Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signe

Merge branch 'topic/ctl-enhancements' into for-next

Pull ALSA control enhancement patches.
One is the faster lookup of control elements, and another is to
introduce the input data validation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAIN

Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.19, take #1

- Typo fix in arch/riscv/kvm/vmid.c

- Remove broken reference pattern from MAINTAINERS entry

show more ...

Merge v5.19-rc1 into drm-misc-fixes

Let's kick-off the start of the 5.19 fix cycle

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.19-rc1' into asoc-5.19

Linux 5.19-rc1

Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core
----

- Support TCPv6 segmentation offload with su

Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core
----

- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).

- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.

- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).

- Continue work annotating skb drop reasons.

- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.

- Add VLAN support for AF_PACKET SOCK_RAW GSO.

- Allow receiving skb mark from the socket as a cmsg.

- Enable memcg accounting for veth queues, sysctl tables and IPv6.

BPF
---

- Add libbpf support for User Statically-Defined Tracing (USDTs).

- Speed up symbol resolution for kprobes multi-link attachments.

- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.

- Add support for BPF link iterator.

- Introduce access to remote CPU map elements in BPF per-cpu map.

- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.

- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.

Protocols
---------

- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).

- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.

- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.

- Support for MPTCP path manager in user space.

- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).

- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.

- Support lockless operation of GRE tunnels with seq numbers enabled.

- WiFi support for host based BSS color collision detection.

- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.

- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).

- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).

- Allow matching on the number of VLAN tags via tc-flower.

- Add tracepoint for tcp_set_ca_state().

Driver API
----------

- Improve error reporting from classifier and action offload.

- Add support for listing line cards in switches (devlink).

- Add helpers for reporting page pool statistics with ethtool -S.

- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.

- Support configuring low-latency Tx descriptor push via ethtool.

- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.

New hardware / drivers
----------------------

- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)

- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs

- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)

- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)

- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague

Drivers
-------

- Delete a number of old drivers still using virt_to_bus().

- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI

- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress

- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention

- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support

- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support

- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"

* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...

show more ...

Merge branch 'move-siena-into-a-separate-subdirectory'

Martin Habets says:

====================
Move Siena into a separate subdirectory

The Siena NICs (SFN5000 and SFN6000 series) went EOL in Nove

Merge branch 'move-siena-into-a-separate-subdirectory'

Martin Habets says:

====================
Move Siena into a separate subdirectory

The Siena NICs (SFN5000 and SFN6000 series) went EOL in November 2021.
Most of these adapters have been remove from our test labs, and testing
has been reduced to a minimum.

This patch series creates a separate kernel module for the Siena architecture,
analogous to what was done for Falcon some years ago.
This reduces our maintenance for the sfc.ko module, and allows us to
enhance the EF10 and EF100 drivers without the risk of breaking Siena NICs.

After this series further enhancements are needed to differentiate the
new kernel module from sfc.ko, and the Siena code can be removed from sfc.ko.
Thes will be posted as a small follow-up series.
The Siena module is not built by default, but can be enabled
using Kconfig option SFC_SIENA. This will create module sfc-siena.ko.

Patches

Patches 1-3 establish the code base for the Siena driver.
Patches 4-10 ensure the allyesconfig build succeeds.
Patch 11 adds the basic Siena module.

I do not expect patch 1 through 3 to be reviewed, they are FYI only.
No checkpatch issues were resolved as part of these, but they
were fixed in the subsequent patches.

Testing

Various build tests were done such as allyesconfig, W=1 and sparse.
The new sfc-siena.ko and sfc.ko modules were tested on a machine with both
these NICs in them, and several tests were run on both drivers.
====================

Link: https://lore.kernel.org/r/165211018297.5289.9658523545298485394.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

sfc/siena: Rename functions in nic_common.h to avoid conflicts with sfc

For siena use efx_siena_ as the function prefix.
efx_nic_update_stats_atomic is only used in efx_common.c, so move
it there.
e

sfc/siena: Rename functions in nic_common.h to avoid conflicts with sfc

For siena use efx_siena_ as the function prefix.
efx_nic_update_stats_atomic is only used in efx_common.c, so move
it there.
efx_nic_copy_stats is not used in Siena, so it is removed.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

sfc/siena: Rename functions in mcdi headers to avoid conflicts with sfc

For siena use efx_siena_ as the function prefix.
Several functions are not used in Siena, so they are removed.

Signed-off-by:

sfc/siena: Rename functions in mcdi headers to avoid conflicts with sfc

For siena use efx_siena_ as the function prefix.
Several functions are not used in Siena, so they are removed.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

sfc/siena: Rename functions in efx headers to avoid conflicts with sfc

When building with allyesconfig there are many identical
symbol names.
For siena use efx_siena_ as the function and variable pr

sfc/siena: Rename functions in efx headers to avoid conflicts with sfc

When building with allyesconfig there are many identical
symbol names.
For siena use efx_siena_ as the function and variable prefix
to avoid build errors.

efx_mtd_remove_partition can become static as it is no longer called
from other files.
efx_ticks_to_usecs and efx_xmit_done_single are not used in Siena, so
they are removed.
Several functions are only used inside efx_channels.c for Siena so
they can become static.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

sfc/siena: Remove build references to missing functionality

Functionality not supported or needed on Siena includes:
- Anything for EF100
- EF10 specifics such as register access, PIO and TSO offloa

sfc/siena: Remove build references to missing functionality

Functionality not supported or needed on Siena includes:
- Anything for EF100
- EF10 specifics such as register access, PIO and TSO offload.
Also only bind to Siena NICs.

Remove EF10 specifics from nic.h.
The functions that start with efx_farch_ will be removed from sfc.ko
with a subsequent patch.
Add the efx_ prefix to siena_prepare_flush() to make it consistent
with the other APIs.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

sfc: Move Siena specific files

Files are only moved, no changes are made.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>