Merge tag 'nand/for-6.14' into mtd/next

* Raw NAND changes

A new controller driver, from Nuvoton, has been merged.

Bastien Curutchet has contributed a series improving the Davinci
controller drive

Merge tag 'nand/for-6.14' into mtd/next

* Raw NAND changes

A new controller driver, from Nuvoton, has been merged.

Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.

The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.

Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.

* SPI NAND changes

The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.

A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.

A Foresee device is also now supported.

show more ...

Merge tag 'spi-mem-dtr-2' into nand/next

spi: Support DTR in spi-mem

Changes to support DTR with spi-mem.

ASoC: Merge up v6.13-rc6

This helps several of my boards in CI.

Merge branch 'for-linus' into for-next

Pull 6.13 devel branch for further development of sequencer stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To get the fixes that went thru perf-tools for v6.13.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR.

No conflicts.

Adjacent changes in:
Auto-merging include/linux/bpf.h
Auto-merging include/linu

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR.

No conflicts.

Adjacent changes in:
Auto-merging include/linux/bpf.h
Auto-merging include/linux/bpf_verifier.h
Auto-merging kernel/bpf/btf.c
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/trace/bpf_trace.c
Auto-merging tools/testing/selftests/bpf/progs/test_tp_btf_nullable.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.

Core:

- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.

- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.

- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.

- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.

Netfilter:

- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.

- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.

- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.

Protocols:

- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core

- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.

- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.

- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.

- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.

- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).

- Support ipv4-mapped ipv6 address clients in smc-r v2.

- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.

- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.

Driver API:

- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.

- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.

- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.

- Consolidate DSA drivers Energy Efficiency Ethernet support.

- Add EEE management to phylink, making use of the phylib
implementation.

- Add phylib support for in-band capabilities negotiation.

- Simplify how phylib-enabled mac drivers expose the supported
interfaces.

Tests and tooling:

- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.

- Increase TCP selftest coverage importing several packetdrill
test-cases.

- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.

- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering

- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit

- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support

- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation

- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration

- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274

- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"

* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge branch 'net-lan969x-add-fdma-support'

Daniel Machon says:

====================
net: lan969x: add FDMA support

== Description:

This series is the last of a multi-part series, that prepares a

Merge branch 'net-lan969x-add-fdma-support'

Daniel Machon says:

====================
net: lan969x: add FDMA support

== Description:

This series is the last of a multi-part series, that prepares and adds
support for the new lan969x switch driver.

The upstreaming efforts has been split into multiple series:

1) Prepare the Sparx5 driver for lan969x (merged)

2) Add support for lan969x (same basic features as Sparx5
provides excl. FDMA and VCAP, merged).

3) Add lan969x VCAP functionality (merged).

4) Add RGMII support (merged).

--> 5) Add FDMA support.

== FDMA support:

The lan969x switch device uses the same FDMA engine as the Sparx5 switch
device, with the same number of channels etc. This means we can utilize
the newly added FDMA library, that is already in use by the lan966x and
sparx5 drivers.

As previous lan969x series, the FDMA implementation will hook into the
Sparx5 implementation where possible, however both RX and TX handling
will be done differently on lan969x and therefore requires a separate
implementation of the RX and TX path.

Details are in the commit description of the individual patches

== Patch breakdown:

Patch #1: Enable FDMA support on lan969x
Patch #2: Split start()/stop() functions
Patch #3: Activate TX FDMA in start()
Patch #4: Ops out a few functions that differ on the two platforms
Patch #5: Add FDMA implementation for lan969x

v1: https://lore.kernel.org/20250109-sparx5-lan969x-switch-driver-5-v1-0-13d6d8451e63@microchip.com
====================

Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-0-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: lan969x: add FDMA implementation

The lan969x switch device supports manual frame injection and extraction
to and from the switch core, using a number of injection and extraction
queues. This t

net: lan969x: add FDMA implementation

The lan969x switch device supports manual frame injection and extraction
to and from the switch core, using a number of injection and extraction
queues. This technique is currently supported, but delivers poor
performance compared to Frame DMA (FDMA).

This lan969x implementation of FDMA, hooks into the existing FDMA for
Sparx5, but requires its own RX and TX handling, as lan969x does not
support the same native cache coherency that Sparx5 does. Effectively,
this means that we are going to use the DMA mapping API for mapping and
unmapping TX buffers. The RX loop will utilize the page pool API for
efficient RX handling. Other than that, the implementation is largely
the same, and utilizes the FDMA library for DCB and DB handling.

Some numbers:

Manual injection/extraction (before this series):

// iperf3 -c 1.0.1.1

[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.02 sec 345 MBytes 289 Mbits/sec sender
[ 5] 0.00-10.06 sec 345 MBytes 288 Mbits/sec receiver

FDMA (after this series):

// iperf3 -c 1.0.1.1

[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.03 sec 1.10 GBytes 940 Mbits/sec sender
[ 5] 0.00-10.07 sec 1.10 GBytes 936 Mbits/sec receiver

Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-5-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

spi: Merge up v6.13-rc6

This fixes the i.MX6 and newer Meson platforms in my CI.

