

- most USB driver moved out of staging

Full details are in the shortlog.

All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems"

* tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits)
staging: most: fix up movement of USB driver
staging: rts5208: clear alignment style issues
staging: r8188eu: replace rtw_netdev_priv define with inline function
staging: netlogic: clear alignment style issues
staging: android: ashmem: Fix lockdep warning for write operation
drivers: most: add USB adapter driver
staging: most: Use %pM format specifier for MAC addresses
staging: ks7010: Use %pM format specifier for MAC addresses
staging: qlge: qlge_dbg: removed comment repition
staging: wfx: Use flex_array_size() helper in memcpy()
staging: rtl8723bs: Align macro definitions
staging: rtl8723bs: Clean up function declations
staging: rtl8723bs: Fix coding style errors
drivers: staging: audio: Fix the missing header file for helper file
staging: greybus: audio: Enable GB codec, audio module compilation.
staging: greybus: audio: Add helper APIs for dynamic audio modules
staging: greybus: audio: Resolve compilation error in topology parser
staging: greybus: audio: Resolve compilation errors for GB codec module
staging: greybus: audio: Maintain jack list within GB Audio module
staging: greybus: audio: Update snd_jack FW usage as per new APIs
...

show more ...

Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, cleanups and features for IIO in the 5.

Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, cleanups and features for IIO in the 5.9 cycle

Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.

Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.

New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.

Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.

DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.

Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!

Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)

* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...

show more ...

iio: adc: Add PMIC7 ADC bindings

Add documentation for PMIC7 ADC peripheral.
For the PMIC7-type PMICs, ADC peripheral is present in HW for the
following PMICs: PMK8350, PM8350, PM8350b, PMR735a and

iio: adc: Add PMIC7 ADC bindings

Add documentation for PMIC7 ADC peripheral.
For the PMIC7-type PMICs, ADC peripheral is present in HW for the
following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b.
Of these, only the ADC peripheral on PMK8350 is exposed directly to SW.
If SW needs to communicate with ADCs on other PMICs, it specifies the
PMIC to PMK8350 through the newly added SID register and communication
between PMK8350 ADC and other PMIC ADCs is carried out through
PBS(Programmable Boot Sequence) at the firmware level.

In addition, add definitions for ADC channels and virtual channel
definitions (combination of ADC channel number and PMIC SID number)
per PMIC, to be used by ADC clients for PMIC7.

Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...