Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases f

Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.

It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.

Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.

We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.

The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...

Core & protocols:

- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET

- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)

- Support buffers larger than PAGE_SIZE in devmem zero-copy API

- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned

- Report the per-group user count via RTM_GETMULTICAST

- Expose the route deletion reason in RTM_DELROUTE

- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot

- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table

- Support PRP RedBox (interlink) creation

- Support per-nexthop UDP dst port in VXLAN

- Continue converting getsockopt callbacks in a number of protocols
to iov_iter

Ethernet:

- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)

- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers

- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers

- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation

- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S

- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D

Wireless:

- nl80211: per-link statistics support for multi-link operation

- mac80211: AQL/airtime-fairness support for multicast

- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)

- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)

- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support

Bluetooth:

- HCI: add support for Shorter Connection Interval (SCI) feature

- af_bluetooth: add minimal context analysis annotations

- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq

Misc:

- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)

- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)

- Power-over-Ethernet: support Realtek PSE controllers

- Remove the IBM EHEA driver

- Remove tulip/xircom_cb driver"

* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...

show more ...

Merge branch 'net-pse-pd-add-realtek-pse-mcu-support'

Jonas Jelonek says:

====================
net: pse-pd: add Realtek PSE MCU support

This series adds a PSE-PD driver for the microcontroller (MC

Merge branch 'net-pse-pd-add-realtek-pse-mcu-support'

Jonas Jelonek says:

====================
net: pse-pd: add Realtek PSE MCU support

This series adds a PSE-PD driver for the microcontroller (MCU) that
fronts the PSE silicon on a range of managed switches, together with its
DT binding.

Hardware model
==============

These boards do not expose the PSE chips to the host directly. A small
microcontroller sits on an I2C/SMBus or UART bus and manages one or more
PSE chips behind it; the host CPU only ever talks to that MCU, using a
fixed 12-byte request/response protocol with a trailing checksum. The
PSE silicon never appears on the bus.

Two generations of the protocol exist, both Realtek's: an older one on
boards with Broadcom PSE silicon (BCM59111, BCM59121) and a newer one
used with Realtek's own PSE silicon (RTL8238B, RTL8239, RTL8239C). They
diverge in opcode numbering and a few response layouts; the driver
abstracts that behind a per-dialect opcode table and parser hooks,
selected by the compatible. The specific PSE chip behind the MCU is
detected at runtime and only influences per-chip constants (power scaling
and the per-port cap).

The compatibles
===============

The protocol compatibles name two generations of the Realtek protocol,
with the I2C framing folded in:

realtek,pse-mcu-gen1 gen1, UART
realtek,pse-mcu-gen1-smbus gen1, I2C/SMBus
realtek,pse-mcu-gen2 gen2, UART
realtek,pse-mcu-gen2-smbus gen2, I2C/SMBus
realtek,pse-mcu-gen2-i2c gen2, raw I2C

and each board carries a device-specific compatible that falls back to one
of these, e.g.

compatible = "zyxel,xs1930-12hp-pse", "realtek,pse-mcu-gen2-smbus";

The naming is the part most likely to raise questions, so the reasoning up
front (the binding documents it too):

- The node describes the MCU together with its Realtek firmware, not a
PSE chip and not the microcontroller silicon. The PSE chips sit behind
the MCU, never appear on the bus, and are reported by the MCU and
detected at runtime; the microcontroller itself is a general-purpose
part (GigaDevice, Nuvoton, ...) that varies across boards. What is
fixed and Realtek's is the firmware and its host protocol - hence the
'realtek' prefix.

- gen1 and gen2 are two generations of that protocol, both Realtek's:
gen1 on older boards fronting Broadcom PSE silicon, gen2 the altered
protocol used once Realtek shipped their own PSE silicon. The
generation is fixed per board and is all the driver needs at DT-parse
time, so the compatible encodes it.

- On I2C the MCU firmware expects one of two framings - SMBus or raw
I2C - which is a genuine programming-model difference, so it is part
of the compatible ('-smbus' / '-i2c'). A UART attachment carries no
framing suffix; the transport is given structurally by the parent
'serial' node.

- Each board additionally carries a device-specific compatible that
falls back to the protocol one. The driver only ever binds on the
protocol compatible; the device-specific string keeps the binding
specific and reserves a place for a future per-board quirk without
having to retrofit device trees already deployed in the field.

Testing
=======

- Linksys LGS328MPCv2 (RTL8238B, I2C)
- Zyxel GS1900-10HP A1 (BCM59121, UART)
- Zyxel GS1900-10HP B1 (RTL8238B, UART)
- Zyxel GS1920-24HPv2 (BCM59121, SMBus)
- Zyxel XMG1915-10EP (RTL8239C, UART)
- Zyxel XS1930-12HP (RTL8239, SMBus)
====================

Link: https://patch.msgid.link/20260813222036.873930-1-jelonek.jonas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: pse-pd: realtek-pse-mcu: add UART transport

Add the serdev (UART) transport for the Realtek PSE MCU core. It registers
the MCU as a serdev device and provides the send/recv callbacks the core
u

net: pse-pd: realtek-pse-mcu: add UART transport

Add the serdev (UART) transport for the Realtek PSE MCU core. It registers
the MCU as a serdev device and provides the send/recv callbacks the core
uses to exchange the 12-byte frames, receiving asynchronously via the
serdev receive_buf callback.

