Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm3

Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.

The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.

The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.

The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"

* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...

show more ...

Merge tag 'reset-for-v6.11' of git://git.pengutronix.de/pza/linux into soc/drivers

Reset controller updates for v6.11

Move reset controller registration to the end in rzg2l-usbphy-ctrl, to
simplify

Merge tag 'reset-for-v6.11' of git://git.pengutronix.de/pza/linux into soc/drivers

Reset controller updates for v6.11

Move reset controller registration to the end in rzg2l-usbphy-ctrl, to
simplify the probe error path, add a new i.MX8MP AudioMix reset driver,
allow to build some drivers under COMPILE_TEST with fewer dependencies,
and use the devm_clk_get_enabled convenience wrapper in meson-audio-arb.

The latter causes a trivial merge conflict [1] with

b99e9c096148f ("reset: meson-audio-arb: Convert to platform remove callback returning void")

because I didn't manage to send that in last round. There is no overlap
though.

[1] https://lore.kernel.org/all/Znmufb9L78FCoSSS@sirena.org.uk/

* tag 'reset-for-v6.11' of git://git.pengutronix.de/pza/linux:
reset: RESET_IMX8MP_AUDIOMIX should depend on ARCH_MXC
reset: zynqmp: allow building under COMPILE_TEST
reset: imx8mp-audiomix: Add AudioMix Block Control reset driver
reset: meson-audio-arb: Use devm_clk_get_enabled()
reset: sti: allow building under COMPILE_TEST
reset: rzg2l-usbphy-ctrl: Move reset controller registration

Link: https://lore.kernel.org/r/20240626163258.61222-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

reset: sti: allow building under COMPILE_TEST

The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.

Reviewed-by: Patrice Chotard <patrice

reset: sti: allow building under COMPILE_TEST

The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-sti-v1-1-b7a66ce29911@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual

Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:

- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips

- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol

- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers

- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...

show more ...

Merge tag 'reset-for-v6.5' of git://git.pengutronix.de/pza/linux into soc/drivers

Reset controller updates for v6.5

Use devm_platform_ioremap_resource() instead of platform_get_resource()
and devm_

Merge tag 'reset-for-v6.5' of git://git.pengutronix.de/pza/linux into soc/drivers

Reset controller updates for v6.5

Use devm_platform_ioremap_resource() instead of platform_get_resource()
and devm_ioremap_resource() in various drivers, simplify the stih407
Kconfig and use regmap_field_read_poll_timeout() instead of open-coded
waiting, and use dev_err_probe() in the meson-audio-arb reset driver.
With its platform gone, remove the now obsolete oxnas reset driver.
Drop depends on the non-user-visible CONFIG_AUXILIARY_BUS symbol.

* tag 'reset-for-v6.5' of git://git.pengutronix.de/pza/linux:
reset: mpfs: select AUXILIARY_BUS
reset: starfive: select AUXILIARY_BUS
reset: oxnas: remove obsolete reset driver
reset: sti: simplify driver's config and build
reset: meson-audio-arb: Use dev_err_probe()
reset: sti: rely on regmap_field_read_poll_timeout for ack wait
reset: brcmstb-rescal: Use devm_platform_ioremap_resource()
reset: meson: Use devm_platform_ioremap_resource()
reset: reset-hsdk: Use devm_platform_ioremap_resource()
reset: lpc18xx: Use devm_platform_ioremap_resource()
reset: axs10x: Use devm_platform_ioremap_resource()
reset: ath79: Use devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/20230511133235.874566-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

reset: sti: simplify driver's config and build

With commit 64933513e461 ("reset: sti: Remove STiH415/6 reset support"),
there is only one sti reset driver left and there no need to define a
dedicate

reset: sti: simplify driver's config and build

With commit 64933513e461 ("reset: sti: Remove STiH415/6 reset support"),
there is only one sti reset driver left and there no need to define a
dedicated config STI_RESET_SYSCFG, which is selected by the config for the
STiH407 reset driver.

Simply add reset-syscfg.c to the build for the STiH407 reset driver.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230330112347.31137-2-lukas.bulwahn@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...