Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Chandan Babu:
"Major changes in this release are limited to enabling FITRIM on
realtime devices

Merge tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Chandan Babu:
"Major changes in this release are limited to enabling FITRIM on
realtime devices and Byte-based grant head log reservation tracking.

The remaining changes are limited to fixes and cleanups included in
this pull request.

Core:

- Enable FITRIM on the realtime device

- Introduce byte-based grant head log reservation tracking instead of
physical log location tracking.

This allows grant head to track a full 64 bit bytes space and hence
overcome the limit of 4GB indexing that has been present until now

Fixes:

- xfs_flush_unmap_range() and xfs_prepare_shift() should consider RT
extents in the flush unmap range

- Implement bounds check when traversing log operations during log
replay

- Prevent out of bounds access when traversing a directory data block

- Prevent incorrect ENOSPC when concurrently performing file creation
and file writes

- Fix rtalloc rotoring when delalloc is in use

Cleanups:

- Clean up I/O path inode locking helpers and the page fault handler

- xfs: hoist inode operations to libxfs in anticipation of the
metadata inode directory feature, which maintains a directory tree
of metadata inodes. This will be necessary for further enhancements
to the realtime feature, subvolume support

- Clean up some warts in the extent freeing log intent code

- Clean up the refcount and rmap intent code before adding support
for realtime devices

- Provide the correct email address for sysfs ABI documentation"

* tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (80 commits)
xfs: fix rtalloc rotoring when delalloc is in use
xfs: get rid of xfs_ag_resv_rmapbt_alloc
xfs: skip flushing log items during push
xfs: grant heads track byte counts, not LSNs
xfs: pass the full grant head to accounting functions
xfs: track log space pinned by the AIL
xfs: collapse xlog_state_set_callback in caller
xfs: l_last_sync_lsn is really AIL state
xfs: ensure log tail is always up to date
xfs: background AIL push should target physical space
xfs: AIL doesn't need manual pushing
xfs: move and rename xfs_trans_committed_bulk
xfs: fix the contact address for the sysfs ABI documentation
xfs: Avoid races with cnt_btree lastrec updates
xfs: move xfs_refcount_update_defer_add to xfs_refcount_item.c
xfs: simplify usage of the rcur local variable in xfs_refcount_finish_one
xfs: don't bother calling xfs_refcount_finish_one_cleanup in xfs_refcount_finish_one
xfs: reuse xfs_refcount_update_cancel_item
xfs: add a ci_entry helper
xfs: remove xfs_trans_set_refcount_flags
...

show more ...

xfs: Avoid races with cnt_btree lastrec updates

A concurrent file creation and little writing could unexpectedly return
-ENOSPC error since there is a race window that the allocator could get
the wr

xfs: Avoid races with cnt_btree lastrec updates

A concurrent file creation and little writing could unexpectedly return
-ENOSPC error since there is a race window that the allocator could get
the wrong agf->agf_longest.

Write file process steps:
1) Find the entry that best meets the conditions, then calculate the start
address and length of the remaining part of the entry after allocation.
2) Delete this entry and update the -current- agf->agf_longest.
3) Insert the remaining unused parts of this entry based on the
calculations in 1), and update the agf->agf_longest again if necessary.

Create file process steps:
1) Check whether there are free inodes in the inode chunk.
2) If there is no free inode, check whether there has space for creating
inode chunks, perform the no-lock judgment first.
3) If the judgment succeeds, the judgment is performed again with agf lock
held. Otherwire, an error is returned directly.

If the write process is in step 2) but not go to 3) yet, the create file
process goes to 2) at this time, it may be mistaken for no space,
resulting in the file system still has space but the file creation fails.

We have sent two different commits to the community in order to fix this
problem[1][2]. Unfortunately, both solutions have flaws. In [2], I
discussed with Dave and Darrick, realized that a better solution to this
problem requires the "last cnt record tracking" to be ripped out of the
generic btree code. And surprisingly, Dave directly provided his fix code.
This patch includes appropriate modifications based on his tmp-code to
address this issue.

The entire fix can be roughly divided into two parts:
1) Delete the code related to lastrec-update in the generic btree code.
2) Place the process of updating longest freespace with cntbt separately
to the end of the cntbt modifications. Move the cursor to the rightmost
firstly, and update the longest free extent based on the record.

Note that we can not update the longest with xfs_alloc_get_rec() after
find the longest record, as xfs_verify_agbno() may not pass because
pag->block_count is updated on the outside. Therefore, use
xfs_btree_get_rec() as a replacement.

[1] https://lore.kernel.org/all/20240419061848.1032366-2-yebin10@huawei.com
[2] https://lore.kernel.org/all/20240604071121.3981686-1-wozizhi@huawei.com

Reported by: Ye Bin <yebin10@huawei.com>

Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>

show more ...

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>