Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regres

Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.

Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.

Core & protocols:

- Support Device Memory TCP, ability to zero-copy receive TCP
payloads to a DMABUF region of memory while packet headers land
separately in normal kernel buffers, and TCP processes then as
usual.

- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.

- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which is
a narrower interpretation of the same header field.

- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.

- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.

- IPv6 IOAM6 support for new tunsrc encap mode for better
performance.

- Detect destinations which blackhole MPTCP traffic and avoid
initiating MPTCP connections to them for a certain period of time,
1h by default.

- Improve IPsec control path performance by removing the inexact
policies list.

- AF_VSOCK: add support for SIOCOUTQ ioctl.

- Add enum for reasons TCP reset was sent for easier tracing.

- Add SMC ringbufs usage statistics.

Drivers:

- Handle netconsole setup failures more gracefully, don't fail
loading, retain the specified target as disabled.

- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).

Filtering:

- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.

- Support using BPF skb helpers in tracepoints.

- Conntrack Netlink: support CTA_FILTER for flush.

- Improve SCTP support in nfnetlink_queue.

- Improve performance of large nftables flush transactions.

Things we sprinkled into general kernel code:

- selftests: support setting an "interpreter" for script files; make
it easy to run as separate cases tests where one "interpreter" is
fed various test descriptions (in our case packet sequences).

Driver API:

- Extend core and ethtool APIs to support many PHYs connected to a
single interface (PHY topologies).

- Extend cable diagnostics to specify whether Time Domain
Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
used.

- Add library for implementing MAC-PHY Ethernet drivers for SPI
devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
Interface (TC6) standard.

- Add helpers to the PHY framework, for PHYs following the Open
Alliance standards:
- 1000BaseT1 link settings
- cable test and diagnostics

- Support listing / dumping all allocated RSS contexts.

- Add configuration for frequency Embedded SYNC in DPLL, which
magically embeds sync pulses into Ethernet signaling.

Device drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics

- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a
lower virtio-net to propagate the link status to an upper
device like macvlan

- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054,
RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink

- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver

- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets

- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3

- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers"

* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
ice: Fix a NULL vs IS_ERR() check in probe()
ice: Fix a couple NULL vs IS_ERR() bugs
net: ethernet: fs_enet: Make the per clock optional
net: ti: icssg-prueth: Add multicast filtering support in HSR mode
net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
net: ti: icssg-prueth: Add support for HSR frame forward offload
net: ti: icssg-prueth: Stop hardcoding def_inc
net: ti: icss-iep: Move icss_iep structure
net: ibm: emac: get rid of wol_irq
net: ibm: emac: remove all waiting code
net: ibm: emac: replace of_get_property
net: ibm: emac: use netdev's phydev directly
net: ibm: emac: use devm for register_netdev
net: ibm: emac: remove mii_bus with devm
net: ibm: emac: use devm for of_iomap
net: ibm: emac: manage emac_irq with devm
net: ibm: emac: use devm for alloc_etherdev
octeontx2-af: debugfs: Add Channel info to RPM map
...

show more ...

Merge tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.12

The last -next "n

Merge tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.12

The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.

Major changes:

cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO

rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support

* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================

Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

wifi: cfg80211: handle DFS per link

Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Ope

wifi: cfg80211: handle DFS per link

Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.

Add changes to first parse and then pass link id in the start radar
detection path.

Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.

However, everything is handled at link 0 only until all API's are ready to
handle it per link.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: move DFS related members to links[] in wireless_dev

A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS wit

wifi: cfg80211: move DFS related members to links[] in wireless_dev

A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.

Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.

Since currently, link ID is not known at all places, use default value of
0 for now.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/sound-devel-6.10' into for-next

Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A relatively large set of fixes here, the biggest piece of it is a

Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get drm-misc-fixes to the state of v6.9-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Backmerge to bring Xe driver to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Large effort by Eric to lower rtnl_lo

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Large effort by Eric to lower rtnl_lock pressure and remove locks:

- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.

- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.

- Remove locks / serialization in the socket diag interface.

- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

- Remove the dev_base_lock, depend on RCU where necessary.

- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.

- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.

- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.

- Support TCP_NOTSENT_LOWAT in MPTCP.

- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.

- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.

- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.

- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.

- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).

- Speed up scanning for expired routes by keeping a dedicated list.

- Speed up "generic" XDP by trying harder to avoid large allocations.

- Support attaching arbitrary metadata to netconsole messages.

Things we sprinkled into general kernel code:

- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).

- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).

Netfilter:

- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.

- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.

BPF:

- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.

- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.

- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.

- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.

- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.

- Add support for retrieval of cookies for perf/kprobe multi links.

- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.

- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.

Wireless:

- Add SPP (signaling and payload protected) AMSDU support.

- Support wider bandwidth OFDMA, as required for EHT operation.

Driver API:

- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.

- Define an API for querying per netdev queue statistics from
drivers.

- IPSec: account in global stats for fully offloaded sessions.

- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.

- Enable Rx hashing (RSS) on GTP protocol fields.

Misc:

- Improvements and refactoring all over networking selftests.

- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.

- Address all missing MODULE_DESCRIPTION() warnings in networking.

- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".

Drivers:

- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues

- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support

- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch

- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.

- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx

- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...

show more ...

Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The second "new fe

Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.

We also twice merged wireless into wireless-next to avoid conflicts
between the trees.

Major changes:

stack

* mac80211: negotiated TTLM request support

* SPP A-MSDU support

* mac80211: wider bandwidth OFDMA config support

iwlwifi

* kunit tests

* bump FW API to 89 for AX/BZ/SC devices

* enable SPP A-MSDUs

* support for new devices

ath12k

* refactoring in preparation for Multi-Link Operation (MLO) support

* 1024 Block Ack window size support

* provide firmware wmi logs via a trace event

ath11k

* 36 bit DMA mask support

* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)

rtl8xxxu

* TP-Link TL-WN823N V2 support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

wifi: cfg80211/mac80211: move puncturing into chandef

Aloka originally suggested that puncturing should be part of
the chandef, so that it's treated correctly. At the time, I
disagreed and it ended

wifi: cfg80211/mac80211: move puncturing into chandef

Aloka originally suggested that puncturing should be part of
the chandef, so that it's treated correctly. At the time, I
disagreed and it ended up not part of the chandef, but I've
now realized that this was wrong. Even for clients, the RX,
and perhaps more importantly, CCA configuration needs to take
puncturing into account.

Move puncturing into the chandef, and adjust all the code
accordingly. Also add a few tests for puncturing in chandef
compatibility checking.

Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/
Suggested-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>