Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- A significant effort all around the stac

Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.

This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.

- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.

- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.

- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.

- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.

- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.

- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.

- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.

- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.

- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

- Reduce tcp socket size by one cache line.

- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.

- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.

- Improve xsk generic performances with cache-alignment-oriented
optimizations.

- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.

Driver API:

- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.

- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.

- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.

- Add helper to create, prepare and enable managed clocks.

Device drivers:

- Add Huawei hinic3 PF etherner driver.

- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.

- Add ethernet driver for MaxLinear MxL862xx switches

- Remove parallel-port Ethernet driver.

- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().

- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.

- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors

- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation

- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC

- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework

- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema

- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust

- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling

- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211

- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support

- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections

- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...

show more ...

Merge branch 'phy-polarity-inversion-via-generic-device-tree-properties'

Vladimir Oltean says:

====================
PHY polarity inversion via generic device tree properties

Using the "rx-polarity

Merge branch 'phy-polarity-inversion-via-generic-device-tree-properties'

Vladimir Oltean says:

====================
PHY polarity inversion via generic device tree properties

Using the "rx-polarity" and "tx-polarity" device tree properties
introduced in linux-phy and merged into net-next in
commit 96a2d53f2478 ("Merge tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy")
we convert here two existing networking use cases - the EN8811H Ethernet
PHY and the Mediatek LynxI PCS.

Original cover letter:

Polarity inversion (described in patch 4/10) is a feature with at least
4 potential new users waiting for a generic description:
- Horatiu Vultur with the lan966x SerDes
- Daniel Golle with the MaxLinear GSW1xx switches
- Bjørn Mork with the AN8811HB Ethernet PHY
- Me with a custom SJA1105 board, switch which uses the DesignWare XPCS

I became interested in exploring the problem space because I was averse
to the idea of adding vendor-specific device tree properties to describe
a common need.

This set contains an implementation of a generic feature that should
cater to all known needs that were identified during my documentation
phase.

Apart from what is converted here, we also have the following, which I
did not touch:
- "st,px_rx_pol_inv" - its binding is a .txt file and I don't have time
for such a large detour to convert it to dtschema.
- "st,pcie-tx-pol-inv" and "st,sata-tx-pol-inv" - these are defined in a
.txt schema but are not implemented in any driver. My verdict would be
"delete the properties" but again, I would prefer not introducing such
dependency to this series.
====================

Link: https://patch.msgid.link/20260119091220.1493761-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: pcs: pcs-mtk-lynxi: deprecate "mediatek,pnswap"

Prefer the new "rx-polarity" and "tx-polarity" properties, which in this
case have the advantage that polarity inversion can be specified per
dir

net: pcs: pcs-mtk-lynxi: deprecate "mediatek,pnswap"

Prefer the new "rx-polarity" and "tx-polarity" properties, which in this
case have the advantage that polarity inversion can be specified per
direction (and per protocol, although this isn't useful here).

We use the vendor specific ones as fallback if the standard description
doesn't exist.

Daniel, referring to the Mediatek SDK, clarifies that the combined
SGMII_PN_SWAP_TX_RX register field should be split like this: bit 0 is
TX and bit 1 is RX:
https://lore.kernel.org/linux-phy/aSW--slbJWpXK0nv@makrotopia.org/

Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- Improve drop account scalability on NUM

Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core & protocols:

- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS

- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions

- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities

- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)

- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath

- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW

- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds

- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete

- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches

- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios

- Improve netfilter matching performance on large sets

- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes

- Allow bridges to redirect to a backup port when the bridge port is
administratively down

- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups

- Add RCU safety to dst->dev, closing a lot of possible races

- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication

- Supports pulling data from an skb frag into the linear area of an
XDP buffer

Things we sprinkled into general kernel code:

- Generate netlink documentation from YAML using an integrated YAML
parser

Driver API:

- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection

- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups

- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath

- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration

- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause

- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor

Device drivers:

- Add a new Huawei driver for 3rd gen NIC (hinic3)

- Add a new SpacemiT driver for K1 ethernet MAC

- Add a generic abstraction for shared memory communication
devices (dibps)

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts

- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency

- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups

- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115

- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling

- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support

- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes

- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"

* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...

show more ...

net: pcs: Kconfig: Fix unmet dependency warning

Fix the Kconfig dependencies for PCS_RZN1_MIIC to avoid the unmet direct
dependency warning when enabling DWMAC_RENESAS_GBETH. The PCS driver is
used

net: pcs: Kconfig: Fix unmet dependency warning

Fix the Kconfig dependencies for PCS_RZN1_MIIC to avoid the unmet direct
dependency warning when enabling DWMAC_RENESAS_GBETH. The PCS driver is
used on multiple Renesas SoCs including RZ/N1, RZ/N2H and RZ/T2H, but the
existing condition only allowed ARCH_RZN1, ARCH_R9A09G077, or
ARCH_R9A09G087. This conflicted with the GBETH/GMAC driver which selects
PCS_RZN1_MIIC under ARCH_RENESAS.

Update the dependency to ARCH_RENESAS || COMPILE_TEST so that the PCS
driver is available on all Renesas platforms.

Fixes: 08f89e42121d ("net: pcs: rzn1-miic: Add RZ/T2H MIIC support")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/aMlgg_QpJOEDGcEA@monster/
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250916162335.3339558-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge branch 'add-pcs-support-for-renesas-rz-t2h-n2h-socs'

Lad Prabhakar says:

====================
Add PCS support for Renesas RZ/{T2H,N2H} SoCs

This series aims to add PCS support for the Renesa

Merge branch 'add-pcs-support-for-renesas-rz-t2h-n2h-socs'

Lad Prabhakar says:

====================
Add PCS support for Renesas RZ/{T2H,N2H} SoCs

This series aims to add PCS support for the Renesas RZ/T2H and RZ/N2H SoCs
These SoCs include a MII converter (MIIC) that converts MII to RMII/RGMII
or can be set in pass-through mode for MII similar to the RZ/N1 SoC. The
MIIC is used in conjunction with the Ethernet switch (ETHSW) available on
these SoCs.
====================

Link: https://patch.msgid.link/20250910204132.319975-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: pcs: rzn1-miic: Add RZ/T2H MIIC support

Add support for the Renesas RZ/T2H MIIC by defining SoC-specific
modctrl match tables, register map, and string representations
for converters and ports.

net: pcs: rzn1-miic: Add RZ/T2H MIIC support

Add support for the Renesas RZ/T2H MIIC by defining SoC-specific
modctrl match tables, register map, and string representations
for converters and ports.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250910204132.319975-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...