Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing l

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing layer with a lockless list.

Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.

- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.

Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.

Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.

- Optimize the NAPI skb cache, make it larger, use it in more paths.

- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).

- Various data structure layout and prefetch optimizations from Eric.

- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.

- Extend threaded NAPI polling to allow the kthread busy poll for
packets.

- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.

- Support memcg accounting of MPTCP socket memory.

- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.

- Improve heuristics for when to kick off AF_UNIX garbage collection.

- Allow users to control TCP SACK compression, and default to 33% of
RTT.

- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.

- Preserve skb metadata space across skb_push / skb_pull operations.

- Support for IPIP encapsulation in the nftables flowtable offload.

- Support appending IP interface information to ICMP messages (RFC
5837).

- Support setting max record size in TLS (RFC 8449).

- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

- Let users configure the number of write buffers in SMC.

- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.

- Some conversions away from the crypto_ahash API, from Eric Biggers.

- Some preparations for slimming down struct page.

- YAML Netlink protocol spec for WireGuard.

- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.

Driver API:

- Add CAN XL support to the CAN Netlink interface.

- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.

- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).

- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.

- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.

- Add standard device stats for PSP crypto offload.

- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.

- Add uAPI defines for 1.6Tbps link modes.

Device drivers:

- Add Motorcomm YT921x gigabit Ethernet switch support.

- Add MUCSE driver for N500/N210 1GbE NIC series.

- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.

- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.

- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules

- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device

- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices

- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control

- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality

- Bluetooth:
- add initial support for PASTa

- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements

- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...

show more ...

Merge tag 'wireguard-6.19-rc1-for-jakub' of https://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/wireguard-linux

Jason A. Donenfeld says:

====================
WireGuard updates for Linux 6.19-rc1.

Merge tag 'wireguard-6.19-rc1-for-jakub' of https://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/wireguard-linux

Jason A. Donenfeld says:

====================
WireGuard updates for Linux 6.19-rc1.

Please find here Asbjørn's ynl series. This has been sitting in my
testing for the last week or so, since he sent out the latest series.
I've dropped the yml sample code, as he found an issue in that last
minute, but otherwise, we've sat on this code for long enough, so
let's see how it goes.

* tag 'wireguard-6.19-rc1-for-jakub' of https://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/wireguard-linux:
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
wireguard: netlink: lower .maxattr for WG_CMD_GET_DEVICE
wireguard: netlink: convert to split ops
wireguard: netlink: use WG_KEY_LEN in policies
wireguard: netlink: validate nested arrays in policy
wireguard: netlink: enable strict genetlink validation
====================

Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

wireguard: netlink: generate netlink code

This patch adopts netlink policies and command definitions
generated by ynl-gen, thus completing the conversion to YNL.

Given that the old and new policies

wireguard: netlink: generate netlink code

This patch adopts netlink policies and command definitions
generated by ynl-gen, thus completing the conversion to YNL.

Given that the old and new policies are functionally identical
and have just been moved to a new file, it serves to verify
that the policies generated from the spec are identical to the
previous policy code.

The following functions are renamed:
wg_get_device_dump() -> wg_get_device_dumpit()
wg_set_device() -> wg_set_device_doit()

The new files are covered by the existing drivers/net/wireguard/
pattern in MAINTAINERS.

No behavioural changes intended.

Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

show more ...