Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit

Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info pri

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

pinctrl: qcom: Add sc8280xp lpass lpi pinctrl driver

Add pinctrl driver to support pin configuration for LPASS
(Low Power Audio SubSystem) LPI (Low Power Island) pinctrl
on SC8280XP.

This IP is an

pinctrl: qcom: Add sc8280xp lpass lpi pinctrl driver

Add pinctrl driver to support pin configuration for LPASS
(Low Power Audio SubSystem) LPI (Low Power Island) pinctrl
on SC8280XP.

This IP is an additional pin control block for Audio Pins on top the
existing SoC Top level pin-controller.

Hardware setup looks like:

TLMM GPIO[189 - 207] --> LPASS LPI GPIO [0 - 18]

This pin controller has some similarities compared to Top level
msm SoC Pin controller like 'each pin belongs to a single group'
and so on. However this one is intended to control only audio
pins in particular, which can not be configured/touched by the
Top level SoC pin controller except setting them as gpios.
Apart from this, slew rate is also available in this block for
certain pins which are connected to SLIMbus or SoundWire Bus.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220817113747.9111-3-srinivas.kandagatla@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver

Add pinctrl driver to support pin configuration for LPASS
(Low Power Audio SubSystem) LPI (Low Power Island) pinctrl
on SM8450.

This IP is an addi

pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver

Add pinctrl driver to support pin configuration for LPASS
(Low Power Audio SubSystem) LPI (Low Power Island) pinctrl
on SM8450.

This IP is an additional pin control block for Audio Pins on top the
existing SoC Top level pin-controller.

Hardware setup looks like:

TLMM GPIO[165 - 187] --> LPASS LPI GPIO [0 - 22]

This pin controller has some similarities compared to Top level
msm SoC Pin controller like 'each pin belongs to a single group'
and so on. However this one is intended to control only audio
pins in particular, which can not be configured/touched by the
Top level SoC pin controller except setting them as gpios.
Apart from this, slew rate is also available in this block for
certain pins which are connected to SLIMbus or SoundWire Bus.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220817113833.9625-3-srinivas.kandagatla@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
"Outside the pinctrl driver and DT bindings we hit some

Merge tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
"Outside the pinctrl driver and DT bindings we hit some Arm DT files,
patched by the maintainers.

Other than that it is business as usual.

Core changes:

- Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver).

New drivers:

- Intel Meteor Lake support.

- Reneasas RZ/V2M and r8a779g0 (R-Car V4H).

- AXP209 variants AXP221, AXP223 and AXP809.

- Qualcomm MSM8909, PM8226, PMP8074 and SM6375.

- Allwinner D1.

Improvements:

- Proper pin multiplexing in the AMD driver.

- Mediatek MT8192 can use generic drive strength and pin bias, then
fixes on top plus some I2C pin group fixes.

- Have the Allwinner Sunplus SP7021 use the generic DT schema and
make interrupts optional.

- Handle Qualcomm SC7280 ADSP.

- Handle Qualcomm MSM8916 CAMSS GP clock muxing.

- High impedance bias on ZynqMP.

- Serialize StarFive access to MMIO.

- Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO"

* tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits)
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints
pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM
pinctrl: qcom: sm8250: Fix PDC map
pinctrl: amd: Fix an unused variable
dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp
dt-bindings: pinctrl: mt8186: Add gpio-line-names property
ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header
pinctrl: amd: Use unicode for debugfs output
pinctrl: amd: Fix newline declaration in debugfs output
pinctrl: at91: Fix typo 'the the' in comment
dt-bindings: pinctrl: st,stm32: Correct 'resets' property name
pinctrl: mvebu: Missing a blank line after declarations.
pinctrl: qcom: Add SM6375 TLMM driver
dt-bindings: pinctrl: Add DT schema for SM6375 TLMM
dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples
Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"
pinctrl: imx93: Add MODULE_DEVICE_TABLE()
pinctrl: sunxi: Add driver for Allwinner D1
pinctrl: sunxi: Make some layout parameters dynamic
pinctrl: sunxi: Refactor register/offset calculation
...

show more ...

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

pinctrl: qcom: Add SM6375 TLMM driver

Add a driver to control the TLMM block on SM6375. This is an adapted
version of msm-5.4's pinctrl-blair driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@som

pinctrl: qcom: Add SM6375 TLMM driver

Add a driver to control the TLMM block on SM6375. This is an adapted
version of msm-5.4's pinctrl-blair driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220716192900.454653-2-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

pinctrl: qcom: Add pinctrl driver for MSM8909

Make it possible to control pins using the TLMM block in the MSM8909 SoC
by adding the necessary definitions for GPIOs, groups and functions.

The drive

pinctrl: qcom: Add pinctrl driver for MSM8909

Make it possible to control pins using the TLMM block in the MSM8909 SoC
by adding the necessary definitions for GPIOs, groups and functions.

The driver is originally taken from the msm-4.9 release [1] from Qualcomm,
but cleaned up significantly with several fixes and clarifications.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LF.UM.8.7-22500-8x09.0/drivers/pinctrl/qcom/pinctrl-msm8909.c

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220628145502.4158234-3-stephan.gerhold@kernkonzept.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'v5.18'

Linux 5.18