Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TE

Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:

- a bus callback for TEE firmware that device drivers can register to

- sysfs support for tee firmware information

- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver

- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups

- ARM FF-A firmware interoperability improvements

The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.

Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:

- Mediatek MT8196 DVFS power management and mailbox support

- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.

- NXP i.MX9 System Manager firmware support for accessing the syslog

- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"

* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...

show more ...

Merge tag 'reset-for-v6.20' of https://git.pengutronix.de/git/pza/linux into soc/drivers

Reset controller updates for v6.20

* Add a compatible to the reset-gpio driver, suppress the sysfs bind
at

Merge tag 'reset-for-v6.20' of https://git.pengutronix.de/git/pza/linux into soc/drivers

Reset controller updates for v6.20

* Add a compatible to the reset-gpio driver, suppress the sysfs bind
attributes, and propagate GPIO API errors.
* Add support for the i.MX8ULP SIM LPAV reset controller.
* Add RZ/G3S USBPHY suspend/resume support.
* Enable reset-k230 by default on ARCH_CANAAN
* Add support for the SpacemiT K3 SoC reset controller.
* Merge the 'spacemit-clkrst-v6.20-3' tag, shared with the clk tree,
as a dependency for the SpacemiT changes.

* tag 'reset-for-v6.20' of https://git.pengutronix.de/git/pza/linux:
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
reset: gpio: suppress bind attributes in sysfs
clk: spacemit: k3: extract common header
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
reset: gpio: add the "compatible" property

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

reset: spacemit: Add SpacemiT K3 reset driver

Add support for the SpacemiT K3 SoC reset controller. The K3 reset
driver reuses the common reset controller code and provides K3-specific
reset data fo

reset: spacemit: Add SpacemiT K3 reset driver

Add support for the SpacemiT K3 SoC reset controller. The K3 reset
driver reuses the common reset controller code and provides K3-specific
reset data for devices managed by the following units:

- MPMU (Main Power Management Unit)
- APBC (APB clock unit)
- APMU (Application Subsystem Power Management Unit)
- DCIU (DMA Control and Interface Unit)

Acked-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: spacemit: Extract common K1 reset code

Extract the common reset controller code from the K1 driver into
separate reset-spacemit-common.{c,h} files to prepare for additional
SpacemiT SoCs that

reset: spacemit: Extract common K1 reset code

Extract the common reset controller code from the K1 driver into
separate reset-spacemit-common.{c,h} files to prepare for additional
SpacemiT SoCs that share the same reset controller architecture.

The common code includes handlers for reset assert and deassert
operations and probing for auxiliary bus devices.

Changes during extraction:
- Module ownership: Use dev->driver->owner instead of THIS_MODULE in
spacemit_reset_controller_register() to correctly reference the
calling driver's module.
- Rename spacemit_reset_ids to spacemit_k1_reset_ids.
- Define new namespace "RESET_SPACEMIT" for the exported common
functions (spacemit_reset_probe) and update K1 driver to import it.

This prepares for additional SpacemiT SoCs (K3) that share the same reset
controller architecture.

Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: Create subdirectory for SpacemiT drivers

Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 r

reset: Create subdirectory for SpacemiT drivers

Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.

Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.

Also sort the drivers/reset/Kconfig entries alphabetically.

Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...