Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The
us

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The
usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic,
ibmvfc) plus a few small core updates: a fix for an uninitialized sg
list pad bytes plus the removal of the dma mask check for max sectors.

The big update in the sd driver is mostly code refactoring for obscure
error leg handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: fnic: Fix built-in NVMe/FC build
scsi: fnic: Fix invalid comparison for error
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
scsi: zfcp: Enable CONTEXT_ANALYSIS
scsi: zfcp: Add __must_hold() attribute to zfcp_qdio_sbal_get()
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
scsi: storvsc: Support manual scans for all Hyper-V targets
scsi: sd: Fix sd_done() sense handling condition
scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
scsi: leapraid: Add driver documentation
scsi: leapraid: Add new SCSI driver
scsi: ufs: Add support for the aggregated read query opcode
scsi: ufs: Use unsigned types for the BSG query
scsi: ibmvfc: Fix spelling mistake "Deleteing" -> "Deleting"
scsi: qla2xxx: Update version to 12.00.00.2607b2
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
...

show more ...

Merge patch series "scsi: zfcp: Enable CONTEXT_ANALYSIS"

Heiko Carstens <hca@linux.ibm.com> says:

Enable CONTEXT_ANALYSYS for the zfcp driver.

Static code checking for acquiring and releasing lock

Merge patch series "scsi: zfcp: Enable CONTEXT_ANALYSIS"

Heiko Carstens <hca@linux.ibm.com> says:

Enable CONTEXT_ANALYSYS for the zfcp driver.

Static code checking for acquiring and releasing locks used to be done
with sparse. That was removed with [1] and replaced with a clang based
approach [2]. The new approach requires that each subsystem needs to
be explicitly enabled for checking.

Do that for drivers/s390/scsi. Add a __must_hold() attribute to
zfcp_qdio_sbal_get() to address the only valid warning. Then enable
CONTEXT_ANALYSIS, similar to other patches for drivers/s390 I'm
currently working on.

Link: https://patch.msgid.link/20260806134759.2122369-1-hca@linux.ibm.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>

show more ...

scsi: zfcp: Enable CONTEXT_ANALYSIS

The zfcp driver passes clang's compile time context analysis. Therefore
enable CONTEXT_ANALYSIS.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https:/

scsi: zfcp: Enable CONTEXT_ANALYSIS

The zfcp driver passes clang's compile time context analysis. Therefore
enable CONTEXT_ANALYSIS.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20260806134759.2122369-3-hca@linux.ibm.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>

show more ...

Merge drm-intel-next-queued into gvt-next

Backmerge to pull in
https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts

Conflicts:
init/main.c
lib/Kconfig.debug

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 5.6 merge window.

Merge tag 'v5.5-rc5' into next

Sync up with mainline to get SPI "delay" API changes.

Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'perf-urgent-for-mingo-5.5-20191216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes:

perf top:

Arnaldo Carvalho de Melo:

- Do not

Merge tag 'perf-urgent-for-mingo-5.5-20191216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes:

perf top:

Arnaldo Carvalho de Melo:

- Do not bail out when perf_env__read_cpuid() returns ENOSYS, which
has been reported happening on aarch64.

perf metricgroup:

Kajol Jain:

- Fix printing event names of metric group with multiple events

vendor events:

x86:

Ravi Bangoria:

- Fix Kernel_Utilization metric.

s390:

Ed Maste:

- Fix counter long description for DTLB1_GPAGE_WRITES and L1D_RO_EXCL_WRITES.

perf header:

Michael Petlan:

- Fix false warning when there are no duplicate cache entries

libtraceevent:

Sudip Mukherjee:

- Allow custom libdir path

API headers:

Arnaldo Carvalho de Melo:

- Sync linux/kvm.h with the kernel sources.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/urgent

To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':

7c3977d1e804 libbpf: Fix sym->st_value print on 32-bit arche

Merge remote-tracking branch 'torvalds/master' into perf/urgent

To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':

7c3977d1e804 libbpf: Fix sym->st_value print on 32-bit arches
1fd450f99272 libbpf: Fix up generation of bpf_helper_defs.h

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.5-rc1' into core/kprobes, to resolve conflicts

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into sched/urgent, to pick up the latest before merging new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: aacraid, ufs, zfcp,
NCR5380,

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: aacraid, ufs, zfcp,
NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
plus a whole load of minor updates and fixes.

