Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY / serial driver updates from Greg KH:
"Here is the "big" set of tty and serial driver updates for 7.3-rc

Merge tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY / serial driver updates from Greg KH:
"Here is the "big" set of tty and serial driver updates for 7.3-rc1.

Not really all that much happened this development cycle for this
subsystem, changes in here are:

- removal of the ipwireless driver as it's no longer used or needed

- new 8250_mxpcie driver added

- qcom serial driver updates and additions

- vt mode validation addition

- lots of other small serial driver updates and additions

All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
serial: imx: serialize imx_uart_ports[] lifetime
tty: clear cdev pointer after cdev_add() failure
tty: skip cdev_del() when no cdev is registered
serial: core: clear freed pointers on uart_register_driver() failure
serial: core: do fallible allocations before the console can be registered
serial: 8250_mxpcie: implement rx_trig_bytes callbacks via MUEx50 RTL
serial: 8250_mxpcie: introduce per-port private data structure
serial: 8250: allow UART drivers to override rx_trig_bytes handling
serial: 8250_mxpcie: add break support for RS485 using MUEx50 features
serial: 8250: allow low-level drivers to override break control
serial: 8250_mxpcie: support serial interface mode switching
serial: 8250_mxpcie: speed up TX using memory-mapped FIFO window
serial: 8250_mxpcie: speed up RX using memory-mapped FIFO window
serial: 8250_mxpcie: add custom handle_irq callback
serial: 8250_mxpcie: offload XON/XOFF flow control to MUEx50 hardware
serial: 8250_mxpcie: enable automatic RTS/CTS flow control
serial: 8250_mxpcie: enable enhanced mode and program FIFO trigger levels
serial: 8250: add Moxa MUEx50 UART port type
serial: 8250: split Moxa PCIe serial board support out of 8250_pci
serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level
...

show more ...

tty: hvc: restrict HVC_DCC to ARMv6+ and ARM64

hvc_dcc drives the JTAG DCC via the ARMv6/v7 CP14 debug registers
(mrc/mcr p14, 0, rX, c0, c1/c5, 0 in asm/dcc.h). That encoding is
undefined on older

tty: hvc: restrict HVC_DCC to ARMv6+ and ARM64

hvc_dcc drives the JTAG DCC via the ARMv6/v7 CP14 debug registers
(mrc/mcr p14, 0, rX, c0, c1/c5, 0 in asm/dcc.h). That encoding is
undefined on older ARM cores, and also on ARMv7-M, but HVC_DCC only
depends on ARM, so it can be enabled on e.g. ARM926 (ARCH_MULTI_V5),
where hvc_dcc_console_init() runs __dcc_putchar() at boot and takes an
undefined-instruction trap before the console is up:

Internal error: Oops - undefined instruction: 0 [#1] ARM
PC is at hvc_dcc_check+0x50/0x8c
hvc_dcc_check from hvc_dcc_console_init+0x18/0x48
hvc_dcc_console_init from console_init+0x58/0x170
Kernel panic - not syncing: Fatal exception

Restrict HVC_DCC to the CPUs where that encoding is valid: the
CPU_V6 || CPU_V6K || CPU_V7 set that arch/arm/include/debug/icedcc.S
guards it with, plus ARM64.

Fixes: 16c63f8ea49c ("drivers: char: hvc: add arm JTAG DCC console support")
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260717071616.91423-1-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to sync before merging the patchset at [1].

[1] https://lore.kernel.org/all/cover.1709913674.git.jani.nikula@intel.com/

Signed-off-by: Thomas Zi

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to sync before merging the patchset at [1].

[1] https://lore.kernel.org/all/cover.1709913674.git.jani.nikula@intel.com/

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A bunch of fixes that came in during the merge window, pr

Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.

show more ...

spi: Merge up v6.8 release

An i.MX fix depends on other fixes that were sent to v6.8.

ASoC: Merge up release

In order to apply additional fixes that depend on the fixes merged for
v6.8 merge up the final release.

Merge 6.8-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge v6.8-rc6 into usb-next

We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c

Reported-by: Stephen Rothwell <sfr@canb.auug.

Merge v6.8-rc6 into usb-next

We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.9

* Set reserved bits as zero in CPUCFG.
* Start SW t

Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.9

* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.

show more ...

Merge branch 'for-6.9/amd-sfh' into for-linus

- assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)

Signed-off-by: Jiri Kosina <jkosina@suse.com>

Merge tag 'v6.8-rc7' into gpio/for-next

Linux 6.8-rc7

Merge tag 'drm-misc-next-2024-02-29' into msm-next

Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")

drm-misc-next for v6.9:

UAPI Changes:

Cross-subs

Merge tag 'drm-misc-next-2024-02-29' into msm-next

Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")

drm-misc-next for v6.9:

UAPI Changes:

Cross-subsystem Changes:

backlight:
- corgi: include backlight header

fbdev:
- Cleanup includes in public header file
- fbtft: Include backlight header

Core Changes:

edid:
- Remove built-in EDID data

dp:
- Avoid AUX transfers on powered-down displays
- Add VSC SDP helpers

modesetting:
- Add sanity checks for polling
- Cleanups

scheduler:
- Cleanups

tests:
- Add helpers for mode-setting tests

Driver Changes:

i915:
- Use shared VSC SDP helper

mgag200:
- Work around PCI write bursts

mxsfb:
- Use managed mode config

nouveau:
- Include backlight header where necessary

qiac:
- Cleanups

sun4:
- HDMI: updates to atomic mode setting

tegra:
- Fix GEM refounting in error paths

tidss:
- Fix multi display
- Fix initial Z position

v3d:
- Support display MMU page size

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next to prepare drm-misc-next-fixes for
the rest of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next up to v6.8-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

S

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge tag 'drm-misc-next-2024-02-08' into msm-next

Merge the drm-misc tree to uprev MSM CI.

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-misc-next

Kickstart 6.9 development cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to v6.8-rc1.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>