Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Resource management:

- Add hotplug reservation only once (not at each

Merge tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Resource management:

- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)

Driver binding:

- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)

Error handling:

- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)

- Log Error Source only once, not twice in separate messages (Lukas
Wunner)

- Emit TLP Log only for unmasked errors (Lukas Wunner)

- Support Advisory Non-Fatal Errors (Lukas Wunner)

- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)

ASPM:

- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)

- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)

- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)

Power management:

- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)

- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)

Power control:

- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)

- For the TC9563 PCIe switch:

- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)

- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)

- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)

- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)

Virtualization:

- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)

- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)

Procfs:

- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)

- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)

- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)

Sysfs:

- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)

- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)

- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)

- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)

- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)

- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)

Peer-to-peer DMA:

- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)

Endpoint framework:

- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)

- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)

New native PCIe controller drivers:

- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)

Native PCIe controllers:

- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)

Generic host bridge driver:

- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)

Amlogic Meson PCIe controller driver:

- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)

ASPEED PCIe controller driver:

- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)

Cadence PCIe controller driver:

- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)

- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)

- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)

- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)

Freescale i.MX6 PCIe controller driver:

- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)

- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)

- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)

- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)

- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)

- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)

Intel VMD host bridge driver:

- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)

- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)

- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)

- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)

MediaTek PCIe controller driver:

- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)

MediaTek PCIe Gen3 controller driver:

- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)

NVIDIA Tegra264 PCIe controller driver:

- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)

- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)

Qualcomm PCIe controller driver:

- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)

- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)

- Add DT binding and driver support for Hawi SoC (Matthew Leung)

- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)

- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)

Renesas R-Car PCIe controller driver:

- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)

- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)

- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)

- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)

Renesas RZ/G3S PCIe controller driver:

- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)

SpacemiT K1 PCIe controller driver:

- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)

StarFive PCIe controller driver:

- Fix resource leaks on error paths in host_init() (Ali Tariq)

- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)

- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)

Synopsys DesignWare PCIe controller driver:

- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)

- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)

- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)

- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)

- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)

UltraRISC PCIe controller driver:

- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)

- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)

MicroSemi Switchtec management driver:

- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)

Miscellaneous:

- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)

- Fix typos in documentation (D'Orus Tsitera)

- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"

* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...

show more ...

Merge branch 'pci/controller/cadence'

- Add missing MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)

- Add debugfs 'ltssm_status' file for LGA- and HP

Merge branch 'pci/controller/cadence'

- Add missing MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)

- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)

- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)

- Fix host/endpoint dependencies for cadence-plat driver to fix link error
when cadence-plat is built-in but the host or endpoint driver is modular
(Aksh Garg)

* pci/controller/cadence:
PCI: cadence: Fix host/endpoint dependencies for cadence-plat driver
PCI: j721e: Fix incorrect max_lanes for J7200
PCI: cadence: Add LGA IP debugfs for LTSSM status
PCI: cadence: Add HPA IP debugfs for LTSSM status
PCI: cadence: Add HPA architecture flag
PCI: cadence: Add missing MODULE_DEVICE_TABLE()

show more ...

PCI: cadence: Fix host/endpoint dependencies for cadence-plat driver

The cadence-plat driver has a single platform driver that can be built-in
or a loadable module, but it calls two separate backend

PCI: cadence: Fix host/endpoint dependencies for cadence-plat driver

The cadence-plat driver has a single platform driver that can be built-in
or a loadable module, but it calls two separate backend drivers depending
on whether it is a host or endpoint.

If one of the mode is build as built-in and another as loadable module,
we end up with a situation where the built-in pcie-cadence-plat driver
tries to call the modular host or endpoint driver, which causes a link
failure:

ld: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pcie-cadence-plat.c
>>> drivers/pci/controller/cadence/pcie-cadence-plat.o:(cdns_plat_pcie_probe) in archive vmlinux.a

ld: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pcie-cadence-plat.c
>>> drivers/pci/controller/cadence/pcie-cadence-plat.o:(cdns_plat_pcie_probe) in archive vmlinux.a

Fix this by moving the 'select' of PCIE_CADENCE_HOST and PCIE_CADENCE_EP
from the individual PLAT_HOST/PLAT_EP symbols into the common PCIE_CADENCE_PLAT
symbol, conditioned on which backends (modes) are enabled.