The major core changes are Al Viro's reworking of sg's handling of
copy to/from user, Ming Lei's removal of the host busy counter to
avoid contention in the multiqueue case and Damien Le Moal's fixing of
residual tracking across error handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
scsi: target: core: Fix a pr_debug() argument
scsi: iscsi: Don't send data to unbound connection
scsi: target: iscsi: Wait for all commands to finish before freeing a session
scsi: target: core: Release SPC-2 reservations when closing a session
scsi: target: core: Document target_cmd_size_check()
scsi: bnx2i: fix potential use after free
Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
scsi: NCR5380: Add disconnect_mask module parameter
scsi: NCR5380: Unconditionally clear ICR after do_abort()
scsi: NCR5380: Call scsi_set_resid() on command completion
scsi: scsi_debug: num_tgts must be >= 0
scsi: lpfc: use hdwq assigned cpu for allocation
scsi: arcmsr: fix indentation issues
scsi: qla4xxx: fix double free bug
scsi: pm80xx: Modified the logic to collect fatal dump
scsi: pm80xx: Tie the interrupt name to the module instance
scsi: pm80xx: Controller fatal error through sysfs
scsi: pm80xx: Do not request 12G sas speeds
scsi: pm80xx: Cleanup command when a reset times out
...

show more ...

scsi: zfcp: diagnostics buffer caching and use for exchange port data

The FCP channel exposes two central interfaces to receive information about
the local FCP-Adapter/-Port: Exchange Port and Excha

scsi: zfcp: diagnostics buffer caching and use for exchange port data

The FCP channel exposes two central interfaces to receive information about
the local FCP-Adapter/-Port: Exchange Port and Exchange Config Data. Using
these commands can negatively impact the adapter if we allow them to be
sent at a very high rate.

The later parts of this patchset will introduce new user-interfaces to
receive more diagnostics from the adapter. To prevent any negative impact
from using those, this patch adds a simple caching-mechanism that will
prevent a malicious/faulty userspace-application from generating an
abnormal high amount of Exchange Port/Config Data traffic.

Relevant diagnostic data that is received via Exchange Config/Port Data is
cached in buffers associated with the corresponding adapter-struct. Each
buffer is associated with a timestamp that signals how old the data is,
and, added via a following patch in this series, lets userspace-interfaces
determine when the data is too old and needs to be updated.

Buffer-updates are made during the normal response path of the
corresponding command. With this patch only the output of the Exchange Port
Data command is captured.

Link: https://lore.kernel.org/r/054ca020ce0a53dc0d9176428bea373898944e6a.1572018130.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.17 merge window.

Merge remote-tracking branches 'asoc/fix/compress', 'asoc/fix/core', 'asoc/fix/dapm', 'asoc/fix/mtk' and 'asoc/fix/stm' into asoc-next

Merge branch 'for-4.16/dax' into libnvdimm-for-next

Merge tag 'v4.15' into next

Sync with mainline to get in trackpoint updates and other changes.

Merge branches 'for-4.16/upstream' and 'for-4.15/upstream-fixes' into for-linus

Pull assorted small fixes queued for merge window.

Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c

From patches mer

Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c

From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

Merge tag 'v4.15' into x86/pti, to be able to merge dependent changes

Time has come to switch PTI development over to a v4.15 base - we'll still
try to make sure that all PTI fixes backport cleanly

Merge tag 'v4.15' into x86/pti, to be able to merge dependent changes

Time has come to switch PTI development over to a v4.15 base - we'll still
try to make sure that all PTI fixes backport cleanly to v4.14 and earlier.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'master' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/torvalds/linux