Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing l

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Replace busylock at the Tx queuing layer with a lockless list.

Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.

- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.

Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.

Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.

- Optimize the NAPI skb cache, make it larger, use it in more paths.

- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).

- Various data structure layout and prefetch optimizations from Eric.

- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.

- Extend threaded NAPI polling to allow the kthread busy poll for
packets.

- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.

- Support memcg accounting of MPTCP socket memory.

- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.

- Improve heuristics for when to kick off AF_UNIX garbage collection.

- Allow users to control TCP SACK compression, and default to 33% of
RTT.

- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.

- Preserve skb metadata space across skb_push / skb_pull operations.

- Support for IPIP encapsulation in the nftables flowtable offload.

- Support appending IP interface information to ICMP messages (RFC
5837).

- Support setting max record size in TLS (RFC 8449).

- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

- Let users configure the number of write buffers in SMC.

- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.

- Some conversions away from the crypto_ahash API, from Eric Biggers.

- Some preparations for slimming down struct page.

- YAML Netlink protocol spec for WireGuard.

- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.

Driver API:

- Add CAN XL support to the CAN Netlink interface.

- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.

- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).

- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.

- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.

- Add standard device stats for PSP crypto offload.

- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.

- Add uAPI defines for 1.6Tbps link modes.

Device drivers:

- Add Motorcomm YT921x gigabit Ethernet switch support.

- Add MUCSE driver for N500/N210 1GbE NIC series.

- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.

- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.

- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules

- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device

- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices

- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control

- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality

- Bluetooth:
- add initial support for PASTa

- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements

- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...

show more ...

Merge branch 'net-phy-add-support-for-fbnic-phy-w-25g-50g-and-100g-support'

Alexander Duyck says:

====================
net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support

To transiti

Merge branch 'net-phy-add-support-for-fbnic-phy-w-25g-50g-and-100g-support'

Alexander Duyck says:

====================
net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support

To transition the fbnic driver to using the XPCS driver we need to address
the fact that we need a representation for the FW managed PMD that is
actually a SerDes PHY to handle link bouncing during link training.

This patch set introduces the necessary bits to the XPCS driver code to
enable it to read 25G, 50G, and 100G speeds from the PCS ctrl1 register,
and adds support for the approriate interfaces.

The rest of this patch set enables the changes to fbnic to make use of
these interfaces and expose a PMD that can provide a necessary link delay
to avoid link flapping in the event that a cable is disconnected and
reconnected, and to correctly expose the count for the link down events.

With this we have the basic groundwork laid as with this all the bits and
pieces are in place in terms of reading the configuration. The general plan
for follow-on patch sets is to start looking at enabling changing the
configuration in environments where that is supported.
====================

Link: https://patch.msgid.link/176374310349.959489.838154632023183753.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

fbnic: Replace use of internal PCS w/ Designware XPCS

As we have exposed the PCS registers via the SWMII we can now start looking
at connecting the XPCS driver to those registers and let it mange th

fbnic: Replace use of internal PCS w/ Designware XPCS

As we have exposed the PCS registers via the SWMII we can now start looking
at connecting the XPCS driver to those registers and let it mange the PCS
instead of us doing it directly from the fbnic driver.

For now this just gets us the ability to detect link. The hope is in the
future to add some of the vendor specific registers to begin enabling XPCS
configuration of the interface.

Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://patch.msgid.link/176374325295.959489.14521115864034905277.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'add-aarch64-support-for-fbnic'

Dimitri Daskalakis says:

====================
Add aarch64 support for FBNIC

We need to support aarch64 with 64K PAGE_SIZE, and I uncovered an issue
dur

Merge branch 'add-aarch64-support-for-fbnic'

Dimitri Daskalakis says:

====================
Add aarch64 support for FBNIC

We need to support aarch64 with 64K PAGE_SIZE, and I uncovered an issue
during testing.
====================

Link: https://patch.msgid.link/20251013211449.1377054-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: fbnic: Allow builds for all 64 bit architectures

This enables aarch64 testing, but there's no reason we cannot support other
architectures.

Signed-off-by: Dimitri Daskalakis <dimitri.daskalaki

net: fbnic: Allow builds for all 64 bit architectures

This enables aarch64 testing, but there's no reason we cannot support other
architectures.

Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013211449.1377054-3-dimitri.daskalakis1@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Implement the Device Memory TCP transmit path, allo

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.

- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.

- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.

- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.

- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.

- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.

- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.

Netfilter:

- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.

- Implement support for wildcard netdevice in netdev basechain and
flowtables.

- Integrate conntrack information into nft trace infrastructure.

- Export set count and backend name to userspace, for better
introspection.

BPF:

- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.

- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.

Protocols:

- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.

- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.

- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.

- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.

- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.

- Extend TCP drop-reason support to cover PAWS checks.

Driver API:

- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.

- Converted several device drivers to timestamping APIs.

- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.

Tests and tooling:

- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.

- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.

- Extend MPTCP selftests to improve the code-coverage.

- Add tests for XDP tail adjustment in AF_XDP.

New hardware / drivers:

- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.

- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.

- Broadcom asp-v3.0 ethernet driver.

- AMD Renoir ethernet device.

- ReakTek MT9888 2.5G ethernet PHY driver.

- Aeonsemi 10G C45 PHYs driver.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices

- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops

- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support

- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs

- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.

- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna

- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"

* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...

show more ...

Merge branch 'eth-fbnic-add-devlink-dev-flash-support'

Lee Trager says:

====================
eth: fbnic: Add devlink dev flash support

fbnic supports updating firmware using signed PLDM images. PL

Merge branch 'eth-fbnic-add-devlink-dev-flash-support'

Lee Trager says:

====================
eth: fbnic: Add devlink dev flash support

fbnic supports updating firmware using signed PLDM images. PLDM images are
written into the flash. Flashing does not interrupt the operation of the
device.

V4: https://lore.kernel.org/netdev/20250510002851.3247880-1-lee@trager.us/T/#t
V3: https://lore.kernel.org/lkml/20241111043058.1251632-1-lee@trager.us/T/
V2: https://lore.kernel.org/all/20241022013941.3764567-1-lee@trager.us/
====================

Link: https://patch.msgid.link/20250512190109.2475614-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

eth: fbnic: Add devlink dev flash support

Add support to update the CMRT and control firmware as well as the UEFI
driver on fbnic using devlink dev flash.

Make sure the shutdown / quiescence paths

eth: fbnic: Add devlink dev flash support

Add support to update the CMRT and control firmware as well as the UEFI
driver on fbnic using devlink dev flash.

Make sure the shutdown / quiescence paths like suspend take the devlink
lock to prevent them from interrupting the FW flashing process.

Signed-off-by: Lee Trager <lee@trager.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512190109.2475614-6-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>