Merge tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client updates from Steve French:

- cleanups (moving duplicated code, removing unused code etc)

- fi

Merge tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client updates from Steve French:

- cleanups (moving duplicated code, removing unused code etc)

- fixes relating to "sfu" mount options (for better handling special
file types)

- SMB3.1.1 compression fixes/improvements

* tag 'v6.12-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb: client: fix compression heuristic functions
cifs: Update SFU comments about fifos and sockets
cifs: Add support for creating SFU symlinks
smb: use LIST_HEAD() to simplify code
cifs: Recognize SFU socket type
cifs: Show debug message when SFU Fifo type was detected
cifs: Put explicit zero byte into SFU block/char types
cifs: Add support for reading SFU symlink location
cifs: Fix recognizing SFU symlinks
smb: client: compress: fix an "illegal accesses" issue
smb: client: compress: fix a potential issue of freeing an invalid pointer
smb: client: compress: LZ77 code improvements cleanup
smb: client: insert compression check/call on write requests
smb3: mark compression as CONFIG_EXPERIMENTAL and fix missing compression operation
cifs: Remove obsoleted declaration for cifs_dir_open
smb: client: Use min() macro
cifs: convert to use ERR_CAST()
smb: add comment to STATUS_MCA_OCCURED
smb: move SMB2 Status code to common header file
smb: move some duplicate definitions to common/smbacl.h
...

show more ...

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.

show more ...

cifs: Recognize SFU socket type

SFU since its (first) version 3.0 supports AF_LOCAL sockets and stores them
on filesytem as system file with one zero byte. Add support for detecting
this SFU socket

cifs: Recognize SFU socket type

SFU since its (first) version 3.0 supports AF_LOCAL sockets and stores them
on filesytem as system file with one zero byte. Add support for detecting
this SFU socket type into cifs_sfu_type() function.

With this change cifs_sfu_type() would correctly detect all special file
types created by SFU: fifo, socket, symlink, block and char.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

show more ...

cifs: Show debug message when SFU Fifo type was detected

For debugging purposes it is a good idea to show detected SFU type also for
Fifo. Debug message is already print for all other special types.

cifs: Show debug message when SFU Fifo type was detected

For debugging purposes it is a good idea to show detected SFU type also for
Fifo. Debug message is already print for all other special types.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

show more ...

cifs: Put explicit zero byte into SFU block/char types

SFU types IntxCHR and IntxBLK are 8 bytes with zero as last byte. Make it
explicit in memcpy and memset calls, so the zero byte is visible in t

cifs: Put explicit zero byte into SFU block/char types

SFU types IntxCHR and IntxBLK are 8 bytes with zero as last byte. Make it
explicit in memcpy and memset calls, so the zero byte is visible in the
code (and not hidden as string trailing nul byte).

It is important for reader to show the last byte for block and char types
because it differs from the last byte of symlink type (which has it 0x01).

Also it is important to show that the type is not nul-term string, but
rather 8 bytes (with some printable bytes).

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

show more ...

cifs: Add support for reading SFU symlink location

Currently when sfu mount option is specified then CIFS can recognize SFU
symlink, but is not able to read symlink target location. readlink()
sysca

cifs: Add support for reading SFU symlink location

Currently when sfu mount option is specified then CIFS can recognize SFU
symlink, but is not able to read symlink target location. readlink()
syscall just returns that operation is not supported.

Implement this missing functionality in cifs_sfu_type() function. Read
target location of SFU-style symlink, parse it and fill into fattr's
cf_symlink_target member.

SFU-style symlink is file which has system attribute set and file content
is buffer "IntxLNK\1" (8th byte is 0x01) followed by the target location
encoded in little endian UCS-2/UTF-16. This format was introduced in
Interix 3.0 subsystem, as part of the Microsoft SFU 3.0 and is used also by
all later versions. Previous versions had no symlink support.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

show more ...

cifs: Fix recognizing SFU symlinks

SFU symlinks have 8 byte prefix: "IntxLNK\1".
So check also the last 8th byte 0x01.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfre

cifs: Fix recognizing SFU symlinks

SFU symlinks have 8 byte prefix: "IntxLNK\1".
So check also the last 8th byte 0x01.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

show more ...

Merge v6.11-rc7 into drm-next

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.

Signed-off-by: Simona Vetter <simona.v

Merge v6.11-rc7 into drm-next

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.

Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>

show more ...

Merge tag 'hwmon-for-v6.11-rc7' into review-hans

Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").

This

Merge tag 'hwmon-for-v6.11-rc7' into review-hans

Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").

This is a dependency for a set of WMI event data refactoring changes.

show more ...

Merge drm/drm-next into drm-intel-next

Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.co

Merge drm/drm-next into drm-intel-next

Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get a late RC of v6.10 before moving into v6.11.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'perf/urgent' into perf/core, to pick up fixes

This also refreshes the -rc1 based branch to -rc5.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

spi: Merge up fixes

A patch for Qualcomm depends on some fixes.

Merge branch 'linus' into timers/core

To update with the latest fixes.

Merge tag 'v6.11-rc6' into docs-mw

This is done primarily to get a docs build fix merged via another tree so
that "make htmldocs" stops failing.

Merge branch 'linus' into smp/core

Pull in upstream changes so further patches don't conflict.

ASoC: Intel: Remove skylake driver

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

A spiritual successor to haswell/baytrail removal series [1].

The avs-driver found in sound/soc/in

ASoC: Intel: Remove skylake driver

Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

A spiritual successor to haswell/baytrail removal series [1].

The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.

The skylake-driver related UAPI has been removed with "ASoC: Drop
soc-topology ABI v4 support" [2].

For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.

For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.

All machine board drivers that consume this DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.

[1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@intel.com/

show more ...

Merge branch 'topic/control-lookup-rwlock' into for-next

Pull control lookup optimization changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.12

1. Revert qspinlock to test-and-set simple lock o

Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.12

1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts (sort of) and no adjacent changes.

This merge reverts commit b3c9e65eb

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts (sort of) and no adjacent changes.

This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.

Link: https://patch.msgid.link/20240808170148.362

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.

Link: https://patch.msgid.link/20240808170148.3629934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- fix potential mount hang

- fix retry problem in two types of compound o

Merge tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

- fix potential mount hang

- fix retry problem in two types of compound operations

- important netfs integration fix in SMB1 read paths

- fix potential uninitialized zero point of inode

- minor patch to improve debugging for potential crediting problems

* tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Improve some debugging bits
cifs: Fix SMB1 readv/writev callback in the same way as SMB2/3
cifs: Fix zero_point init on inode initialisation
smb: client: fix double put of @cfile in smb2_set_path_size()
smb: client: fix double put of @cfile in smb2_rename_path()
smb: client: fix hang in wait_for_response() for negproto

show more ...

cifs: Fix zero_point init on inode initialisation

Fix cifs_fattr_to_inode() such that the ->zero_point tracking variable
is initialised when the inode is initialised.

Fixes: 3ee1a1fc3981 ("cifs: Cu

cifs: Fix zero_point init on inode initialisation

Fix cifs_fattr_to_inode() such that the ->zero_point tracking variable
is initialised when the inode is initialised.

Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>

show more ...