Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.q

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager Page Splitting for KVM RISC-V
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest

show more ...

Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

Merge tag 'v7.2-rc3' into next

Sync up with mainline to pull in stable fixes to avoid merge conflicts.

Merge drm/drm-fixes into drm-misc-fixes

Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2. The PR contains
a build-time dependency of one of the GPIO commits that will follow.

show more ...

Merge tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

- Fix lots of bugs, most from the late 6.x era, but some going bac

Merge tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:

- Fix lots of bugs, most from the late 6.x era, but some going back
to 2.6.x

- Add subsystems (io-uring, passthrough) and respective maintainers
(Bernd, Joanne and Amir)

- Separate transport and fs layers (Miklos)

- Don't block on cat /dev/fuse (Joanne)

- Perform some refactoring in fuse-uring (Joanne)

- Don't use bounce-buffer for READDIR reply in virtio-fs (Matthew Ochs)

- Clean up documentation (Randy)

- Improve tracing (Amir)

- Extend page cache invalidation after DIO (Cheng Ding)

- Invalidate readdir cache on epoch change (Jun Wu)

- Misc cleanups

* tag 'fuse-update-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (81 commits)
fuse-uring: clear ent->fuse_req in commit_fetch error path
fuse-uring: use named constants for io-uring iovec indices
fuse-uring: refactor setting up copy state for payload copying
fuse-uring: use enum types for header copying
fuse-uring: refactor io-uring header copying from ring
fuse-uring: refactor io-uring header copying to ring
fuse-uring: separate next request fetching from sending logic
fuse: invalidate readdir cache on epoch bump
virtio-fs: avoid double-free on failed queue setup
fuse: invalidate page cache after DIO and async DIO writes
fuse: set ff->flock only on success
fuse: clean up interrupt reading
fuse: remove stray newline in fuse_dev_do_read()
fuse: use READ_ONCE in fuse_chan_num_background()
fuse: dax: Move long delayed work on system_dfl_long_wq
fuse: add fuse_request_sent tracepoint
fuse: Add SPDX ID lines to some files
fuse: use QSTR() instead of QSTR_INIT() in fuse_get_dentry
fuse: convert page array allocation to kcalloc()
fuse: use current creds for backing files
...

show more ...

fuse: create notify.c

Move FUSE_NOTIFY_* handling into a separate source file.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fuse: create poll.c

Move f_op->poll related functions to the new source file.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fuse: split out filesystem part of request sending

Create a new source file: req.c and add the request sending entry
functions:

__fuse_simple_request()
fuse_simple_background()
fuse_simple_no

fuse: split out filesystem part of request sending

Create a new source file: req.c and add the request sending entry
functions:

__fuse_simple_request()
fuse_simple_background()
fuse_simple_notify_reply()

Introduce transport layer sending functions that are called by the
respective fs layer function:

fuse_chan_send()
fuse_chan_send_bg()
fuse_chan_send_notify_reply()

Move calculation of request header fields uid, gid and pid from
fuse_get_req() and fuse_force_creads() to a new helper: fuse_fill_creds().

These fileds are now passed to the transport layer via struct fuse_args.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

fuse: move request timeout code to a new source file

This marks the first step in cleanly separating the transport layer from
the filesystem layer.

Add "dev.h", which will contain the interface def

fuse: move request timeout code to a new source file

This marks the first step in cleanly separating the transport layer from
the filesystem layer.

Add "dev.h", which will contain the interface definition for the transport
layer.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.