Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- Remove tristate choice support from Kconfig

- Stop us

Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- Remove tristate choice support from Kconfig

- Stop using the PROVIDE() directive in the linker script

- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF

- Enable the warning for symbol reference to .exit.* sections by
default

- Fix warnings in RPM package builds

- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays

- Improve choice value calculation in Kconfig

- Fix conditional prompt behavior in choice in Kconfig

- Remove support for the uncommon EMAIL environment variable in Debian
package builds

- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable

- Raise the minimum supported GNU Make version to 4.0

- Remove stale code for the absolute kallsyms

- Move header files commonly used for host programs to scripts/include/

- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux

- Clean up Kconfig

* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...

show more ...

treewide: change conditional prompt for choices to 'depends on'

While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a

treewide: change conditional prompt for choices to 'depends on'

While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a
prompt followed by 'if <expr>'. This conditional controls _only_ the
prompt.

A typical usage is as follows:

menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y

When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. This is reasonable
because you are likely want to enable the block device support. When
EXPERT=y, the prompt is shown, allowing you to toggle BLOCK.

Please note that it is different from 'depends on EXPERT', which would
enable and disable the entire config entry.

However, this conditional prompt has never worked in a choice block.

The following two work in the same way: when EXPERT is disabled, the
choice block is entirely disabled.

[Test Code 1]

choice
prompt "choose" if EXPERT

config A
bool "A"

config B
bool "B"

endchoice

[Test Code 2]

choice
prompt "choose"
depends on EXPERT

config A
bool "A"

config B
bool "B"

endchoice

I believe the first case should hide only the prompt, producing the
default:

CONFIG_A=y
# CONFIG_B is not set

The next commit will change (fix) the behavior of the conditional prompt
in choice blocks.

I see several choice blocks wrongly using a conditional prompt, where
'depends on' makes more sense.

To preserve the current behavior, this commit converts such misuses.

I did not touch the following entry in arch/x86/Kconfig:

choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G

This is truly the correct use of the conditional prompt; when EXPERT=n,
this choice block should silently select the reasonable VMSPLIT_3G,
although the resulting PAGE_OFFSET will not be affected anyway.

Presumably, the one in fs/jffs2/Kconfig is also correct, but I converted
it to 'depends on' to avoid any potential behavioral change.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

show more ...

Merge branch 'ti-sysc-fixes' into fixes

Merge branch 'next' into for-linus

Prepare second round of input updates for 5.3 merge window.

Merge tag 'v5.2' into next

Sync up with mainline to resolve conflicts in iforce driver.

Merge branches 'for-5.2/fixes', 'for-5.3/doc', 'for-5.3/ish', 'for-5.3/logitech' and 'for-5.3/wacom' into for-linus

Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.3

This is a very big update, mainly thanks to Morimoto-san's refactoring
w

Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.3

This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.

- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operat

Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()

Raw NAND controller drivers changes:
- brcmnand:
* fix BCH ECC layout for large page NAND parts
* fallback to detected ecc-strength, ecc-step-size
* when oops in progress use pio and interrupt polling
* code refactor code to introduce helper functions
* add support for v7.3 controller
- FSMC:
* use nand_op_trace for operation tracing
- GPMI:
* move all driver code into single file
* various cleanups (including dmaengine changes)
* use runtime PM to manage clocks
* implement exec_op
- MTK:
* correct low level time calculation of r/w cycle
* improve data sampling timing for read cycle
* add validity check for CE# pin setting
* fix wrongly assigned OOB buffer pointer issue
* re-license MTK NAND driver as Dual MIT/GPL
- STM32:
* manage the get_irq error case
* increase DMA completion timeouts

Raw NAND chips drivers changes:
- Macronix: add read-retry support

Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings

SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips

show more ...

Merge tag 'v5.2-rc6' into rdma.git for-next

For dependencies in next patches.

Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX c

Merge tag 'v5.2-rc6' into rdma.git for-next

For dependencies in next patches.

Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

Merge tag 'v5.2-rc6' into asoc-5.3

Linux 5.2-rc6

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next-fixes

Some fixes have been accidentally pushed to this, so I cannot fost-forward.
Required to pull in the remove-fbcon-notifiers fixes.

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next-fixes

Some fixes have been accidentally pushed to this, so I cannot fost-forward.
Required to pull in the remove-fbcon-notifiers fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'topic/remove-fbcon-notifiers-2019-06-14-1' of git://anongit.freedesktop.org/drm/drm-misc into fbdev-for-next

topic/remove-fbcon-notifiers:
- remove fbdev notifier usage for fbcon, as prep

Merge tag 'topic/remove-fbcon-notifiers-2019-06-14-1' of git://anongit.freedesktop.org/drm/drm-misc into fbdev-for-next

topic/remove-fbcon-notifiers:
- remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking
- assorted locking checks in vt/console code
- assorted notifier and cleanups in fbdev and backlight code

One trivial merge conflict fixed.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

show more ...

Merge tag 'v5.2-rc4' into regulator-5.3

Linux 5.2-rc4

Merge tag 'v5.2-rc4' into mauro

We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.