Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that we can
do the sync with the kernel sources.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Wait for device readiness after reset by polling Vend

Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)

- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)

- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)

- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)

- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)

- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)

Driver binding:

- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)

- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)

- Request the PCI BAR used by xboxvideo (Philipp Stanner)

- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)

MSI:

- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)

- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)

Power management:

- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)

PCI device hotplug:

- Remove unnecessary hpc_ops struct from shpchp (ngn)

- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)

Virtualization:

- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)

- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)

IOMMU:

- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)

NPEM:

- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)

- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)

Device trees:

- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)

- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)

Altera PCIe controller driver:

- Convert altera DT bindings from text to YAML (Matthew Gerlach)

- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)

Broadcom STB PCIe controller driver:

- Add DT binding maxItems for reset controllers (Jim Quinlan)

- Use the 'bridge' reset method if described in the DT (Jim Quinlan)

- Use the 'swinit' reset method if described in the DT (Jim Quinlan)

- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)

- Add support for many inbound DMA windows (Jim Quinlan)

- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)

- Add Broadcom 7712 DT description and driver support (Jim Quinlan)

- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)

Freescale i.MX6 PCIe controller driver:

- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)

- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)

- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)

- Call phy_power_off() in the .probe() error path (Frank Li)

- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)

- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)

- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)

- Expand comments for erratum ERR010728 workaround (Frank Li)

- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)

- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)

Freescale Layerscape PCIe controller driver:

- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)

- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)

- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)

Loongson PCIe controller driver:

- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)

Marvell Aardvark PCIe controller driver:

- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)

MediaTek PCIe Gen3 controller driver:

- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)

- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)

- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)

Qualcomm PCIe controller driver:

- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)

- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)

- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)

- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)

- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)

- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)

- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)

- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)

- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)

- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)

- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)

- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)

- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)

Renesas R-Car PCIe controller driver:

- Make the read-only const array 'check_addr' static (Colin Ian King)

- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)

TI DRA7xx PCIe controller driver:

- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)

- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)

TI J721E PCIe driver:

- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)

- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)

- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)

- Add j721e suspend and resume support (Théo Lebrun)

TI Keystone PCIe controller driver:

- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)

Xilinx NWL PCIe controller driver:

- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)

- Rate-limit misc interrupt messages (Sean Anderson)

- Turn off the clock on probe failure and device removal (Sean
Anderson)

- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)

- Add PCIe phy bindings for the ZCU102 (Sean Anderson)

Xilinx XDMA PCIe controller driver:

- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)

Miscellaneous:

- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)

- Fix minor kerneldoc issues and typos (Bjorn Helgaas)

- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)

- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)

- Make pci_bus_type constant (Kunwu Chan)

- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)

- Remove any leftover .*.cmd files with make clean (zhang jiao)

- Remove unused BILLION macro (zhang jiao)"

* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...

show more ...

Merge branch 'pci/controller/affinity'

- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ
line and cannot set the affinity of each MSI to a specific CPU core
(Marek Vasu

Merge branch 'pci/controller/affinity'

- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ
line and cannot set the affinity of each MSI to a specific CPU core
(Marek Vasut)

- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and
xilinx drivers to avoid "IRQ: set affinity failed" warnings (Marek Vasut)

* pci/controller/affinity:
PCI: xilinx: Silence 'set affinity failed' warning
PCI: xilinx-xdma: Silence 'set affinity failed' warning
PCI: xilinx-nwl: Silence 'set affinity failed' warning
PCI: vmd: Silence 'set affinity failed' warning
PCI: tegra: Silence 'set affinity failed' warning
PCI: rcar-host: Silence 'set affinity failed' warning
PCI: plda: Silence 'set affinity failed' warning
PCI: mobiveil: Silence 'set affinity failed' warning
PCI: mediatek: Silence 'set affinity failed' warning
PCI: mediatek-gen3: Silence 'set affinity failed' warning
PCI: dwc: Silence 'set affinity failed' warning
PCI: brcmstb: Silence 'set affinity failed' warning
PCI: altera-msi: Silence 'set affinity failed' warning
PCI: aardvark: Silence 'set affinity failed' warning
genirq/msi: Silence 'set affinity failed' warning

show more ...

