Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes

Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.

Lots of little stuff in here, major highlights include:

- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly

- Other thunderbolt updates and changes to make the stream code work

- xhci driver updates and additions

- typec driver updates and additions

- usb gadget driver updates and fixes for reported issues

- zh_CN documentation translation of the USB documentation

- usb-serial driver updates

- dts cleanups for some USB platforms

- other minor USB driver updates and tweaks

All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"

* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...

show more ...

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required fo

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required for the next UBWC
patches.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

usb: cdns3: Add USBSSP platform driver support

Expose Cadence USBSSP through the same platform path as USBSS, trim
Kconfig and Makefile: one core loadable object plus separate glue .ko
files.

Singl

usb: cdns3: Add USBSSP platform driver support

Expose Cadence USBSSP through the same platform path as USBSS, trim
Kconfig and Makefile: one core loadable object plus separate glue .ko
files.

Single cdns.ko bundles core, DRD, the generic "cdns,usb3" platform
driver in cdns3-plat.c, optional host.o, and optional gadget objects.
Use CONFIG_USB_CDNS3_GADGET as a bool to compile gadget support into
that module. Remove duplicate MODULE_* declarations from cdns3-plat.c
now that it links into the same module.

Kconfig: the generic platform driver is selected via CONFIG_USB_CDNS3.
Move CONFIG_USB_CDNSP_PCI beside CONFIG_USB_CDNS3_PCI_WRAP under
"Platform glue driver support". SoC glue entries (TI, i.MX, StarFive)
depend only on CONFIG_USB_CDNS3.

Tighten CONFIG_USB_CDNS_SUPPORT dependencies so the umbrella follows
host or gadget when either is built as a module. Match host and gadget
bools to the cdns.ko tristate with USB=USB_CDNS3 and USB_GADGET=USB_CDNS3
instead of comparing against USB_CDNS_SUPPORT.

Link host.o when CONFIG_USB_CDNS3_HOST is enabled and use that symbol in
host-export.h, removing the redundant CONFIG_USB_CDNS_HOST indirection.

Export cdns_core_init_role and reorganize the function cdns_init, and
controller version could be gotten before the gadget init function is
decided per controller.

Keep host_init / gadget_init callbacks in struct cdns, so core.c does
not need direct linkage to host or gadget objects. Refactor cdnsp-pci.c
into a thin PCI-to-platform wrapper.

drivers/usb/Makefile: descend into drivers/usb/cdns3/ only when
CONFIG_USB_CDNS_SUPPORT is enabled.

Assisted-by: Cursor:claude-4.6-opus
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260421023459.506145-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'timers-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Added the DT bindings for the compatible string 'fsl,imx25-epit'
(Fr

Merge tag 'timers-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Added the DT bindings for the compatible string 'fsl,imx25-epit'
(Frank Li)

- Made the rttm_cs variable static for the rtl otto timer driver
(Krzysztof Kozlowski)

- Fixed error return code handling in the sun5i timer driver (Chen Ni)

- Made the timer-of and the mmio code compatible with modules (Daniel
Lezcano)

Link: https://lore.kernel.org/151feae1-39ba-4abd-a9f9-9bff377a2cd8@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 7.0-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7

Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.

Other than that, nothing major happening here, highlights are:

- lots of dwc3 driver updates and new hardware support added

- usb gadget function driver updates

- usb phy driver updates

- typec driver updates and additions

- USB rust binding updates for syntax and formatting changes

- more usb serial device ids added

- other smaller USB core and driver updates and additions

All of these have been in linux-next for a long time, with no reported
problems"

* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...

show more ...

usb: isp1362-hcd: remove Philips ISP1362 USB OTG controller driver

The last user of the platform driver was a Blackfin BF533 powered board,
and it was removed in commit 4ba66a976072 ("arch: remove b

usb: isp1362-hcd: remove Philips ISP1362 USB OTG controller driver

The last user of the platform driver was a Blackfin BF533 powered board,
and it was removed in commit 4ba66a976072 ("arch: remove blackfin port")
along with the whole Blackfin architecture support 7 years ago.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251226000237.1440642-1-vz@mleia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get a late RC of v6.10 before moving into v6.11.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>