Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a n

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.

Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.

Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.

Driver updates in the cache controller, memory controller and reset
controller subsystems.

SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.

TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"

* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...

show more ...

Merge tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers

Add Qualcomm TEE driver (QTEE)

This introduces a Trusted Execution Environment (

Merge tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers

Add Qualcomm TEE driver (QTEE)

This introduces a Trusted Execution Environment (TEE) driver for
Qualcomm TEE (QTEE).

QTEE enables Trusted Applications (TAs) and services to run securely. It
uses an object-based interface, where each service is an object with
sets of operations.

Kernel and userspace services are also available to QTEE through a
similar approach. QTEE makes callback requests that are converted into
object invocations. These objects can represent services within the
kernel or userspace process.

We extend the TEE subsystem to understand object parameters and an ioctl
call so client can invoke objects in QTEE:
- TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_*
- TEE_IOC_OBJECT_INVOKE

The existing ioctl calls TEE_IOC_SUPPL_RECV and TEE_IOC_SUPPL_SEND are
used for invoking services in the userspace process by QTEE.

The TEE backend driver uses the QTEE Transport Message to communicate
with QTEE. Interactions through the object INVOKE interface are
translated into QTEE messages. Likewise, object invocations from QTEE
for userspace objects are converted into SEND/RECV ioctl calls to
supplicants.

* tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
tee: allow a driver to allocate a tee_device without a pool

Link: https://lore.kernel.org/r/20250915174957.GA2040478@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

tee: qcom: add primordial object

After booting, the kernel provides a static object known as the
primordial object. This object is utilized by QTEE for native
kernel services such as yield or privil

tee: qcom: add primordial object

After booting, the kernel provides a static object known as the
primordial object. This object is utilized by QTEE for native
kernel services such as yield or privileged operations.

Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

tee: add Qualcomm TEE driver

Introduce qcomtee_object, which represents an object in both QTEE and
the kernel. QTEE clients can invoke an instance of qcomtee_object to
access QTEE services. If this

tee: add Qualcomm TEE driver

Introduce qcomtee_object, which represents an object in both QTEE and
the kernel. QTEE clients can invoke an instance of qcomtee_object to
access QTEE services. If this invocation produces a new object in QTEE,
an instance of qcomtee_object will be returned.

Similarly, QTEE can request services from by issuing a callback
request, which invokes an instance of qcomtee_object.

Implement initial support for exporting qcomtee_object to userspace
and QTEE, enabling the invocation of objects hosted in QTEE and userspace
through the TEE subsystem.

Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Harshal Dev <quic_hdev@quicinc.com>
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...