Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:
"Add a remoteproc driver and binding for AMD MicroBlaze/V soft

Merge tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:
"Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores
executing from dual-port BRAM, with clock and reset control and
support for firmware without a resource table.

Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends,
and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord
ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings,
and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur.
Enable BAM-DMUX child devices for PAS modems and fix PAS memory
protection, handover, shutdown, and resource lifetime handling.

Harden remoteproc lifecycle handling by attaching asynchronously,
stopping crashed processors, synchronizing crash work with removal,
and forcing shutdown before device resources are released. Reallocate
resources during attach recovery and fix several reference and
error-path leaks.

Add Xilinx R5 crash detection and move RPU start and stop sequencing
into the platform firmware driver. Consolidate write-combining
carveout mapping callbacks, use correct I/O-memory accessors, and
share optional ELF resource-table handling across drivers.

Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and
generic remoteproc bindings, and harden resource-table iteration
against signed-offset out-of-bounds accesses"

* tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (60 commits)
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
remoteproc: replace BSD blurb with SPDX identifier in rsc_table.h
remoteproc: replace BSD blurb with SPDX identifier in remoteproc.h
remoteproc: fix coding style issues in remoteproc.h
MAINTAINERS: add rsc_table.h to remoteproc entry
remoteproc: qcom: pas: Add Nord ADSP and CDSP support
dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS
remoteproc: qcom: pas: Drop unused dtb_mem_region field
remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset
remoteproc: qcom: pas: Fix the PAS context creation placement
remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check
remoteproc: qcom: annotate mem_region fields with __iomem
arm64: dts: qcom: eliza: Add fallback compatible for ADSP remoteproc
dt-bindings: remoteproc: qcom,milos-pas: Move Eliza ADSP to SM8550 schema
remoteproc: qcom: pas: Add Eliza CDSP support
dt-bindings: remoteproc: qcom,sm8550-pas: Add Eliza CDSP compatible
remoteproc: qcom: q6v5: Request shutdown if crash is triggered host-side
remoteproc: Force shutdown during device removal
remoteproc: Prevent crash handling to race with rproc_del()
remoteproc: Allow shutdown of crashed processors
...

show more ...

remoteproc: Add AMD MicroBlaze/V BRAM-based remote processor driver

Add a remoteproc driver for AMD MicroBlaze/V soft-core processor
subsystems instantiated in programmable logic and using dual-port

remoteproc: Add AMD MicroBlaze/V BRAM-based remote processor driver

Add a remoteproc driver for AMD MicroBlaze/V soft-core processor
subsystems instantiated in programmable logic and using dual-port BRAM
for firmware storage and execution.

The driver parses the firmware memory window from the remoteproc device
node's reg property, interprets that address and size in the
processor-local address space, and then uses standard devicetree address
translation through the parent bus ranges property to obtain the
corresponding Linux-visible system physical address.

The resulting translated region is registered as the executable
remoteproc carveout and coredump segment.

The processor is controlled through an active-low reset GPIO and a
subsystem clock. The clock is enabled before reset is released, and the
processor is kept in reset until firmware loading completes.

The firmware-name property is optional, allowing firmware to be assigned
later through the remoteproc framework. Firmware images without a
resource table are also accepted.

Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Link: https://lore.kernel.org/r/20260714202441.554065-3-ben.levinsky@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:

- Fix resource cleanup in the remoteproc attach error handli

Merge tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux

Pull remoteproc updates from Bjorn Andersson:

- Fix resource cleanup in the remoteproc attach error handling code
paths

- Refactor the various TI K3 drivers to extract and reuse common code
between them

- Add support in the i.MX remoteproc driver for determining from the
firmware if Linux should wait on a "firmware ready" signal at startup

- Improve the Xilinx R5F power down mechanism to handle use cases where
this is shared with other entities in the system

* tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (46 commits)
remoteproc: k3: Refactor release_tsp() functions into common driver
remoteproc: k3: Refactor reserved_mem_init() functions into common driver
remoteproc: k3: Refactor mem_release() functions into common driver
remoteproc: k3: Refactor of_get_memories() functions into common driver
remoteproc: k3: Refactor .da_to_va rproc ops into common driver
remoteproc: k3: Refactor .get_loaded_rsc_table ops into common driver
remoteproc: k3: Refactor .detach rproc ops into common driver
remoteproc: k3: Refactor .attach rproc ops into common driver
remoteproc: k3: Refactor .stop rproc ops into common driver
remoteproc: k3: Refactor .start rproc ops into common driver
remoteproc: k3: Refactor .unprepare rproc ops into common driver
remoteproc: k3: Refactor .prepare rproc ops into common driver
remoteproc: k3-dsp: Assert local reset during .prepare callback
remoteproc: k3-dsp: Don't override rproc ops in IPC-only mode
remoteproc: k3: Refactor rproc_request_mbox() implementations into common driver
remoteproc: k3-m4: Ping the mbox while acquiring the channel
remoteproc: k3: Refactor rproc_release() implementation into common driver
remoteproc: k3-m4: Introduce central function to release rproc from reset
remoteproc: k3-dsp: Correct Reset deassert logic for devices w/o lresets
remoteproc: k3: Refactor rproc_reset() implementation into common driver
...

show more ...

remoteproc: k3: Refactor mailbox rx_callback functions into common driver

The mailbox .rx_callback implementations in TI K3 R5, DSP and M4
remoteproc drivers handle inbound mailbox messages in the s

remoteproc: k3: Refactor mailbox rx_callback functions into common driver

The mailbox .rx_callback implementations in TI K3 R5, DSP and M4
remoteproc drivers handle inbound mailbox messages in the same way.
Introduce a common driver 'ti_k3_common.c' and refactor the
implementations into a common function 'k3_rproc_mbox_callback'() in it.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250513054510.3439842-14-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'for-6.13/wacom' into for-linus

- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that we can
do the sync with the kernel sources.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...