Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.

Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.

Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:

- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)

- Rust bindings for basic firmware apis and initial driver-core
interactions.

It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.

There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.

- driver core const api changes.

This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.

This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.

- minor devres cleanups and fixes found by code inspection

- arch_topology minor changes

- other minor driver core cleanups

All of these have been in linux-next for a very long time with no
reported problems"

* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...

show more ...

Merge tag 'platform-remove-void-step-b' of https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux into driver-core-next

Uwe writes:

Change struct platform_driver::remove() to return void

T

Merge tag 'platform-remove-void-step-b' of https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux into driver-core-next

Uwe writes:

Change struct platform_driver::remove() to return void

This is step b) of the plan outlined in commit 5c5a7680e67b ("platform:
Provide a remove callback that returns no value"), which completes the
first major step of making the remove callback return no value. Up to
now it returned an int which however was mostly ignored by the driver
core and lured driver authors to believe there is some error handling.

Note that the Linux driver model assumes that removing a device cannot
fail, so this isn't about being lazy and not implementing error handling
in the core and so making .remove return void is the right thing to do.

* tag 'platform-remove-void-step-b' of https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
platform: Make platform_driver::remove() return void
samples: qmi: Convert to platform remove callback returning void
nvdimm/of_pmem: Convert to platform remove callback returning void
nvdimm/e820: Convert to platform remove callback returning void
gpu: ipu-v3: Convert to platform remove callback returning void
gpu: host1x: Convert to platform remove callback returning void
drm/mediatek: Convert to platform remove callback returning void
drm/imagination: Convert to platform remove callback returning void
gpu: host1x: mipi: Benefit from devm_clk_get_prepared()
pps: clients: gpio: Convert to platform remove callback returning void
fsi: occ: Convert to platform remove callback returning void
fsi: master-gpio: Convert to platform remove callback returning void
fsi: master-ast-cf: Convert to platform remove callback returning void
fsi: master-aspeed: Convert to platform remove callback returning void
reset: ti-sci: Convert to platform remove callback returning void
reset: rzg2l-usbphy-ctrl: Convert to platform remove callback returning void
reset: meson-audio-arb: Convert to platform remove callback returning void

show more ...

Merge branch 'reset/next' of git://git.pengutronix.de/pza/linux

Philipp didn't come around to send a pull request in the last
development cycle. His next branch only contains patches converting
thre

Merge branch 'reset/next' of git://git.pengutronix.de/pza/linux

Philipp didn't come around to send a pull request in the last
development cycle. His next branch only contains patches converting
three platform drivers to stop using .remove().

They are merged with his consent to be able to change the prototype of
.remove() in the upcoming development cycle.

Link: https://lore.kernel.org/all/9b7e1a88a812f5c86ada75b094c95b9cf65891c3.camel@pengutronix.de/

show more ...

reset: ti-sci: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error

reset: ti-sci: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/ab374da386cafd6748aac5bdf66e6be3e1860509.1709674157.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Merge branch 'for-6.0/dax' into libnvdimm-fixes

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...