power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors

This driver is used to control the PCIe M.2 connectors of different
Mechanical Keys attached to the host machines and s

power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors

This driver is used to control the PCIe M.2 connectors of different
Mechanical Keys attached to the host machines and supporting different
interfaces like PCIe/SATA, USB/UART etc...

Currently, this driver supports only the Mechanical Key M connectors with
PCIe interface. The driver also only supports driving the mandatory 3.3v
and optional 1.8v power supplies. The optional signals of the Key M
connectors are not currently supported.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260122-pci-m2-v6-4-575da9f97239@oss.qualcomm.com
[Bartosz: rename pwrseq_pcie_m2_free_resources() to pwrseq_pcie_m2_free_regulators()]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

show more ...

power: sequencing: Add T-HEAD TH1520 GPU power sequencer driver

Introduce the pwrseq-thead-gpu driver, a power sequencer provider for
the Imagination BXM-4-64 GPU on the T-HEAD TH1520 SoC. This driv

power: sequencing: Add T-HEAD TH1520 GPU power sequencer driver

Introduce the pwrseq-thead-gpu driver, a power sequencer provider for
the Imagination BXM-4-64 GPU on the T-HEAD TH1520 SoC. This driver
controls an auxiliary device instantiated by the AON power domain.

The TH1520 GPU requires a specific sequence to correctly initialize and
power down its resources:
- Enable GPU clocks (core and sys).
- De-assert the GPU clock generator reset (clkgen_reset).
- Introduce a short hardware-required delay.
- De-assert the GPU core reset. The power-down sequence performs these
steps in reverse.

Implement this sequence via the pwrseq_power_on and pwrseq_power_off
callbacks.

Crucially, the driver's match function is called when a consumer (the
Imagination GPU driver) requests the "gpu-power" target. During this
match, the sequencer uses clk_bulk_get() and
reset_control_get_exclusive() on the consumer's device to obtain handles
to the GPU's "core" and "sys" clocks, and the GPU core reset. These,
along with clkgen_reset obtained from parent aon node, allow it to
perform the complete sequence.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250623-apr_14_for_sending-v6-1-6583ce0f6c25@samsung.com
[Bartosz: use a ternary operator instead of implicitly casting the
result of a boolean expression to int]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

show more ...

power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets

This adds the power sequencing driver for the PMU modules present on the
Qualcomm WCN Bluetooth and Wifi chipsets. It uses the

power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets

This adds the power sequencing driver for the PMU modules present on the
Qualcomm WCN Bluetooth and Wifi chipsets. It uses the pwrseq subsystem
and knows how to match the sequencer to the consumer device by verifying
the relevant properties and DT layout. Using this driver will allow the
BT and WLAN drivers to respect the required delays between enabling the
two modules.

Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240605123850.24857-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

show more ...

power: sequencing: implement the pwrseq core

Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider par

power: sequencing: implement the pwrseq core

Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider parts but does not implement any new DT bindings so that
the actual power sequencing is never revealed in the DT representation.

Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240605123850.24857-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

show more ...