Merge branch 'for-next' into for-linus

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small

Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
usb: gadget: net2280: Add workaround for AB chip Errata 11
usb: gadget: net2280: Move all "ll" registers in one structure
usb: dwc3: gadget: Workaround Mirosoft's BESL check
usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
usb: cdns3: Add Cadence USB3 DRD Driver
usb: common: Simplify usb_decode_get_set_descriptor function.
usb: common: Patch simplify usb_decode_set_clear_feature function.
usb: common: Separated decoding functions from dwc3 driver.
dt-bindings: add binding for USBSS-DRD controller.
usb: gadget: composite: Set recommended BESL values
usb: dwc3: gadget: Set BESL config parameter
usb: dwc3: Separate field holding multiple properties
usb: gadget: Export recommended BESL values
usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
usb: udc: lpc32xx: silence fall-through warning
usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
usb: udc: lpc32xx: remove set but not used 3 variables
usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
usb: dwc3: st: Add of_dev_put() in probe function
usb: dwc3: st: Add of_node_put() before return in probe function
...

show more ...

usb: cdns3: Add Cadence USB3 DRD Driver

This patch introduce new Cadence USBSS DRD driver to Linux kernel.

The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiate

usb: cdns3: Add Cadence USB3 DRD Driver

This patch introduce new Cadence USBSS DRD driver to Linux kernel.

The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiated as Dual-Role Device (DRD), Peripheral Only and
Host Only (XHCI)configurations.

The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.

The host side of USBSS-DRD controller is compliant with XHCI
specification, so it works with standard XHCI Linux driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

show more ...

Merge branch 'master' into for-5.4/logitech

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid mer

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid merge conflicts, these
commits will go upstream via the powerpc tree as well as the KVM tree.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

show more ...

Merge branch 'ti-sysc-fixes' into fixes

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent

Pull a single EFI fix for v5.3 from Ard:

- Fix mixed mode breakage in EFI config table handling for

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent

Pull a single EFI fix for v5.3 from Ard:

- Fix mixed mode breakage in EFI config table handling for TPM.

show more ...

Merge tag 'v5.3-rc4' into next

Sync up with mainline to bring in device_property_count_u32 andother
newer APIs.

Merge tag 'v5.3-rc3' into drm-next-5.4

Linux 5.3-rc3

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

USB: Move wusbcore and UWB to staging as it is obsolete

The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
loca

USB: Move wusbcore and UWB to staging as it is obsolete

The UWB and wusbcore code is long obsolete, so let us just move the code
out of the real part of the kernel and into the drivers/staging/
location with plans to remove it entirely in a few releases.

Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catching up with 5.3-rc*

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch master from git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

Pick up the spectre documentation so the Grand Schemozzle can be added.

Merge tag 'v5.3-rc1' into regulator-5.3

Linus 5.3-rc1

Merge tag 'v5.3-rc1' into docs-next

Pull in all of the massive docs changes from elsewhere.

Merge v5.3-rc1 into drm-misc-next

Noralf needs some SPI patches in 5.3 to merge some work on tinydrm.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Merge tag 'v5.3-rc1' into patchwork

Linus 5.3-rc1

* tag 'v5.3-rc1': (12816 commits)
Linus 5.3-rc1
iommu/amd: fix a crash in iova_magazine_free_pfns
hexagon: switch to generic version of pte a

Merge tag 'v5.3-rc1' into patchwork

Linus 5.3-rc1

* tag 'v5.3-rc1': (12816 commits)
Linus 5.3-rc1
iommu/amd: fix a crash in iova_magazine_free_pfns
hexagon: switch to generic version of pte allocation
typo fix: it's d_make_root, not d_make_inode...
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
x86/entry/64: Prevent clobbering of saved CR2 value
smp: Warn on function calls from softirq context
KVM: x86: Add fixed counters to PMU filter
KVM: nVMX: do not use dangling shadow VMCS after guest reset
KVM: VMX: dump VMCS on failed entry
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
KVM: Boost vCPUs that are delivering interrupts
KVM: selftests: Remove superfluous define from vmx.c
...

show more ...

Merge branch 'topic/hda-acomp-base' into for-next

Pull the support for AMD / Nvidia HD-audio compmonent notification

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY updates from Greg KH:
"Here is the big USB and PHY driver pull request for 5.3-rc1.

Lots of stu

Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY updates from Greg KH:
"Here is the big USB and PHY driver pull request for 5.3-rc1.

