Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19

Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:

- more xhci driver updates and fixes

- Thunderbolt driver cleanups

- usb serial driver updates

- typec driver updates

- USB tracepoint additions

- dwc3 driver updates, including support for Apple hardware

- lots of other smaller driver updates and cleanups

All of these have been in linux-next for a while with no reported
issues"

* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...

show more ...

usb: core: Add tracepoints for device allocation and state changes

Introduce new tracepoints to the USB core to improve debuggability of
USB device lifecycle events.

The following tracepoints are a

usb: core: Add tracepoints for device allocation and state changes

Introduce new tracepoints to the USB core to improve debuggability of
USB device lifecycle events.

The following tracepoints are added:

- usb_alloc_dev: Triggered when a new USB device structure is allocated,
providing insights into early device setup.
- usb_set_device_state: Triggered when the USB device state changes,
allowing observation of the device's state transitions.

These tracepoints capture detailed information about the USB device,
including its name, speed, state, bus current value, and authorized
flag. This will aid developers in diagnosing issues related to device
enumeration within the USB subsystem.

Examples:
usb_alloc_dev: usb 1-1 speed UNKNOWN state attached 0mA [authorized]
usb_set_device_state: usb 1-1 speed UNKNOWN state powered 0mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state default 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state default 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state addressed 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state configured 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state suspended 500mA [authorized]
usb_set_device_state: usb 1-1 speed full-speed state not attached 500mA [authorized]

Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251015-usbcore-tracing-v2-2-5a14b5b9d4e0@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'for-6.19/nintendo' into for-linus

- switch to WQ_PERCPU workaueues (Marco Crivellari)
- reduce potential initialization blocking time of hid-nintendo (Willy Huang)

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 6.18-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. I

Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:

- Thunderbolt driver cleanups and additions

- dwc3 driver updates

- dwc2 driver updates

- typec driver updates

- xhci driver updates and additions

- offload USB engine updates for better power management

- unused tracepoint removals

- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers

- new USB device ids

- other minor driver USB driver updates

- new USB I/O driver framework and driver additions"

The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.

All of these have been in linux-next for a while"

* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...

show more ...

Merge patch series "Support system sleep with offloaded usb transfers" into usb-next

Guan-Yu Lin <guanyulin@google.com> says:

Wesley Cheng and Mathias Nyman's USB offload design enables a
co-proces

Merge patch series "Support system sleep with offloaded usb transfers" into usb-next

Guan-Yu Lin <guanyulin@google.com> says:

Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).

This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.

Link: https://lore.kernel.org/r/20250911142051.90822-1-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: offload: add apis for offload usage tracking

Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessi

usb: offload: add apis for offload usage tracking

Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessing the USB device via the same USB host controller. To optimize
power usage, it's essential to monitor whether the USB device is
actively used by other co-processor. This information is vital when
determining if a USB device can be safely suspended during system power
state transitions.

Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250911142051.90822-3-guanyulin@google.com

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.