Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Don't try to enable Extended Tags on VFs since that bi

Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)

- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)

- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)

Resource management:

- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)

- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)

- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)

- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)

- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)

- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)

Driver binding:

- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)

- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)

- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)

Error handling:

- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)

- Add generic RAS tracepoint for hotplug events (Shuai Xue)

- Add RAS tracepoint for link speed changes (Shuai Xue)

Power management:

- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)

- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)

Power control:

- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)

- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)

- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)

- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)

Virtualization:

- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)

- Lock the bridge device for slot reset (Keith Busch)

- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)

- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)

Peer-to-peer DMA:

- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)

- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)

Endpoint framework:

- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)

- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)

ASPEED PCIe controller driver:

- Add ASPEED Root Complex DT binding and driver (Jacky Chou)

Freescale i.MX6 PCIe controller driver:

- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)

- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)

NVIDIA Tegra PCIe controller driver:

- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)

- Allow pci-tegra to be built as a module (Aaron Kling)

NVIDIA Tegra194 PCIe controller driver:

- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)

Qualcomm PCIe controller driver:

- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)

- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)

- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)

- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)

Renesas RZ/G3S PCIe controller driver:

- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)

SOPHGO PCIe controller driver:

- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)

Synopsys DesignWare PCIe controller driver:

- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)

- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)

- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)

- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)

- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)

- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)

- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)

- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)

- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)

- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)

- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)

- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)

- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)

- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)

- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)

Miscellaneous:

- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"

* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...

show more ...

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge branch 'pci/controller/aspeed'

- Add ASPEED Root Complex DT binding and driver (Jacky Chou)

* pci/controller/aspeed:
MAINTAINERS: Add ASPEED PCIe RC driver
PCI: aspeed: Add ASPEED PCIe RC

Merge branch 'pci/controller/aspeed'

- Add ASPEED Root Complex DT binding and driver (Jacky Chou)

* pci/controller/aspeed:
MAINTAINERS: Add ASPEED PCIe RC driver
PCI: aspeed: Add ASPEED PCIe RC driver
PCI: Add FMT, TYPE and CPL status definition for TLP header
dt-bindings: PCI: Add ASPEED PCIe RC support

show more ...

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

PCI: aspeed: Add ASPEED PCIe RC driver

Introduce PCIe Root Complex driver for ASPEED SoCs. Support RC
initialization, reset, clock, IRQ domain, and MSI domain setup. Implement
platform-specific setu

PCI: aspeed: Add ASPEED PCIe RC driver

Introduce PCIe Root Complex driver for ASPEED SoCs. Support RC
initialization, reset, clock, IRQ domain, and MSI domain setup. Implement
platform-specific setup and register configuration for ASPEED. And provide
PCI config space read/write and INTx/MSI interrupt handling.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251216-upstream_pcie_rc-v7-6-4aeb0f53c4ce@aspeedtech.com

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Enable host bridge emulation for PCI_DOMAINS_GENERIC

Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)

- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)

- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)

Resource management:

- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)

- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)

- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)

- Move Resizable BAR code to rebar.c (Ilpo Järvinen)

- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)

- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)

Power management and error handling:

- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)

- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)

- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)

- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)

- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)

Power control:

- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)

- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)

Endpoint framework:

- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)

- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)

New native PCIe controller drivers:

- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)

- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)

- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)

- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)

Amlogic Meson PCIe controller driver:

- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)

Apple PCIe controller driver:

- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)

Broadcom STB PCIe controller driver:

- Disable advertising ASPM L0s support correctly (Jim Quinlan)

- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)

Cadence PCIe controller driver:

- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)

- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)

MediaTek PCIe controller driver:

- Convert DT binding to YAML schema (Christian Marangi)

- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)

Qualcomm PCIe controller driver:

- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)

- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)

- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)

Rockchip DesignWare PCIe controller driver:

- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)

STMicroelectronics STM32MP25 PCIe controller driver:

- Fix a race between link training and endpoint register
initialization (Christian Bruel)

- Align endpoint allocations to match the ATU requirements (Christian
Bruel)

Synopsys DesignWare PCIe controller driver:

- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)

- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)

- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)

TI Keystone PCIe controller driver:

- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)

- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"

* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...

show more ...

Merge branch 'pci/controller/rzg3s-host'

- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea)

* pci/controller/rzg3s-host:
PCI: Add Renesas RZ/G3S host controller driver

Merge branch 'pci/controller/rzg3s-host'

- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea)

* pci/controller/rzg3s-host:
PCI: Add Renesas RZ/G3S host controller driver
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding

show more ...

PCI: Add Renesas RZ/G3S host controller driver

The Renesas RZ/G3S features a PCIe IP that complies with the PCI Express
Base Specification 4.0 and supports speeds of up to 5 GT/s. It functions
only

PCI: Add Renesas RZ/G3S host controller driver

The Renesas RZ/G3S features a PCIe IP that complies with the PCI Express
Base Specification 4.0 and supports speeds of up to 5 GT/s. It functions
only as a root complex, with a single-lane (x1) configuration. The
controller includes Type 1 configuration registers, as well as IP
specific registers (called AXI registers) required for various adjustments.

Hardware manual can be downloaded from the address in the "Link" section.
The following steps should be followed to access the manual:
1/ Click the "User Manual" button
2/ Click "Confirm"; this will start downloading an archive
3/ Open the downloaded archive
4/ Navigate to r01uh1014ej*-rzg3s-users-manual-hardware -> Deliverables
5/ Open the file r01uh1014ej*-rzg3s.pdf

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://www.renesas.com/en/products/rz-g3s?queryID=695cc067c2d89e3f271d43656ede4d12
Link: https://patch.msgid.link/20251119143523.977085-3-claudiu.beznea.uj@bp.renesas.com

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>