Lots of stuff here, all of which has been in linux-next for a while
with no reported issues. Nothing is earth-shattering, just constant
forward progress for more devices supported and cleanups and small
fixes:

- USB gadget driver updates and fixes

- new USB gadget driver for some hardware, followed by a quick revert
of those patches as they were not ready to be merged...

- PHY driver updates

- Lots of new driver additions and cleanups with a few fixes mixed
in"

* tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
Revert "usb: gadget: storage: Remove warning message"
Revert "dt-bindings: add binding for USBSS-DRD controller."
Revert "usb:gadget Separated decoding functions from dwc3 driver."
Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."
Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."
Revert "usb:cdns3 Add Cadence USB3 DRD Driver"
Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."
usb :fsl: Change string format for errata property
usb: host: Stops USB controller init if PLL fails to lock
usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
usb: phy: Workaround for USB erratum-A005728
usb: fsl: Set USB_EN bit to select ULPI phy
usb: Handle USB3 remote wakeup for LPM enabled devices correctly
drivers/usb/typec/tps6598x.c: fix 4CC cmd write
drivers/usb/typec/tps6598x.c: fix portinfo width
usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
usb: renesas_usbhs: add a workaround for a race condition of workqueue
usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
USB: gadget: function: fix issue Unneeded variable: "value"
...

show more ...

Revert "usb:cdns3 Add Cadence USB3 DRD Driver"

This reverts commit 8bc1901ca7b07d864fca11461b3875b31f949765.

It's broken.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Felipe Balbi <bal

Revert "usb:cdns3 Add Cadence USB3 DRD Driver"

This reverts commit 8bc1901ca7b07d864fca11461b3875b31f949765.

It's broken.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: more changes for v5.3 merge window

Turns out a few more important change

Merge tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: more changes for v5.3 merge window

Turns out a few more important changes came about. We have the new
Cadence DRD Driver being added here and that's the biggest, most
important part.

Together with that we have suport for new imx7ulp phy. Support for
TigerLake Devices on dwc3. Also a couple important fixes which weren't
completed in time for the -rc cycle.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.3-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: renesas_usbhs: add a workaround for a race condition of workqueue
usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
USB: gadget: function: fix issue Unneeded variable: "value"
usb: phy: phy-mxs-usb: add imx7ulp support
doc: dt-binding: mxs-usb-phy: add compatible for 7ulp
usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
usb:cdns3 Add Cadence USB3 DRD Driver
usb:gadget Simplify usb_decode_get_set_descriptor function.
usb:gadget Patch simplify usb_decode_set_clear_feature function.
usb:gadget Separated decoding functions from dwc3 driver.
dt-bindings: add binding for USBSS-DRD controller.
usb: dwc3: pci: add support for TigerLake Devices

show more ...

usb:cdns3 Add Cadence USB3 DRD Driver

This patch introduce new Cadence USBSS DRD driver to Linux kernel.

The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiated

usb:cdns3 Add Cadence USB3 DRD Driver

This patch introduce new Cadence USBSS DRD driver to Linux kernel.

The Cadence USBSS DRD Controller is a highly configurable IP Core which
can be instantiated as Dual-Role Device (DRD), Peripheral Only and
Host Only (XHCI)configurations.

The current driver has been validated with FPGA platform. We have
support for PCIe bus, which is used on FPGA prototyping.

The host side of USBSS-DRD controller is compliant with XHCI
specification, so it works with standard XHCI Linux driver.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

show more ...

USB: move usb debugfs directory creation to the usb common core

The USB gadget subsystem wants to use the USB debugfs root directory, so
move it to the common "core" USB code so that it is properly

USB: move usb debugfs directory creation to the usb common core

The USB gadget subsystem wants to use the USB debugfs root directory, so
move it to the common "core" USB code so that it is properly initialized
and removed as needed.

In order to properly do this, we need to load the common code before the
usb core code, when everything is linked into the kernel, so reorder the
link order of the code.

Also as the usb common code has the possibility of the led trigger logic
to be merged into it, handle the build option properly by only having
one module init/exit function and have the common code initialize the
led trigger if needed.

Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.18 merge window.

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* cl

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* clk-spear:
clk: spear: fix WDT clock definition on SPEAr600

* clk-qcom-msm8998:
clk: qcom: Add MSM8998 Global Clock Control (GCC) driver

show more ...

Merge tag 'v4.17-rc6' into next

Sync up with mainline to bring in Atmel controller changes for Caroline.