Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
"Core:

- Add suuport for "rx-polarity" and "tx-polarity" device tree

Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
"Core:

- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this

New Support:

- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.

- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.

- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver

- TI TCAN1046 phy

- Renesas RZ/V2H(P) and RZ/V2N usb3

- Mediatek MT8188 hdmi-phy

- Google Tensor SoC USB PHY driver

- Apple Type-C PHY

Updates:

- Subsystem conversion for clock round_rate() to determine_rate()

- TI USB3 DT schema conversion

- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"

* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...

show more ...

phy: Add Google Tensor SoC USB PHY driver

Support the USB PHY found on Google Tensor G5 (Laguna). This
particular USB PHY supports both high-speed and super-speed
operations, and is integrated with

phy: Add Google Tensor SoC USB PHY driver

Support the USB PHY found on Google Tensor G5 (Laguna). This
particular USB PHY supports both high-speed and super-speed
operations, and is integrated with the SNPS DWC3 controller that's
also on the SoC. This initial patch specifically adds functionality
for high-speed.

Co-developed-by: Joy Chakraborty <joychakr@google.com>
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Co-developed-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://patch.msgid.link/20251227-phyb4-v10-2-e8caf6b93fe7@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...