Merge branch 'pci/crs'

- Wait for device readiness after reset by polling Vendor ID and looking
for Configuration RRS instead of polling the Command register and looking
for non-error completion

Merge branch 'pci/crs'

- Wait for device readiness after reset by polling Vendor ID and looking
for Configuration RRS instead of polling the Command register and looking
for non-error completions (Bjorn Helgaas)

- Fix an aardvark issue with emulating Configuration RRS for two-byte reads
of Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)

- Rename CRS Completion Status to RRS to match spec usage (Bjorn Helgaas)

* pci/crs:
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS

show more ...

PCI: Rename CRS Completion Status to RRS

PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status"
Completion Status from "CRS" to "RRS" and uses the terminology of
"Configuration

PCI: Rename CRS Completion Status to RRS

PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status"
Completion Status from "CRS" to "RRS" and uses the terminology of
"Configuration RRS Software Visibility" instead of "CRS Software
Visibility".

Align the Linux usage with the r6.0 spec language. No functional change
intended.

It's confusing to make this change, but I think "RRS" *is* a better
abbreviation because it was easy to interpret "CRS" as "Completion Retry
Status", which really didn't make any sense.

Link: https://lore.kernel.org/r/20240827234848.4429-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

show more ...

PCI: aardvark: Correct Configuration RRS checking

Per PCIe r6.0, sec 2.3.2, when a Root Complex handles a Completion with
Request Retry Status for a Configuration Read Request that includes both
byt

PCI: aardvark: Correct Configuration RRS checking

Per PCIe r6.0, sec 2.3.2, when a Root Complex handles a Completion with
Request Retry Status for a Configuration Read Request that includes both
bytes of the Vendor ID field, it must complete the Request to the host by
returning 0001h for the Vendor ID and all 1's for any additional bytes.

Previously we only returned the 0001h Vendor ID value if we got an RRS
completion for reads of exactly 4 bytes. A read of 2 bytes would not
qualify, although the spec says it should.

Check for reads of 2 or more bytes including the Vendor ID.

I don't think this will fix any observable problems because RRS only
applies to the first config reads after reset, and those are all currently
dword (4-byte) reads.

Link: https://lore.kernel.org/r/20240827234848.4429-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

show more ...

PCI: aardvark: Silence 'set affinity failed' warning

Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:

I

PCI: aardvark: Silence 'set affinity failed' warning

Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:

IRQ...: set affinity failed(-22)

Remove the .irq_set_affinity() implementation that is no longer needed.

Link: https://lore.kernel.org/r/20240723132958.41320-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

show more ...

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the gener

Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)

- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)

Resource management:

- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)

- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)

- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)

- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)

- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)

- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)

- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)

Driver binding:

- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)

- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)

- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)

- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)

- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)

- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)

- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)

Error handling:

- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)

- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)

Power management:

- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)

PCIe native device hotplug:

- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)

Virtualization:

- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)

Peer-to-peer DMA:

- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)

Endpoint framework:

- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)

- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)

- Make struct pci_epc_class constant (Greg Kroah-Hartman)

- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)

- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)

- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)

- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)

- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)

- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)

- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)

- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)

Device tree bindings:

- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)

Amazon Annapurna Labs PCIe controller driver:

- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)

Axis ARTPEC-6 PCIe controller driver:

- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)

Freescale i.MX6 PCIe controller driver:

- Convert to agnostic GPIO API (Andy Shevchenko)

Freescale Layerscape PCIe controller driver:

- Make struct mobiveil_rp_ops constant (Christophe JAILLET)

- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)

HiSilicon Kirin PCIe controller driver:

- Convert to agnostic GPIO API (Andy Shevchenko)

- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)

Intel VMD host bridge driver:

- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)

Loongson PCIe controller driver:

- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)

Microchip AXI PolarFlare PCIe controller driver:

- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)

- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)

- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)

- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)

- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)

- Rework to use PLDA core (Minda Chen)

Microsoft Hyper-V host bridge driver:

- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)

NVIDIA Tegra194 PCIe controller driver:

- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)

- Set 64KB inbound ATU alignment restriction (Jon Hunter)

Qualcomm PCIe controller driver:

- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)

- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)

- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)

- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)

- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)

- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)

- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)

- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)

- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)

- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)

- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)

- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)

- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)

- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)

Renesas R-Car PCIe controller driver:

- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)

- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)

Rockchip PCIe controller driver:

- Assert PERST# for 100ms after power is stable (Damien Le Moal)

- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)

- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)

Rockchip DesignWare PCIe controller driver:

- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)

- Add missing INTx signals to common DT binding (Niklas Cassel)

- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)

- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)

- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)

- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)

- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)

Samsung Exynos PCIe controller driver:

- Use bulk clock APIs to simplify clock setup (Shradha Todi)

StarFive PCIe controller driver:

- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)

Synopsys DesignWare PCIe controller driver:

- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)

- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)

- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)

- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)

- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)

- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)

- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)

- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)

- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)

- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)

- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)

- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)

TI DRA7xx PCIe controller driver:

- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)

TI Keystone PCIe controller driver:

- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)

- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)

- Leave BAR 0 disabled for AM654x to fix a regression caused by
6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), which caused a 45-second boot delay (Siddharth
Vadapalli)

Xilinx Versal CPM PCIe controller driver:

- Fix overlapping bridge registers and 32-bit BAR addresses in DT
binding (Thippeswamy Havalige)

MicroSemi Switchtec management driver:

- Make struct switchtec_class constant (Greg Kroah-Hartman)

Miscellaneous:

- Remove unused struct acpi_handle_node (Dr. David Alan Gilbert)

- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)"

* tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits)
PCI: loongson: Enable MSI in LS7A Root Complex
PCI: Extend ACS configurability
PCI: Add missing bridge lock to pci_bus_lock()
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: vmd: Create domain symlink before pci_bus_add_devices()
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
...

show more ...

Merge branch 'pci/controller/gpio'

- Include <linux/irqchip/chained_irq.h> in dra7xx to avoid implicitly
including it elsewhere (Andy Shevchenko)

- Remove unused <linux/of_gpio.h> from aardvark a

Merge branch 'pci/controller/gpio'

- Include <linux/irqchip/chained_irq.h> in dra7xx to avoid implicitly
including it elsewhere (Andy Shevchenko)

- Remove unused <linux/of_gpio.h> from aardvark and dwc drivers (dra7xx,
meson, qcom, tegra194) (Andy Shevchenko)

- Convert kirin to use scoped for_each_available_child_of_node() to ease
future error exits (Javier Carrasco)

- Convert imx6 and kirin to use the agnostic GPIO API to simplify GPIO
setup and remove usage of the deprecated of_gpio.h API (Andy Shevchenko)

* pci/controller/gpio:
PCI: kirin: Convert to use agnostic GPIO API
PCI: kirin: Convert kirin_pcie_parse_port() to scoped iterator
PCI: imx6: Convert to use agnostic GPIO API
PCI: dwc: Remove unused of_gpio.h inclusion
PCI: aardvark: Remove unused of_gpio.h inclusion
PCI: dra7xx: Add missing chained IRQ header inclusion

show more ...

PCI: aardvark: Remove unused of_gpio.h inclusion

The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.

[kwilczynski: commit log]
Lin

PCI: aardvark: Remove unused of_gpio.h inclusion

The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.