Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge branch 'master' into mm-stable

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Cross merge.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Store AP Query Configuration Information in a static buffer

- Rewo

Merge tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Store AP Query Configuration Information in a static buffer

- Rework the AP initialization and add missing cleanups to the error
path

- Swap IRQ and AP bus/device registration to avoid race conditions

- Export prot_virt_guest symbol

- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus

- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus

- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG

- Convert sprintf() and snprintf() to sysfs_emit() in CIO code

- Adjust indentation of RELOCS command build step

- Make crypto performance counters upward compatible

- Convert make_page_secure() and gmap_make_secure() to use folio

- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs

- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes

- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data

- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes

- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available

- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that

- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS

- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up

- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap

- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules

- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>

- Put virtual memory layout information into a structure to improve
code generation

- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces

- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context

- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END

- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values

- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools

- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used

- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled

- Uncouple physical and virtual address spaces

- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.

- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value

- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result

- Correct modules thunk offset calculation when branch target is more
than 2GB away

- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it

- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead

- Re-enable shared zeropages for non-PV and non-skeys KVM guests

- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use

- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation

- Make vfio_ap_mdev_link_queue() ignore duplicate link requests

- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state

- Document ap_config sysfs attribute

- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel

- Address gcc -Warray-bounds warning and fix array size in struct
os_info

- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks

- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values

- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled

- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code

- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks

* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...

show more ...

s390/vfio-ap: Add write support to sysfs attr ap_config

Allow writing a complete set of masks to ap_config. Doing so will
cause the vfio-ap driver to replace the vfio-ap mediated device's
matrix mas

s390/vfio-ap: Add write support to sysfs attr ap_config

Allow writing a complete set of masks to ap_config. Doing so will
cause the vfio-ap driver to replace the vfio-ap mediated device's
matrix masks with the given set of masks. If the given state cannot
be set, then no changes are made to the vfio-ap mediated device.

The format of the data written to ap_config is as follows:
{amask},{dmask},{cmask}\n

\n is a newline character.

amask, dmask, and cmask are masks identifying which adapters, domains,
and control domains should be assigned to the mediated device.

The format of a mask is as follows:
0xNN..NN

Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
The leftmost (highest order) bit represents adapter/domain 0.

For an example set of masks that represent your mdev's current
configuration, simply cat ap_config.

This attribute is intended to be used by an mdevctl callout script
supporting the mdev type vfio_ap-passthrough to atomically update a
vfio-ap mediated device's state.

Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-5-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...

s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue

vfio_ap_mdev_link_queue is changed to detect if a matrix_mdev has
already linked the given queue. If so, it bails out.

Signed

s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue

vfio_ap_mdev_link_queue is changed to detect if a matrix_mdev has
already linked the given queue. If so, it bails out.

Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-4-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

show more ...