Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- Improve drop account scalability on NUM

Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS

- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions

- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities

- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)

- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath

- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW

- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds

- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete

- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches

- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios

- Improve netfilter matching performance on large sets

- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes

- Allow bridges to redirect to a backup port when the bridge port is
administratively down

- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups

- Add RCU safety to dst->dev, closing a lot of possible races

- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication

- Supports pulling data from an skb frag into the linear area of an
XDP buffer

Things we sprinkled into general kernel code:

- Generate netlink documentation from YAML using an integrated YAML
parser

Driver API:

- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection

- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups

- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath

- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration

- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause

- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor

Device drivers:

- Add a new Huawei driver for 3rd gen NIC (hinic3)

- Add a new SpacemiT driver for K1 ethernet MAC

- Add a generic abstraction for shared memory communication
devices (dibps)

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts

- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency

- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups

- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115

- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling

- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support

- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes

- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"

* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...

show more ...

Merge branch 'ptp-add-pulse-signal-loopback-support-for-debugging'

Wei Fang says:

====================
ptp: add pulse signal loopback support for debugging

Some PTP devices support looping back th

Merge branch 'ptp-add-pulse-signal-loopback-support-for-debugging'

Wei Fang says:

====================
ptp: add pulse signal loopback support for debugging

Some PTP devices support looping back the periodic pulse signal for
debugging. For example, the PTP device of QorIQ platform and the NETC v4
Timer has the ability to loop back the pulse signal and record the extts
events for the loopback signal. So we can make sure that the pulse
intervals and their phase alignment are correct from the perspective of
the emitting PHC's time base. In addition, we can use this loopback
feature as a built-in extts event generator when we have no external
equipment which does that. Therefore, add the generic debugfs interfaces
to the ptp_clock driver. The first two patch are separated from the
previous patch set [1]. The third patch is new added.

[1]: https://lore.kernel.org/imx/20250827063332.1217664-1-wei.fang@nxp.com/ #patch 3 and 9
====================

Link: https://patch.msgid.link/20250905030711.1509648-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ptp: qoriq: convert to use generic interfaces to set loopback mode

Since the generic debugfs interfaces for setting the periodic pulse
signal loopback have been added to the ptp_clock driver, so con

ptp: qoriq: convert to use generic interfaces to set loopback mode

Since the generic debugfs interfaces for setting the periodic pulse
signal loopback have been added to the ptp_clock driver, so convert
the vendor-defined debugfs interfaces to the generic interfaces.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250905030711.1509648-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'add-netc-timer-ptp-driver-and-add-ptp-support-for-i-mx95'

Wei Fang says:

====================
Add NETC Timer PTP driver and add PTP support for i.MX95

This series adds NETC Timer PTP

Merge branch 'add-netc-timer-ptp-driver-and-add-ptp-support-for-i-mx95'

Wei Fang says:

====================
Add NETC Timer PTP driver and add PTP support for i.MX95

This series adds NETC Timer PTP clock driver, which supports precise
periodic pulse, time capture on external pulse and PTP synchronization.
It also adds PTP support to the enetc v4 driver for i.MX95 and optimizes
the PTP-related code in the enetc driver.
====================

Link: https://patch.msgid.link/20250829050615.1247468-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

ptp: netc: add NETC V4 Timer PTP driver support

NETC V4 Timer provides current time with nanosecond resolution, precise
periodic pulse, pulse on timeout (alarm), and time capture on external
pulse s

ptp: netc: add NETC V4 Timer PTP driver support

NETC V4 Timer provides current time with nanosecond resolution, precise
periodic pulse, pulse on timeout (alarm), and time capture on external
pulse support. And it supports time synchronization as required for
IEEE 1588 and IEEE 802.1AS-2020.

Inside NETC, ENETC can capture the timestamp of the sent/received packet
through the PHC provided by the Timer and record it on the Tx/Rx BD. And
through the relevant PHC interfaces provided by the driver, the enetc V4
driver can support PTP time synchronization.

In addition, NETC V4 Timer is similar to the QorIQ 1588 timer, but it is
not exactly the same. The current ptp-qoriq driver is not compatible with
NETC V4 Timer, most of the code cannot be reused, see below reasons.

1. The architecture of ptp-qoriq driver makes the register offset fixed,
however, the offsets of all the high registers and low registers of V4
are swapped, and V4 also adds some new registers. so extending ptp-qoriq
to make it compatible with V4 Timer is tantamount to completely rewriting
ptp-qoriq driver.

2. The usage of some functions is somewhat different from QorIQ timer,
such as the setting of TCLK_PERIOD and TMR_ADD, the logic of configuring
PPS, etc., so making the driver compatible with V4 Timer will undoubtedly
increase the complexity of the code and reduce readability.

3. QorIQ is an expired brand. It is difficult for us to verify whether
it works stably on the QorIQ platforms if we refactor the driver, and
this will make maintenance difficult, so refactoring the driver obviously
does not bring any benefits.

Therefore, add this new driver for NETC V4 Timer. Note that the missing
features like PEROUT, PPS and EXTTS will be added in subsequent patches.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250829050615.1247468-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge branch 'ovl.fixes'

Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.

Signed-off-by: Christian Brauner <brauner@kernel.org>