Expand SoundWire MBQ register map support

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add

Expand SoundWire MBQ register map support

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.

Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.

show more ...

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.13-rc3).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kub

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.13-rc3).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

drm-next has the dmem cgroup patches we need to merge fixes for.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Backmerge to get the DRM DP payload and ACT helpers to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'locking/urgent'

Sync with urgent -- avoid conflicts.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.13-rc3' into drm-next

Backmerge linux 6.13-rc3 as amd next has some dependencies on fixes in it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'asoc-fix-v6.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A mix of quirks and small fixes, nothing too major anywhere.

Merge tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.

Current r

Merge tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter and wireless.

Current release - fix to a fix:

- rtnetlink: fix error code in rtnl_newlink()

- tipc: fix NULL deref in cleanup_bearer()

Current release - regressions:

- ip: fix warning about invalid return from in ip_route_input_rcu()

Current release - new code bugs:

- udp: fix L4 hash after reconnect

- eth: lan969x: fix cyclic dependency between modules

- eth: bnxt_en: fix potential crash when dumping FW log coredump

Previous releases - regressions:

- wifi: mac80211:
- fix a queue stall in certain cases of channel switch
- wake the queues in case of failure in resume

- splice: do not checksum AF_UNIX sockets

- virtio_net: fix BUG()s in BQL support due to incorrect accounting
of purged packets during interface stop

- eth:
- stmmac: fix TSO DMA API mis-usage causing oops
- bnxt_en: fixes for HW GRO: GSO type on 5750X chips and oops
due to incorrect aggregation ID mask on 5760X chips

Previous releases - always broken:

- Bluetooth: improve setsockopt() handling of malformed user input

- eth: ocelot: fix PTP timestamping in presence of packet loss

- ptp: kvm: x86: avoid "fail to initialize ptp_kvm" when simply not
supported"

* tag 'net-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: dsa: tag_ocelot_8021q: fix broken reception
net: dsa: microchip: KSZ9896 register regmap alignment to 32 bit boundaries
net: renesas: rswitch: fix initial MPIC register setting
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
Bluetooth: iso: Fix circular lock in iso_conn_big_sync
Bluetooth: iso: Fix circular lock in iso_listen_bis
Bluetooth: SCO: Add support for 16 bits transparent voice setting
Bluetooth: iso: Fix recursive locking warning
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
Bluetooth: hci_core: Fix sleeping function called from invalid context
team: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
team: Fix initial vlan_feature set in __team_compute_features
bonding: Fix feature propagation of NETIF_F_GSO_ENCAP_ALL
bonding: Fix initial {vlan,mpls}_feature set in bond_compute_features
net, team, bonding: Add netdev_base_features helper
net/sched: netem: account for backlog updates from child qdisc
net: dsa: felix: fix stuck CPU-injected packets with short taprio windows
splice: do not checksum AF_UNIX sockets
net: usb: qmi_wwan: add Telit FE910C04 compositions
...

show more ...

Merge branch 'net-sparx5-lan969x-fixes'

Daniel Machon says:

====================
net: sparx5: misc fixes for sparx5 and lan969x

This series fixes various issues in the Sparx5 and lan969x drivers.

Merge branch 'net-sparx5-lan969x-fixes'

Daniel Machon says:

====================
net: sparx5: misc fixes for sparx5 and lan969x

This series fixes various issues in the Sparx5 and lan969x drivers. Most
of the fixes are for new issues introduced by the recent series adding
lan969x switch support in the Sparx5 driver.

Most notable is patch 1/5 that moves the lan969x dir into the sparx5
dir, in order to address a cyclic dependency issue reported by depmod,
when installing modules. Details are in the commit descriptions.

To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
To: Steen Hegelund <Steen.Hegelund@microchip.com>
To: UNGLinuxDriver@microchip.com
To: Richard Cochran <richardcochran@gmail.com>
To: Bjarni Jonasson <bjarni.jonasson@microchip.com>
To: jensemil.schulzostergaard@microchip.com
To: horatiu.vultur@microchip.com
To: arnd@arndb.de
To: jacob.e.keller@intel.com
To: Parthiban.Veerasooran@microchip.com
Cc: Calvin Owens <calvin@wbinvd.org>
Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
====================

Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: lan969x: fix cyclic dependency reported by depmod

Depmod reports a cyclic dependency between modules sparx5-switch.ko and
lan969x-switch.ko:

depmod: ERROR: Cycle detected: lan969x_switch -> sp

net: lan969x: fix cyclic dependency reported by depmod

Depmod reports a cyclic dependency between modules sparx5-switch.ko and
lan969x-switch.ko:

depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch
depmod: ERROR: Found 2 modules in dependency cycles!
make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make: *** [Makefile:224: __sub-make] Error 2

This makes sense, as they both require symbols from each other.

Fix this by compiling lan969x support into the sparx5-switch.ko module.
In order to do this, in a sensible way, we move the lan969x/ dir into
the sparx5/ dir and do some code cleanup of code that is no longer
required.

After this patch, depmod will no longer complain, as lan969x support is
compiled into the sparx5-swicth.ko module, and can no longer be compiled
as a standalone module.

Fixes: 98a01119608d ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>