Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 7.0-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
"Core:

- Add suuport for "rx-polarity" and "tx-polarity" device tree

Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
"Core:

- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this

New Support:

- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.

- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.

- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver

- TI TCAN1046 phy

- Renesas RZ/V2H(P) and RZ/V2N usb3

- Mediatek MT8188 hdmi-phy

- Google Tensor SoC USB PHY driver

- Apple Type-C PHY

Updates:

- Subsystem conversion for clock round_rate() to determine_rate()

- TI USB3 DT schema conversion

- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"

* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...

show more ...

soc: apple: Add hardware tunable support

Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI,
present on Apple SoCs need machine-specific tunables passed from our
bootloader m1n1 to th

soc: apple: Add hardware tunable support

Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI,
present on Apple SoCs need machine-specific tunables passed from our
bootloader m1n1 to the device tree. Add generic helpers so that we
don't have to duplicate this across multiple drivers.

Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-1-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a n

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.

Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.

Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.

Driver updates in the cache controller, memory controller and reset
controller subsystems.

SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.

TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"

* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...

show more ...

Merge tag 'apple-soc-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers

Apple SoC driver updates for 6.18

Krzysztof Kozlowski asked us to move away from ge

Merge tag 'apple-soc-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers

Apple SoC driver updates for 6.18

Krzysztof Kozlowski asked us to move away from generic compatibles:
- Adjust all dt-bindings to use apple,t8103-XXXX instead of apple,XXXX
as fallback and add a comment that the old generic list should no
longer be extended.
- Add new fallback compatibles to pinctrl, pmdomain, spi, and mca
drivers. These changes have been Acked by their subsystem maintainers
to be merged through our tree together with the dt-bindings.

Support for pre-M1 Apple Silicon:
- SART and mailbox gain support for Apple's A11, which are both
required for NVMe.
- NVMe also gains support for Apple's A11 and the nvme maintainers
prefer that we merge this through the soc tree together with
the mailbox and SART changes.
- SPMI compatibles for A11 and T2 have been added, also going through
the soc tree due to conflicts with the generic compatible removal and
because no driver change is required.

Signed-off-by: Sven Peter <sven@kernel.org>

* tag 'apple-soc-drivers-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: (32 commits)
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
spi: apple: Add "apple,t8103-spi" compatible
ASoC: apple: mca: Add "apple,t8103-mca" compatible
pinctrl: apple: Add "apple,t8103-pinctrl" as compatible
spi: dt-bindings: apple,spi: Add t6020-spi compatible
ASoC: dt-bindings: apple,mca: Add t6020-mca compatible
dt-bindings: dma: apple,admac: Add t6020-admac compatible
dt-bindings: clock: apple,nco: Add t6020-nco compatible
dt-bindings: watchdog: apple,wdt: Add t6020-wdt compatible
dt-bindings: spmi: apple,spmi: Add t6020-spmi compatible
dt-bindings: mfd: apple,smc: Add t6020-smc compatible
dt-bindings: net: bcm4329-fmac: Add BCM4388 PCI compatible
dt-bindings: net: bcm4377-bluetooth: Add BCM4388 compatible
dt-bindings: nvme: apple: Add apple,t6020-nvme-ans2 compatible
dt-bindings: iommu: apple,sart: Add apple,t6020-sart compatible
dt-bindings: gpu: apple,agx: Add agx-{g14s,g14c,g14d} compatibles
dt-bindings: mailbox: apple,mailbox: Add t6020 compatible
dt-bindings: pinctrl: apple,pinctrl: Add apple,t6020-pinctrl compatible
dt-bindings: iommu: dart: Add apple,t6020-dart compatible
...

Link: https://lore.kernel.org/r/20250920123028.49973-1-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

soc: apple: Drop default ARCH_APPLE in Kconfig

When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every s

soc: apple: Drop default ARCH_APPLE in Kconfig

When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.

Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-2-0e6f9cb512c1@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.