The baud rate defaults to 19200 and can be overridden per board with the
"current-speed" property.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260813222036.873930-5-jelonek.jonas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: pse-pd: realtek-pse-mcu: add I2C transport

Add the I2C/SMBus transport for the Realtek PSE MCU core. It registers
the MCU on an I2C bus and provides the send/recv callbacks the core
uses to exc

net: pse-pd: realtek-pse-mcu: add I2C transport

Add the I2C/SMBus transport for the Realtek PSE MCU core. It registers
the MCU on an I2C bus and provides the send/recv callbacks the core
uses to exchange the 12-byte frames.

The MCU firmware expects one of two framings on the I2C bus, and which one
is part of the compatible: '-smbus' (reads carry a leading command byte
and a repeated start) or raw '-i2c' (bare block writes and reads). The
match data flags the raw-I2C case; SMBus is the default because that's
what the majority of devices uses.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260813222036.873930-4-jelonek.jonas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: pse-pd: add Realtek PSE MCU core

A range of managed Realtek-based PoE switches use a small microcontroller
on the PCB to front the actual PSE silicon. The host CPU talks to that
MCU over I2C/SM

net: pse-pd: add Realtek PSE MCU core

A range of managed Realtek-based PoE switches use a small microcontroller
on the PCB to front the actual PSE silicon. The host CPU talks to that
MCU over I2C/SMBus or UART using a fixed 12-byte request/response
protocol with a trailing checksum; the PSE chips are managed by the MCU
and are not accessed directly. Two generations of the protocol exist -
both Realtek's - diverging in opcode numbering and a few response
layouts; the driver handles this with a per-dialect opcode table and
parser hooks for the responses that differ, selected by the compatible.
The specific PSE chip behind the MCU is detected at runtime and only
influences per-chip constants (power scaling and the per-port cap).

This core module implements the protocol, message framing, the dialect
machinery and the pse_controller_ops glue, and exports a registration
helper for transport modules. The I2C and UART transports that drive it
follow in the next patches; the core (PSE_REALTEK_MCU) is selected
automatically by those transports and is not user-selectable on its own.

The realtek-pse-mcu-* files and PSE_REALTEK_MCU* symbols match the
realtek,pse-mcu-* compatibles (see the binding for the naming rationale).
The two protocol generations - gen1 on older Broadcom-PSE boards, gen2 on
Realtek's own PSE silicon - are both Realtek's, handled by the same shared
core, each selecting its dialect via the compatible.

Power budgeting is left to the MCU firmware; the driver advertises
PSE_BUDGET_EVAL_STRAT_DYNAMIC accordingly.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://patch.msgid.link/20260813222036.873930-3-jelonek.jonas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- Improve drop account scalability on NUM

Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS

- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions

- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities

- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)

- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath

- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW

- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds

- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete

- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches

- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios

- Improve netfilter matching performance on large sets

- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes

- Allow bridges to redirect to a backup port when the bridge port is
administratively down

- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups

- Add RCU safety to dst->dev, closing a lot of possible races

- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication

- Supports pulling data from an skb frag into the linear area of an
XDP buffer

Things we sprinkled into general kernel code:

- Generate netlink documentation from YAML using an integrated YAML
parser

Driver API:

- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection

- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups

- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath

- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration

- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause

- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor

Device drivers:

- Add a new Huawei driver for 3rd gen NIC (hinic3)

- Add a new SpacemiT driver for K1 ethernet MAC

- Add a generic abstraction for shared memory communication
devices (dibps)

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts

- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency

- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups

- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115

- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling

- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support

- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes

- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"

* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...

show more ...

Merge branch 'add-si3474-pse-controller-driver'

Piotr Kubik says:

====================
Add Si3474 PSE controller driver

From: Piotr Kubik <piotr.kubik@adtran.com>

These patch series provide suppo

Merge branch 'add-si3474-pse-controller-driver'

Piotr Kubik says:

====================
Add Si3474 PSE controller driver

From: Piotr Kubik <piotr.kubik@adtran.com>

These patch series provide support for Skyworks Si3474 I2C Power
Sourcing Equipment controller.

Based on the TPS23881 driver code.

Supported features of Si3474:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power

Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
====================

Link: https://patch.msgid.link/6af537dc-8a52-4710-8a18-dcfbb911cf23@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: pse-pd: Add Si3474 PSE controller driver

Add a driver for the Skyworks Si3474 I2C Power Sourcing Equipment
controller.

Driver supports basic features of Si3474 IC:
- get port status,
- get por

net: pse-pd: Add Si3474 PSE controller driver

Add a driver for the Skyworks Si3474 I2C Power Sourcing Equipment
controller.

Driver supports basic features of Si3474 IC:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power.

Only 4p configurations are supported at this moment.

Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/9b72c8cd-c8d3-4053-9c80-671b9481d166@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>