Fixes: 611627a4e5e4 ("PCI: cadence: Add module support for platform controller driver")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-next/589ea512-93c6-4e1c-83d7-ba45a0b35843@infradead.org/
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260805105014.3952686-1-a-garg7@ti.com

show more ...

PCI: cadence: Add HPA IP debugfs for LTSSM status

Add debugfs support for HPA-based Cadence PCIe controllers. A new file
'ltssm_status' is created under debugfs, allowing users to read the
current L

PCI: cadence: Add HPA IP debugfs for LTSSM status

Add debugfs support for HPA-based Cadence PCIe controllers. A new file
'ltssm_status' is created under debugfs, allowing users to read the
current LTSSM state as a string and raw value.

Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: fixed the makefile and dropped MODULE_* macros]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Aksh Garg <a-garg7@ti.com>
Link: https://patch.msgid.link/20260701073513.1101559-3-18255117159@163.com

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Enable host bridge emulation for PCI_DOMAINS_GENERIC

Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)

- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)

- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)

Resource management:

- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)

- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)

- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)

- Move Resizable BAR code to rebar.c (Ilpo Järvinen)

- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)

- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)

Power management and error handling:

- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)

- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)

- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)

- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)

- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)

Power control:

- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)

- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)

Endpoint framework:

- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)

- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)

New native PCIe controller drivers:

- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)

- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)

- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)

- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)

Amlogic Meson PCIe controller driver:

- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)

Apple PCIe controller driver:

- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)

Broadcom STB PCIe controller driver:

- Disable advertising ASPM L0s support correctly (Jim Quinlan)

- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)

Cadence PCIe controller driver:

- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)

- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)

MediaTek PCIe controller driver:

- Convert DT binding to YAML schema (Christian Marangi)

- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)

Qualcomm PCIe controller driver:

- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)

- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)

- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)

Rockchip DesignWare PCIe controller driver:

- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)

STMicroelectronics STM32MP25 PCIe controller driver:

- Fix a race between link training and endpoint register
initialization (Christian Bruel)

- Align endpoint allocations to match the ATU requirements (Christian
Bruel)

Synopsys DesignWare PCIe controller driver:

- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)

- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)

- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)

TI Keystone PCIe controller driver:

- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)

- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"

* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...

show more ...

Merge branch 'pci/controller/sky1'

- Add module support for platform controller driver (Manikandan K Pillai)

- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)

- Add

Merge branch 'pci/controller/sky1'

- Add module support for platform controller driver (Manikandan K Pillai)

- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)

- Add DT binding and driver for CIX Sky1 (Hans Zhang)

* pci/controller/sky1:
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
PCI: cadence: Move PCIe RP common functions to a separate file
PCI: cadence: Split PCIe controller header file
PCI: cadence: Add module support for platform controller driver

show more ...

PCI: sky1: Add PCIe host support for CIX Sky1

Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based on the
Cadence High Performance Architecture (HPA) PCIe core.

The controller support

PCI: sky1: Add PCIe host support for CIX Sky1

Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based on the
Cadence High Performance Architecture (HPA) PCIe core.

The controller supports MSI/MSI-X via GICv3, Single Virtual Channel, and
Single Function.

Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
[mani: moved the PCI ID definitions and squashed Kconfig change]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: sort Kconfig menu entry, squash
https://lore.kernel.org/r/aSBqp0cglr-Sc8na@stanley.mountain]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-8-hans.zhang@cixtech.com

show more ...

Merge branch 'for-6.19/nintendo' into for-linus

- switch to WQ_PERCPU workaueues (Marco Crivellari)
- reduce potential initialization blocking time of hid-nintendo (Willy Huang)

PCI: cadence: Add module support for platform controller driver

Add support for building PCI cadence platforms as a module.

Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: M

PCI: cadence: Add module support for platform controller driver

Add support for building PCI cadence platforms as a module.

Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251108140305.1120117-2-hans.zhang@cixtech.com

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>